smsd Mac OS X crash EXC_BAD_ACCESS

[helpFractal]

When I run /opt/local/bin/smsd -u smsd -p smsd -d online_smsd -c localhost -m
mysql I get this...

smsd - version 1.5.2 from gnokii 0.6.31
LOG: debug mask is 0x1
LOG: xdebug mask is 0x1
Config read from file /Users/fractal/.gnokiirc.
Lockfile /var/lock/LCK..cu.HUAWEIMobile-Modem is stale. Overriding it...
phone instance config:
model = AT
port = /dev/cu.HUAWEIMobile-Modem
connection = serial
initlength = default
serial_baudrate = 9600
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 120


... when I run it through the debugger (gdb) I get this ...


(gdb) run -u smsd -p smsd -d online_smsd -c localhost -m mysql
Starting program: /opt/local/bin/smsd -u smsd -p smsd -d online_smsd -c
localhost -m mysql
Reading symbols for shared libraries .. done
Reading symbols for shared libraries ..... done
smsd - version 1.5.2 from gnokii 0.6.31
LOG: debug mask is 0x1
LOG: xdebug mask is 0x1
Config read from file /Users/fractal/.gnokiirc.
Lockfile /var/lock/LCK..cu.HUAWEIMobile-Modem is stale. Overriding it...
phone instance config:
model = AT
port = /dev/cu.HUAWEIMobile-Modem
connection = serial
initlength = default
serial_baudrate = 9600
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 120
Initializing AT capable mobile phone ...
Serial device: opening device /dev/cu.HUAWEIMobile-Modem
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ             
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK       
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1            
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK      
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1       
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK 
Received message type 00

Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: KERN_PROTECTION_FAILURE at address: 0x0000000100700000
[Switching to process 31676 thread 0x1503]
0x00007fff8d690c55 in bzero$VARIANT$sse2 ()
(gdb) bt
#0  0x00007fff8d690c55 in bzero$VARIANT$sse2 ()
#1  0x00000001000eeb7e in gn_data_clear ()
#2  0x0000000100118832 in Functions ()
#3  0x00000001000cf5fd in gn_gsm_initialise ()
#4  0x00000001000ce86b in gn_lib_phone_open ()
#5  0x00000001000026c6 in Connect ()
#6  0x00007fff8d6a3742 in _pthread_start ()
#7  0x00007fff8d690181 in thread_start ()
(gdb) 


... so there is something not quite right. I am not sure how to compile
gnokii in debug mode (as I am installing from macports) so am a bit stuck in
determining which file is causing this problem.

Any help would be greatly appreciated.

-- 
View this message in context: 
http://old.nabble.com/smsd-Mac-OS-X-crash-EXC_BAD_ACCESS-tp34920693p34920693.html
Sent from the gnokii-users mailing list archive at Nabble.com.