[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Nokia 6210 Stopped Working

From: Chris Bartram
Subject: RE: Nokia 6210 Stopped Working
Date: Wed, 14 Oct 2009 10:01:25 +0100


Hi Dave

Have you tried stopping the Nagios stuff for a while, so it doesn't
access the port, and then use minicom or similar pointed at the serial
port at the correct speed? 

Type an AT [return] and I'd expect the phone to respond. If it does, try
model=at and see if Gnokii responds.

If it doesn't respond, you may want to check that serial port. If you
loop pins 2 and 3, and type in minicom, you should get it echoed back.

I'm using a 6210 myself, and I think I'm using AT with it. There's some
about on Ebay, but they are not cheap :-(.


This e-mail may contain confidential and/or privileged information. It is for 
the exclusive use of the intended recipient(s). If you are not the intended 
recipient(s), you must not use, distribute, copy or take any action in reliance 
on it, since to do so is strictly prohibited and may be unlawful. If you have 
received this e-mail in error, please return it to the sender immediately and 
delete it from your system. E-mail messages are not secure and attachments may 
contain software viruses which may damage your system. Whilst we have taken 
every reasonable precaution to minimise this risk, we cannot accept any 
liability for any damage which you sustain as a result of these factors. You 
are advised to carry out your own virus checks before opening any attachment. 
Any views or opinions expressed in this e-mail are solely those of the author 
and do not represent those of the NASUWT unless otherwise stated.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]