[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Nokia E71: identified as AT/usb but memory not accessible

From: Enrique Costa
Subject: Re: Nokia E71: identified as AT/usb but memory not accessible
Date: Wed, 17 Jun 2009 16:16:02 +0200
User-agent: Thunderbird (X11/20090320)

Thanks, Pawel, for your fast answer!
I have been working some hours following this thread but it doesn't work.

The point is that I'm working with Fedora 10 and F10 provides a new Opensync version, 0.36, which doesn't work. So I would get the 0.22 version with all the related packages, which doesn't seem to be very easy. I'm going to look at the other option you suggested, the one based on syncml-ds-tool. The last solution would be to wait, either to the 0.40 opensync version or to a KDE4-PIM-Akonadi solution.
Thanks again for your help

Pawel Kot escribió:

On Fri, Jun 12, 2009 at 10:30, Enrique Costa<address@hidden> wrote:
I'm trying to access my new Nokia E71 from my Fedora 10/KDE Laptop.

As I read how strange is the new Nokia E series I tried the basic access,
whis should be AT and usb.
So, I get my phone identified but I don't get the backup of my phonebook
which is my objectiv.

Would you like to help me?

It's not possible with gnokii right now. The way I recommend is to use
opensync for that purpose.
This is the way how I do it:
$ msynctool --version
This is msynctool version "0.22"
using OpenSync version "0.22"
$ msynctool --showgroup e712file
Groupname: e712file
Member 1: syncml-obex-client
        Configuration : <?xml version="1.0"?>
  <!-- (Only for bluetooth) The bluetooth address if the bluetooth
mode is selected -->

  <!-- (Only for bluetooth) The bluetooth channel to use. `sdptool
browse $MAC` to search for the correct channel -->

  <!-- (Only for USB) The usb interface number of the SYNCML-SYNC
target. use syncml-obex-client -u (you will need access to the USB raw
device) to find it. -->

  <!-- The string that the plugin will use to identify itself. Some
devices need a special string here. -->
  <identifier>PC Suite</identifier>

  <!-- The syncml version to use: 0 for 1.0, 1 for 1.1 and 2 for 1.2 -->

  <!-- if the plugin should use wbxml -->

  <!-- The username to use. Leave empty to not require a username -->

  <!-- the password for the username -->

  <!-- sets the connection type to use. 5 means obex over usb, 2 means
obex over bluetooth -->

  <!-- If wbxml is enabled, defines wether the wbxml should use string
tables -->

  <!-- Never send ADD command, but send REPLACE (not needed normally) -->

  <!-- Workaround around for mobile phones which only use local
timestamps and _no_ UTC timestamps! -->

  <!-- Sets the maximum allowed size in bytes of incoming messages
(some device need this option set). Example: 10000 -->


  <!-- The name of the contacts db. Must be the same as the phones sends -->

  <!-- The name of the calendar db. Must be the same as the phones sends -->

  <!-- The name of the note db. Must be the same as the phones sends -->
Member 2: file-sync
        Configuration : <?xml version="1.0"?>
  <!-- directory path for file-sync -->

  <!-- should care of subdirectories (TRUE or FALSE) -->
$ msynctool --sync e712file

Be sure you use last version of wbxml.

take care,

reply via email to

[Prev in Thread] Current Thread [Next in Thread]