[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Initialization failed (11) for T230 + DCU-11

From: munsoar
Subject: Initialization failed (11) for T230 + DCU-11
Date: Tue, 22 May 2007 12:52:24 -0700 (PDT)

According to
this page  gnokii shall work fine with T230 and DCU-11.

But I have some problem when I try to verify that everything is correct by
using gnokii --identify and get the following output:

GNOKII Version 0.6.14
LOG: debug mask is 0x1
phone instance config:
model: AT
port_device: /dev/ttyUSB0
connection_type: 0
init_length: 0
serial_baudrate: 9600
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
rfcomm_cn: 1
sm_retry: off
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ
write: [ATZ<cr>]
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1
write: [ATE1<cr>]
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1
write: [AT+CMEE=1<cr>]
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM
write: [AT+CGMM<cr>]
Message sent: 0x06 / 0x0007
41 54 2b 47 4d 4d 0d                            | AT+GMM
write: [AT+GMM<cr>]
Initialization failed (11)
Telephone interface init failed: Command timed out.
Command timed out.

I have tried to find what "Initialization failed (11)" means but have only
found a message from a person that also want to know what the problem is.

View this message in context:
Sent from the gnokii-users mailing list archive at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]