dku2libusb problems

[andrew teo]

Hi everyone!
I have connected my Nokia 6100 via CA42.
I have gotten usbserial working so my phone is recognised as ttyUSB0.
I have used model = 6100 and connection = dku2libusb. Gnokii was compiled
with libusb support (besides this, are there any more steps to get
dku2libusb working?)
However, when I issue gnokii --identify, the message (right below) occurs. 
Any ideas? Thanks!

address@hidden ~]# gnokii --identify
GNOKII Version 0.6.14
LOG: debug mask is 0x1
phone instance config:
model: 6100
port_device: /dev/ttyUSB0
connection_type: 10
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 14
sm_retry: off
Connecting
Serial device: opening device /dev/ttyUSB0
Couldn't open PHONET device: Inappropriate ioctl for device
Error in link initialisation: 1
Telephone interface init failed: Command failed.
Quitting.
Command failed.
Serial device: closing device

-- 
View this message in context: 
http://www.nabble.com/dku2libusb-problems-tf2658243.html#a7414878
Sent from the gnokii-users mailing list archive at Nabble.com.