[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Gnumed-devel] <bug>: close application
|
From: |
gnumed |
|
Subject: |
[Gnumed-devel] <bug>: close application |
|
Date: |
Tue, 24 Jun 2008 01:44:07 -0400 |
Report sent via GNUmed's handler for unexpected exceptions:
close application
2008-06-23 23:07:08
------------------------------------------------------------
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmLog.py:address@hidden):
SECURITY: initial log level is [INFO]
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmLog.py:address@hidden):
instantiated log file [/home/pedro/.gnumed/gnumed.log] with ID
[/home/pedro/.gnumed/gnumed.log]
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:<module>@24):
$Revision: 1.43 $
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmLog.py:address@hidden):
SECURITY: log level change from [INFO] to [DATA]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCLI.py:<module>@140):
$Revision: 1.3 $
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCLI.py:address@hidden):
unparsed command line is
>>/var/lib/python-support/python2.5/Gnumed/wxpython/gnumed.py<<
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCLI.py:address@hidden):
command line arguments: {}
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:<module>@57):
$Revision: 1.33 $
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
unmodified startup locale settings (should be [C])
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
current locale settings:
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(): (None, None)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_NUMERIC): (None, None)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_MESSAGES): (None, None)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_MONETARY): (None, None)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_COLLATE): (None, None)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_CTYPE): (None, None)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_TIME): (None, None)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_NUMERIC): C)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_MESSAGES): C)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_MONETARY): C)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_COLLATE): C)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_CTYPE): C)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_ALL): C)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_TIME): C)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getdefaultlocale() - default (user) locale: ('es_ES', 'UTF8')
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
encoding sanity check (also check "locale.nl_langinfo(CODESET)" below):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
sys.getdefaultencoding(): [ascii]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getpreferredencoding(): [ANSI_X3.4-1968]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getlocale()[1]: [None]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
sys.getfilesystemencoding(): [UTF-8]
2008-06-23 23:07:08 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
encoding suggested by locale (ANSI_X3.4-1968) does not match encoding currently
set in locale (None)
2008-06-23 23:07:08 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
this might lead to encoding errors
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
<codecs> module CAN handle encoding [ANSI_X3.4-1968]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
<codecs> module CAN handle encoding [ascii]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
<codecs> module CAN handle encoding [UTF-8]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
on Linux you can determine a likely candidate for the encoding by running
"locale charmap"
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale related environment variables (${LANG} is typically used):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LANGUAGE} not set
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LC_ALL} not set
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LC_CTYPE} not set
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LANG}=es_ES.UTF-8
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
database of locale conventions:
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_decimal_point):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(int_frac_digits): 127
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_sep_by_space): 127
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(frac_digits): 127
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(thousands_sep):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_sign_posn): 127
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(decimal_point): .
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(int_curr_symbol):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_cs_precedes): 127
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_sign_posn): 127
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_thousands_sep):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(negative_sign):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(currency_symbol):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_sep_by_space): 127
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_grouping): []
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_cs_precedes): 127
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(positive_sign):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(grouping): []
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(D_FMT): %m/%d/%y
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(D_T_FMT): %a %b %e %H:%M:%S %Y
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(YESEXPR): ^[yY]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ALT_DIGITS):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(T_FMT_AMPM): %I:%M:%S %p
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(RADIXCHAR): .
