[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
gnokii and Nokia Card Phone RPM-3 GSM900/1800
From: |
Vieri |
Subject: |
gnokii and Nokia Card Phone RPM-3 GSM900/1800 |
Date: |
Wed, 1 Jul 2009 00:48:11 -0700 (PDT) |
Hello,
I'm trying to send a basic text SMS with gnokii connected via serial cable to a
Nokia Card Phone RPM-3 GSM900/1800.
I am not able to send anything because it seems that the AT command sequence
may be wrong for this particular model. I am using the default gnokiirc with
model=AT and port=/dev/ttyS0 under Linux.
>From previous manual research in a Windows environment (hyperterminal), it was
>determined that the correct sequence of commands to send an SMS is:
AT+CMGS=?
AT+CMGF=1
AT+CMGS="<destination_number>"
"MESSAGE"
<ctrl-Z/ESC>
Gnokii is failing as shown in the log files I'm attaching.
I've also tried the -C 0,1,2,3 option with the gnokii --sendsms command line
but I'm still not able to send a message.
Note: I am not using smsd, just "gnokii --sendsms ...".
Any ideas?
How can I customize gnokii's AT command sequence?
Regards,
Vieri
gnokii_sendsms.tgz
Description: Binary data
- gnokii and Nokia Card Phone RPM-3 GSM900/1800,
Vieri <=
- Re: gnokii and Nokia Card Phone RPM-3 GSM900/1800, Vieri, 2009/07/01
- Re: gnokii and Nokia Card Phone RPM-3 GSM900/1800, Vieri, 2009/07/01
- Re: gnokii and Nokia Card Phone RPM-3 GSM900/1800, Vieri, 2009/07/01
- Re: gnokii and Nokia Card Phone RPM-3 GSM900/1800, Vieri, 2009/07/01
- Re: gnokii and Nokia Card Phone RPM-3 GSM900/1800, Vieri, 2009/07/01
- Re: gnokii and Nokia Card Phone RPM-3 GSM900/1800, Vieri, 2009/07/01