[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: New phone needs new settings

From: Laura Conrad
Subject: Re: New phone needs new settings
Date: Fri, 09 May 2008 18:06:14 -0400
User-agent: Gnus/5.11 (Gnus v5.11) Emacs/22.1.50 (gnu/linux)

>>>>> "Daniele" == Daniele Forsi <address@hidden> writes:

    Daniele> 2008/5/9 Laura Conrad:
    >> 3450.928770] usb 2-2: new full speed USB device using uhci_hcd and 
address 6
    >> [ 4206.140464] usb 2-2: USB disconnect, address 6

    Daniele> uhci_hcd talks to USB 1.1
    Daniele> make sure you're using an USB 2.0 port and it should work like your
    Daniele> old phone (i.e. limited functionality with model = AT) because the
    Daniele> DKE-2 cable is supported by the cdc_acm kernel module, I just 
    Daniele> with this

Thanks, this is what I needed to know.

It turns out that on Ubuntu Hardy Heron, I needed to "modprobe
cdc_acm", and to run as root.  I'm sure neither of those things should
be necessary, but at least I believe I'll be able to get a data plan
and use my new phone as a modem the next time I leave civilization for
a place with no DSL.

    Daniele> try to use Buetooth as Pawel suggested: you'll probably get more
    Daniele> functionality with model = series40
    Daniele> but I think nobody has tested a Series 40 5th Ed. yet

I'll test it if I get a bluetooth module; there's no emergency about
that though.

Laura   (mailto:address@hidden )
(617) 661-8097  233 Broadway, Cambridge, MA 02139   

I had to breathe more frequently (but take smaller breaths), but also
to use all the air I had in reserve, and not mistake the lack of
oxygen for the need to breathe.

Eric Haas (on learning Baroque flute after playing oboe)

reply via email to

[Prev in Thread] Current Thread [Next in Thread]