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA_D_FMT):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(T_FMT): %H:%M:%S
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(NOEXPR): ^[nN]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(CRNCYSTR): -
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(CODESET): ANSI_X3.4-1968
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(THOUSEP):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA_D_T_FMT):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
activating user-default locale with <locale.setlocale(locale.LC_ALL, '')>
returns: [es_ES.UTF-8]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale settings after activating user-default locale
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
current locale settings:
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(): ('es_ES', 'UTF8')
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_NUMERIC): ('es_ES', 'UTF8')
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_MESSAGES): ('es_ES', 'UTF8')
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_MONETARY): ('es_ES', 'UTF8')
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_COLLATE): ('es_ES', 'UTF8')
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_CTYPE): ('es_ES', 'UTF8')
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_TIME): ('es_ES', 'UTF8')
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_NUMERIC): es_ES.UTF-8)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_MESSAGES): es_ES.UTF-8)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_MONETARY): es_ES.UTF-8)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_COLLATE): es_ES.UTF-8)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_CTYPE): es_ES.UTF-8)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_ALL): es_ES.UTF-8)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_TIME): es_ES.UTF-8)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getdefaultlocale() - default (user) locale: ('es_ES', 'UTF8')
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
encoding sanity check (also check "locale.nl_langinfo(CODESET)" below):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
sys.getdefaultencoding(): [ascii]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getpreferredencoding(): [UTF-8]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getlocale()[1]: [UTF8]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
sys.getfilesystemencoding(): [UTF-8]
2008-06-23 23:07:08 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
encoding suggested by locale (UTF-8) does not match encoding currently set in
locale (UTF8)
2008-06-23 23:07:08 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
this might lead to encoding errors
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
<codecs> module CAN handle encoding [UTF-8]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
<codecs> module CAN handle encoding [UTF8]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
<codecs> module CAN handle encoding [ascii]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
<codecs> module CAN handle encoding [UTF-8]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
on Linux you can determine a likely candidate for the encoding by running
"locale charmap"
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale related environment variables (${LANG} is typically used):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LANGUAGE} not set
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LC_ALL} not set
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LC_CTYPE} not set
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LANG}=es_ES.UTF-8
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
database of locale conventions:
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_decimal_point): ,
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(int_frac_digits): 2
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_sep_by_space): 1
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(frac_digits): 2
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(thousands_sep):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_sign_posn): 1
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(decimal_point): ,
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(int_curr_symbol): EUR
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_cs_precedes): 1
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_sign_posn): 1
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_thousands_sep): .
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(negative_sign): -
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(currency_symbol): ???
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_sep_by_space): 1
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_grouping): [3, 3, 0]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_cs_precedes): 1
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(positive_sign):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(grouping): []
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(D_FMT): %d/%m/%y
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(D_T_FMT): %a %d %b %Y %T %Z
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(YESEXPR): ^[sSyY].*
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ALT_DIGITS):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(T_FMT_AMPM):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(RADIXCHAR): ,
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA_D_FMT):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(T_FMT): %T
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(NOEXPR): ^[nN].*
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(CRNCYSTR): -???
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(CODESET): UTF-8
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(THOUSEP):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA_D_T_FMT):
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
splitting canonical locale [es_ES] into levels
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
system locale levels: {'country': 'es_ES', 'full': 'es_ES', 'language': 'es'}
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
text domain is [gnumed]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
searching message catalog file for system locale [es_ES]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LANGUAGE} = [None]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LC_ALL} = [None]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LC_MESSAGES} = [None]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${LANG} = [es_ES.UTF-8]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
system is POSIX, looking in standard locations (see Python Manual)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
looking at ${GNUMED_DIR}
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
${GNUMED_DIR} not set
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
looking above binary install directory
[/var/lib/python-support/python2.5/Gnumed/locale]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
looking in binary install directory
[/var/lib/python-support/python2.5/Gnumed/wxpython/locale]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
trying [/usr/share/locale](/es_ES/LC_MESSAGES/gnumed.mo)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
does not translate: [translate this or i18n will not work properly !] =>
[translate this or i18n will not work properly !]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
trying
[/var/lib/python-support/python2.5/Gnumed/locale](/es_ES/LC_MESSAGES/gnumed.mo)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
trying
[/var/lib/python-support/python2.5/Gnumed/wxpython/locale](/es_ES/LC_MESSAGES/gnumed.mo)
2008-06-23 23:07:08 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmI18N.py:address@hidden):
Giving up and falling back to NullTranslations() class in despair.
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gnumed.py:<module>@265):
Starting up as main module ($Revision: 1.123 $).
