[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Alerts through Nagios very temperamental

From: Andrew Thompson
Subject: RE: Alerts through Nagios very temperamental
Date: Thu, 22 Dec 2011 12:34:47 +0000


Read Wiki, tried all combinations of port/model and connection and none of them 
work apart from my original settings.

Port = /dev/ttyACM0
Model = AT
Connection = serial

The only other 1 that worked was

Port = /dev/ttyUSB0
Model = series40
Connection = dlr3

Gnokii --identify worked but still got the same errors when trying to start the 

I give up, ill just put up with missing text messages!


Kind Regards

-----Original Message-----
From: address@hidden [mailto:address@hidden On Behalf Of Pawel Kot
Sent: 22 December 2011 12:11
To: Discussion forum for gnokii users.
Subject: Re: Alerts through Nagios very temperamental


On Thu, Dec 22, 2011 at 13:04, Andrew Thompson <address@hidden> wrote:
> Tried series40 driver as it stands and it hangs at

You changed only model and not connection and port. Right? That's why I 
referred you to wiki. You'll need to change these two as well.

> Presume this is why I need to upgrade gnokii?

No. You'll find the reasons for that later on.

> However the Ubuntu software centre says 6.29 is the latest but I see 
> at this site there is a 6.31
> Could you please tell me how I would install this please as the last gnokii 
> was done automatically through the software centre.

Oh, there is not 0.6.31 at ppa yet. Didn't manage to make it yet.

So I can see the following options:
 - compile on your own
 - compile on your own and make deb and install
 - take 0.6.31 deb from Debian
 - ask someone to do the second option.

take care,
Pawel Kot

gnokii-users mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]