GNOKII Version 0.6.19
LOG: debug mask is 0x1
Config read from file /home/user/.gnokiirc.
phone instance config:
model: 6510
port_device: /dev/ttyUSB0
connection_type: 2
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
rfcomm_cn: 1
sm_retry: off
Connecting
####init seq:2
Serial device: opening device /dev/ttyUSB0
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
SM_Block: exiting the retry loop
Serial device: closing device
####init seq:2
Serial device: opening device /dev/ttyUSB0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Error in link initialisation: 4
Telephone interface init failed: Problem occurred internal to model specific code.
Quitting.
Cannot unlock device.
Problem occurred internal to model specific code.