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gnumed.py:<module>@266):
command line is: {}
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gnumed.py:<module>@267):
Python 2.5.2 (r252:60911, Apr 21 2008, 11:12:42)
[GCC 4.2.3 (Ubuntu 4.2.3-2ubuntu7)] on linux2 (posix)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
wxPython not available
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
local application base dir: /var/lib/python-support/python2.5/Gnumed
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
current working dir: /home/pedro
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
user home dir: /home/pedro
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
user-specific config dir: /home/pedro/.gnumed
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
system-wide config dir: /etc/gnumed
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
system-wide application data dir: /usr/share/gnumed
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:<module>@59):
$Revision: 1.14 $
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
mx.DateTime.now(): [2008-06-23 23:07:08.71]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
datetime.now() : [2008-06-23 23:07:08.714271]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
time.localtime() : [(2008, 6, 23, 23, 7, 8, 0, 175, 0)]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
time.gmtime() : [(2008, 6, 24, 5, 7, 8, 1, 176, 0)]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
$TZ not defined
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
time.daylight: [0] (whether or not DST is locally used at all)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
time.timezone: [21600] seconds
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
time.altzone : [21600] seconds
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
time.tzname : [CST / CST] (non-DST / DST)
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
mx.DateTime.now().gmtoffset(): [-06:00:00,00]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
DST currently in effect: [False]
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
DST currently not in effect, using UTC offset of [-21600] seconds instead of
[-21600] seconds
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
UTC offset is negative, assuming WEST of Greenwich ("clock is behind")
2008-06-23 23:07:08 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmDateTime.py:address@hidden):
ISO timezone: [-06:00:00,00] (taken from mx.DateTime.now().gmtoffset())
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:07:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:<module>@30):
$Revision: 1.63.2.1 $
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:<module>@41):
psycopg2 version: 2.0.6 (dec mx dt ext pq3)
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:<module>@42):
PostgreSQL via DB-API module "<module 'psycopg2' from
'/usr/lib/python2.5/site-packages/psycopg2/__init__.pyc'>": API level 2.0,
thread safety 2, parameter style "pyformat"
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:<module>@69):
assuming default client encoding of [UTF8]
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:<module>@75):
assuming default client time zone of [-06:00:00.00]
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:<module>@77):
$Revision: 1.54.8.1 $
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=None>)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
No config file given on command line. Format: --conf-file=<config file>
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
$GNUMED_DIR not set
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: ['/home/pedro/.gnumed/gnumed.conf',
'/home/pedro/.gnumed.conf', '/etc/gnumed/gnumed.conf', '/etc/gnumed.conf',
'/var/lib/python-support/python2.5/Gnumed/wxpython/gnumed.conf',
'/var/lib/python-support/python2.5/Gnumed/wxpython/../etc/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/gnumed.conf] not found
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed.conf] not found
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
found config file [/etc/gnumed/gnumed.conf]
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
parsing config file [/etc/gnumed/gnumed.conf]
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmShellAPI.py:<module>@22):
$Revision: 1.2 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:<module>@20):
$Revision: 1.12 $
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:<module>@33):
$Revision: 1.76.2.1 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBusinessDBObject.py:<module>@143):
$Revision: 1.46 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmMimeLib.py:<module>@21):
$Revision: 1.14 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmMedDoc.py:<module>@21):
$Revision: 1.100 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmDemographicRecord.py:<module>@30):
$Revision: 1.93 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmAllergy.py:<module>@18):
$Revision: 1.28 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmClinNarrative.py:<module>@18):
$Revision: 1.27 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmEMRStructItems.py:<module>@19):
$Revision: 1.103 $
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/business/gmClinicalRecord.py:<module>@44):
$Revision: 1.252 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmPerson.py:<module>@26):
$Revision: 1.146.2.3 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:<module>@24):
$Revision: 1.75 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPatPicWidgets.py:<module>@30):
$Revision: 1.28 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmKVK.py:<module>@26):
$Revision: 1.16.2.1 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmDataMiningWidgets.py:<module>@29):
$Revision: 1.6 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:<module>@31):
$Revision: 1.2 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPatSearchWidgets.py:<module>@31):
$Revision: 1.97.2.1 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAllergyWidgets.py:<module>@24):
$Revision: 1.28 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmTopPanel.py:<module>@19):
$Revision: 1.89 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmHorstSpace.py:<module>@34):
$Revision: 1.40 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/exporters/gmPatientExporter.py:<module>@30):
$Revision: 1.109.2.1 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmEMRStructWidgets.py:<module>@37):
$Revision: 1.71 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmResizingWidgets.py:<module>@23):
$Revision: 1.48 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmSOAPWidgets.py:<module>@22):
$Revision: 1.95 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmNarrativeWidgets.py:<module>@24):
$Revision: 1.6 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmEMRBrowser.py:<module>@24):
$Revision: 1.81 $
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmStaffWidgets.py:<module>@23):
$Revision: 1.17.2.1 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmMedDocWidgets.py:<module>@24):
$Revision: 1.150.2.1 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmForms.py:<module>@25):
