[PATCH v2 07/14] website: docs: install: flashrom: add support for BSD.

[Denis 'GNUtoo' Carikli]

From: Leah Rowe <leah@libreboot.org>

Signed-off-by: Leah Rowe <leah@libreboot.org>
Signed-off-by: Leah Rowe <info@minifree.org>
GNUtoo: fixed section underline, rebased, commit message, split patch.
Acked-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Acked-by: Adrien 'neox' Bourmault <neox@gnu.org>
---
ChangeLog:
- Added neox's Ack.
---
 website/pages/docs/install/install.md | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/website/pages/docs/install/install.md 
b/website/pages/docs/install/install.md
index 4c75670..3e4d1ca 100644
--- a/website/pages/docs/install/install.md
+++ b/website/pages/docs/install/install.md
@@ -5,11 +5,6 @@ x-unreviewed: true
 
 This section relates to installing GNU Boot on supported targets.
 
-NOTE: if running `flashrom -p internal` for software based flashing, and you
-get an error related to `/dev/mem` access, you should reboot with
-`iomem=relaxed` kernel parameter before running flashrom, or use a kernel that
-has `CONFIG_STRICT_DEVMEM` not enabled.
-
 GNU Boot flashing can be risky business. Please ensure that you have external
 flashing equipment, in case anything goes wrong. The general rule of thumb with
 firmware is this: if it's non-free, replace it, but if you're already running
@@ -21,6 +16,25 @@ If you're already running libre firmware on your board, you 
should decide for
 sure whether you wish to risk it. See changelogs on
 the [release announcements via the news page](/news/) and decide for yourself.
 
+FLASH ERRORS (and workarounds)
+==============================
+
+Right out of the gate, some users may experience errors with flashrom when
+using the internal programmer. They are:
+
+/dev/mem access error
+---------------------
+
+NOTE: if running `flashrom -p internal` for software based flashing, and you
+get an error related to `/dev/mem` access, you should reboot with
+`iomem=relaxed` kernel parameter before running flashrom, or use a kernel that
+has `CONFIG_STRICT_DEVMEM` not enabled.
+
+On NetBSD and OpenBSD systems, the equivalent to `iomem=relaxed` in this case
+is `kernel.securelevel=-1`; see [NetBSD securelevel
+manual](https://wiki.netbsd.org/tutorials/kernel_secure_levels/)
+and [OpenBSD securelevel manual](https://man.openbsd.org/securelevel).
+
 About ROM image file names
 ==========================
 
-- 
2.45.1