$Revision: 1.55.2.1 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmFormWidgets.py:<module>@24):
$Revision: 1.7 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmProviderInboxWidgets.py:<module>@24):
$Revision: 1.19 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py:<module>@68):
$Revision: 1.375.2.6 $
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py:<module>@69):
wxPython GUI framework: 2.6.3.2 ('__WXGTK__', 'wxGTK', 'unicode', 'gtk2',
'wx-assertions-off', 'SWIG-1.3.27')
2008-06-23 23:07:09 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
option <client timezone> not found in group [backend]
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py:<module>@80):
GNUmed client version [v0.2.8.2]
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py:<module>@81):
expected database version [v8]
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/home/pedro/gnumed.conf>)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
No config file given on command line. Format: --conf-file=<config file>
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: ['/home/pedro/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/var/lib/python-support/python2.5/Gnumed/gnumed.conf>)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
No config file given on command line. Format: --conf-file=<config file>
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order:
['/var/lib/python-support/python2.5/Gnumed/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/var/lib/python-support/python2.5/Gnumed/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/home/pedro/.gnumed/gnumed.conf>)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
No config file given on command line. Format: --conf-file=<config file>
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: ['/home/pedro/.gnumed/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/etc/gnumed/gnumed-client.conf>)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
No config file given on command line. Format: --conf-file=<config file>
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: ['/etc/gnumed/gnumed-client.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/gnumed/gnumed-client.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
local application base dir: /var/lib/python-support/python2.5/Gnumed
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
current working dir: /home/pedro
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
user home dir: /home/pedro
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
user-specific config dir: /home/pedro/.gnumed
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
system-wide config dir: /etc
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
system-wide application data dir: /usr/share/gnumed
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py:address@hidden):
running on GTK (probably Linux)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/home/pedro/gnumed.conf>)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
No config file given on command line. Format: --conf-file=<config file>
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: ['/home/pedro/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/var/lib/python-support/python2.5/Gnumed/gnumed.conf>)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
No config file given on command line. Format: --conf-file=<config file>
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order:
['/var/lib/python-support/python2.5/Gnumed/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/var/lib/python-support/python2.5/Gnumed/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/home/pedro/.gnumed/gnumed.conf>)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
No config file given on command line. Format: --conf-file=<config file>
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: [u'/home/pedro/.gnumed/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/etc/gnumed-client.conf>)
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
No config file given on command line. Format: --conf-file=<config file>
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: [u'/etc/gnumed-client.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/gnumed-client.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/etc/gnumed-client.conf>)
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: [u'/etc/gnumed-client.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/gnumed-client.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/home/pedro/.gnumed/gnumed.conf>)
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: [u'/home/pedro/.gnumed/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/home/pedro/gnumed.conf>)
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: ['/home/pedro/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/home/pedro/.gnumed/gnumed.conf>)
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: [u'/home/pedro/.gnumed/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=/home/pedro/gnumed.conf>)
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: ['/home/pedro/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/gnumed.conf] not found
2008-06-23 23:07:09 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
(<aDir=None>, <aName=None>)
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
$GNUMED_DIR not set
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file search order: ['/home/pedro/.gnumed/gnumed.conf',
'/home/pedro/.gnumed.conf', '/etc/gnumed/gnumed.conf', '/etc/gnumed.conf',
'/var/lib/python-support/python2.5/Gnumed/wxpython/gnumed.conf',
'/var/lib/python-support/python2.5/Gnumed/wxpython/../etc/gnumed.conf']
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/gnumed.conf] not found
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed.conf] not found
2008-06-23 23:07:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
found config file [/etc/gnumed/gnumed.conf]
2008-06-23 23:07:09 [DATA]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
parsing config file [/etc/gnumed/gnumed.conf]
2008-06-23 23:07:09 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
group [preferences] not found
2008-06-23 23:07:09 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
group [preferences] not found
2008-06-23 23:07:29 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
debug mode disabled
2008-06-23 23:07:29 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmLog.py:address@hidden):
SECURITY: log level change from [DATA] to [INFO]
2008-06-23 23:07:29 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
slave mode disabled
2008-06-23 23:07:37 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
login attempt 1/3 failed
2008-06-23 23:07:37 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
exception type : <class 'Gnumed.pycommon.gmPG2.cAuthenticationError'>
2008-06-23 23:07:37 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
exception value: PostgreSQL: fe_sendauth: no password supplied
DSN: dbname=gnumed_v8 host=salaam.homeunix.com port=5432 user=any-doc
sslmode=prefer
2008-06-23 23:07:37 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Unable to connect to database: PostgreSQL: fe_sendauth: no password supplied
DSN: dbname=gnumed_v8 host=salaam.homeunix.com port=5432 user=any-doc
sslmode=prefer Please retry or cancel !
2008-06-23 23:07:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
login attempt 1/3 failed, may retry
2008-06-23 23:07:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
exception type : <class 'Gnumed.pycommon.gmPG2.cAuthenticationError'>
2008-06-23 23:07:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
exception value: PostgreSQL: fe_sendauth: no password supplied
DSN: dbname=gnumed_v8 host=salaam.homeunix.com port=5432 user=any-doc
sslmode=prefer
2008-06-23 23:16:55 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
debug mode disabled
2008-06-23 23:16:55 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmLog.py:address@hidden):
SECURITY: log level change from [INFO] to [INFO]
2008-06-23 23:16:55 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
slave mode disabled
2008-06-23 23:16:56 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
login attempt 2/3 failed
2008-06-23 23:16:56 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
exception type : <class 'Gnumed.pycommon.gmPG2.cAuthenticationError'>
2008-06-23 23:16:56 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
exception value: PostgreSQL: FATAL: password authentication failed for user
"any-doc"
DSN: dbname=gnumed_v8 host=salaam.homeunix.com port=5432 user=any-doc
password=any-deoc sslmode=prefer
2008-06-23 23:16:56 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Unable to connect to database: PostgreSQL: FATAL: password authentication
failed for user "any-doc" DSN: dbname=gnumed_v8 host=salaam.homeunix.com
port=5432 user=any-doc password=any-deoc sslmode=prefer Please retry or cancel
!
2008-06-23 23:16:59 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
login attempt 2/3 failed, may retry
2008-06-23 23:16:59 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
exception type : <class 'Gnumed.pycommon.gmPG2.cAuthenticationError'>
2008-06-23 23:16:59 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
exception value: PostgreSQL: FATAL: password authentication failed for user
"any-doc"
DSN: dbname=gnumed_v8 host=salaam.homeunix.com port=5432 user=any-doc
password=any-deoc sslmode=prefer
2008-06-23 23:17:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
debug mode disabled
2008-06-23 23:17:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmLog.py:address@hidden):
SECURITY: log level change from [INFO] to [INFO]
2008-06-23 23:17:09 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
slave mode disabled
2008-06-23 23:17:11 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:address@hidden):
PostgreSQL version (numeric): 8.1
2008-06-23 23:17:12 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:address@hidden):
setting default login from [<Gnumed.pycommon.gmLoginInfo.LoginInfo instance at
0x936a14c>] to [<Gnumed.pycommon.gmLoginInfo.LoginInfo instance at 0x936a14c>]
2008-06-23 23:17:12 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:address@hidden):
setting default DSN from [dbname=gnumed_v8 host=salaam.homeunix.com port=5432
user=any-doc password=any-doc sslmode=prefer] to [dbname=gnumed_v8
host=salaam.homeunix.com port=5432 user=any-doc password=any-doc sslmode=prefer]
2008-06-23 23:17:12 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:address@hidden):
setting default client encoding from [UTF8] to [UTF8]
2008-06-23 23:17:15 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:address@hidden):
PostgreSQL version (string): "PostgreSQL 8.1.11 on i486-pc-linux-gnu, compiled
by GCC cc (GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)"
2008-06-23 23:17:16 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:address@hidden):
detected schema version [v8], hash [89b13a7af83337c3aad153b717e52360]
2008-06-23 23:17:16 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:17:16 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
$GNUMED_DIR not set
2008-06-23 23:17:16 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/gnumed.conf] not found
2008-06-23 23:17:16 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed.conf] not found
2008-06-23 23:17:16 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
found config file [/etc/gnumed/gnumed.conf]
2008-06-23 23:17:16 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
Problem backing up config file !
2008-06-23 23:17:16 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
exception type : <type 'exceptions.IOError'>
2008-06-23 23:17:16 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
exception value: [Errno 13] Permiso denegado:
'/etc/gnumed/gnumed.conf.gmCfg.bak'
2008-06-23 23:17:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
Cannot open /etc/gnumed/gnumed.conf.gmCfg.new for writing.
2008-06-23 23:17:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
exception type : <type 'exceptions.IOError'>
2008-06-23 23:17:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
exception value: [Errno 13] Permiso denegado:
'/etc/gnumed/gnumed.conf.gmCfg.new'
2008-06-23 23:17:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:17:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py", line 583, in
store<#10-0x0A-lf> new_file = open(new_name, "wb")<#10-0x0A-lf>
2008-06-23 23:17:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
IOError: [Errno 13] Permiso denegado:
'/etc/gnumed/gnumed.conf.gmCfg.new'<#10-0x0A-lf>
2008-06-23 23:17:16 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:address@hidden):
checking database settings
2008-06-23 23:17:17 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
starting backend notifications listener thread
2008-06-23 23:17:17 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
configured patient specific notifications:
2008-06-23 23:17:17 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
[u'allg_mod_db', u'allg_state_mod_db', u'doc_mod_db', u'doc_page_mod_db',
u'identity_mod_db', u'name_mod_db', u'vacc_mod_db']
2008-06-23 23:17:17 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
configured unspecific notifications:
2008-06-23 23:17:17 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
[u'provider_inbox_mod_db']
2008-06-23 23:17:17 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
listener process PID: [4984]
2008-06-23 23:17:17 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
starting to listen for [provider_inbox_mod_db:]
2008-06-23 23:17:17 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
starting listener thread
2008-06-23 23:17:20 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:17:20 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmProviderInboxPlugin
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmProviderInboxPlugin] name: [Inbox]
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmNotebookedPatientEditionPlugin.py:<module>@30):
$Revision: 1.8 $
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmNotebookedPatientEditionPlugin
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmNotebookedPatientEditionPlugin] name: [Patient Details]
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmEMRBrowserPlugin.py:<module>@17):
$Revision: 1.14 $
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmEMRBrowserPlugin
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmEMRBrowserPlugin] name: [EMR tree]
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmNotebookedProgressNoteInputPlugin.py:<module>@28):
$Revision: 1.12 $
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmNotebookedProgressNoteInputPlugin
2008-06-23 23:17:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmNotebookedProgressNoteInputPlugin] name: [Progress notes]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmEMRJournalPlugin.py:<module>@15):
$Revision: 1.10 $
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmEMRJournalPlugin
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmEMRJournalPlugin] name: [EMR journal]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmShowMedDocs.py:<module>@24):
$Revision: 1.71 $
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmShowMedDocs
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmShowMedDocs] name: [Documents]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmScanIdxMedDocsPlugin
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmScanIdxMedDocsPlugin] name: [Import Documents]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmScanBackend.py:<module>@26):
$Revision: 1.49 $
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmKOrganizerPlugin
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmKOrganizerPlugin] name: [Appointments]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmDataMiningPlugin
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmDataMiningPlugin] name: [Reports]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmXdtObjects.py:<module>@24):
$Revision: 1.29 $
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmXdtViewer.py:<module>@28):
$Revision: 1.29 $
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmXdtViewer
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmXdtViewer] name: [xDT Viewer]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmManual.py:<module>@28):
$Revision: 1.43 $
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmManual
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmManual] name: [Manual]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmManual.py:address@hidden):
found Manual path [/usr/share/doc/gnumed/user-manual/]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmConfigRegistry.py:<module>@27):
$Revision: 1.42 $
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
gmConfigRegistry
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py:address@hidden):
set: [gui] class: [gmConfigRegistry] name: [Setup]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gui/gmConfigRegistry.py:address@hidden):
ConfigReg: address@hidden Default
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
$GNUMED_DIR not set
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/gnumed.conf] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed.conf] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
found config file [/etc/gnumed/gnumed.conf]
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
$GNUMED_DIR not set
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/config-definitions/gnumed.conf.definitions]
not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.config-definitions/gnumed.conf.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/gnumed/config-definitions/gnumed.conf.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/config-definitions/gnumed.conf.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/config-definitions/gnumed.conf.definitions]
not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/../etc/config-definitions/gnumed.conf.definitions]
not found
2008-06-23 23:17:49 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
Unhandled exception while opening config file
[config-definitions/gnumed.conf.definitions]
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception type : <type 'exceptions.IOError'>
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception value: cannot find config file
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
No definition source found for gnumed.conf
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
$GNUMED_DIR not set
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/config-definitions/DBDefault.definitions] not
found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/gnumed/config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/config-definitions/DBDefault.definitions]
not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/../etc/config-definitions/DBDefault.definitions]
not found
2008-06-23 23:17:49 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
Unhandled exception while opening config file
[config-definitions/DBDefault.definitions]
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception type : <type 'exceptions.IOError'>
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception value: cannot find config file
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
No definition source found for DB:CURRENT_USER_CURRENT_WORKPLACE
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
$GNUMED_DIR not set
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/config-definitions/DBDefault.definitions] not
found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/gnumed/config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/config-definitions/DBDefault.definitions]
not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/../etc/config-definitions/DBDefault.definitions]
not found
2008-06-23 23:17:49 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
Unhandled exception while opening config file
[config-definitions/DBDefault.definitions]
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception type : <type 'exceptions.IOError'>
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception value: cannot find config file
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
No definition source found for DB:CURRENT_USER_DEFAULT_WORKPLACE
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
$GNUMED_DIR not set
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/config-definitions/DBDefault.definitions] not
found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/gnumed/config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/config-definitions/DBDefault.definitions]
not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/../etc/config-definitions/DBDefault.definitions]
not found
2008-06-23 23:17:49 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
Unhandled exception while opening config file
[config-definitions/DBDefault.definitions]
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception type : <type 'exceptions.IOError'>
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception value: cannot find config file
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
No definition source found for DB:DEFAULT_USER_CURRENT_WORKPLACE
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
ignoring command line per cfg_IGNORE_CMD_LINE
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
$GNUMED_DIR not set
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.gnumed/config-definitions/DBDefault.definitions] not
found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/home/pedro/.config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/gnumed/config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file [/etc/config-definitions/DBDefault.definitions] not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/config-definitions/DBDefault.definitions]
not found
2008-06-23 23:17:49 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
config file
[/var/lib/python-support/python2.5/Gnumed/wxpython/../etc/config-definitions/DBDefault.definitions]
not found
2008-06-23 23:17:49 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmCfg.py:address@hidden):
cannot find config file in any of the standard paths
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
Unhandled exception while opening config file
[config-definitions/DBDefault.definitions]
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception type : <type 'exceptions.IOError'>
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
exception value: cannot find config file
2008-06-23 23:17:49 [WARN]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmConfigCommon.py:address@hidden):
No definition source found for DB:DEFAULT_USER_DEFAULT_WORKPLACE
2008-06-23 23:17:52 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py:address@hidden):
display: 1440:900
2008-06-23 23:17:52 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:17:52 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:17:53 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:17:53 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:17:53 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:17:53 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:18:25 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmPatSearchWidgets.py:address@hidden):
0 person objects(s) fetched in 0.581 seconds
2008-06-23 23:18:25 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:18:25 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:20:20 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
To properly create an address, all the related fields must be filled in.
2008-06-23 23:20:26 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
To properly create an address, all the related fields must be filled in.
2008-06-23 23:20:26 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:20:26 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:21:41 [INFO]
(/var/lib/python-support/python2.5/Gnumed/business/gmMedDoc.py:address@hidden):
no mugshots available for patient [142]
2008-06-23 23:21:47 [INFO]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmHorstSpace.py:address@hidden):
cannot check whether notebook page change needs to be vetoed
2008-06-23 23:22:00 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:22:00 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:22:00 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:22:00 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:22:54 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:22:54 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:27:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:27:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:41:00 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:41:00 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:41:12 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:address@hidden):
query failed: [select * from clin.v_pat_episodes where pk_patient=142 and
description='Piedra' and pk_health_issue is NULL]
2008-06-23 23:41:12 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py:address@hidden):
PG status message: None
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'psycopg2.OperationalError'>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: server closed the connection unexpectedly
This probably means the server terminated abnormally
before or while processing the request.
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmSOAPWidgets.py",
line 455, in __on_save<#10-0x0A-lf> if not soap_nb_page.save():<#10-0x0A-lf>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmSOAPWidgets.py",
line 819, in save<#10-0x0A-lf> return self.__soap_editor.save()<#10-0x0A-lf>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmSOAPWidgets.py",
line 649, in save<#10-0x0A-lf> new_episode = emr.add_episode(episode_name =
epi_name[:45], pk_health_issue = None, is_open = True)<#10-0x0A-lf>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/business/gmClinicalRecord.py", line
724, in add_episode<#10-0x0A-lf> is_open = is_open<#10-0x0A-lf>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/business/gmEMRStructItems.py", line
469, in create_episode<#10-0x0A-lf> episode =
cEpisode(id_patient=patient_id, name=episode_name,
health_issue=pk_health_issue)<#10-0x0A-lf>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/business/gmEMRStructItems.py", line
171, in __init__<#10-0x0A-lf> get_col_idx=True<#10-0x0A-lf>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py", line
637, in run_ro_queries<#10-0x0A-lf> curs.execute(query['cmd'],
args)<#10-0x0A-lf>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/usr/lib/python2.5/site-packages/psycopg2/extras.py", line 85, in
execute<#10-0x0A-lf> return _cursor.execute(self, query, vars,
async)<#10-0x0A-lf>
2008-06-23 23:41:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
OperationalError: server closed the connection
unexpectedly<#10-0x0A-lf><#9-0x09-ht>This probably means the server terminated
abnormally<#10-0x0A-lf><#9-0x09-ht>before or while processing the
request.<#10-0x0A-lf><#10-0x0A-lf>
2008-06-23 23:41:12 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-41-12.log]
2008-06-23 23:41:20 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'psycopg2.InterfaceError'>
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: cursor already closed
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmHorstSpace.py",
line 232, in _on_notebook_page_changed<#10-0x0A-lf>
new_page.receive_focus()<#10-0x0A-lf>
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmPlugin.py", line
180, in receive_focus<#10-0x0A-lf> self._widget.repopulate_ui()<#10-0x0A-lf>
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmEMRBrowser.py",
line 504, in repopulate_ui<#10-0x0A-lf> exporter.export(txt)<#10-0x0A-lf>
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/exporters/gmPatientExporter.py", line
1023, in export<#10-0x0A-lf> rows, idx = gmPG2.run_ro_queries(queries =
[{'cmd': cmd, 'args': [patient['pk_identity']]}], get_col_idx =
True)<#10-0x0A-lf>
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py", line
643, in run_ro_queries<#10-0x0A-lf> curs_close()<#10-0x0A-lf>
2008-06-23 23:41:23 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
InterfaceError: cursor already closed<#10-0x0A-lf>
2008-06-23 23:41:23 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-41-23.log]
2008-06-23 23:41:26 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:41:26 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:41:31 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
listener thread still alive after join()
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'psycopg2.OperationalError'>
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: connection not open
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
97, in stop_thread<#10-0x0A-lf>
self.__unregister_patient_notifications()<#10-0x0A-lf>
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
179, in __unregister_patient_notifications<#10-0x0A-lf>
self._cursor.execute(cmd)<#10-0x0A-lf>
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/usr/lib/python2.5/site-packages/psycopg2/extras.py", line 85, in
execute<#10-0x0A-lf> return _cursor.execute(self, query, vars,
async)<#10-0x0A-lf>
2008-06-23 23:41:31 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
OperationalError: connection not open<#10-0x0A-lf><#10-0x0A-lf>
2008-06-23 23:41:31 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-41-31.log]
2008-06-23 23:41:37 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'psycopg2.InterfaceError'>
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: connection already closed
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmTopPanel.py",
line 268, in _on_allergies_dclicked<#10-0x0A-lf> dlg =
gmAllergyWidgets.cAllergyManagerDlg(parent=self, id=-1)<#10-0x0A-lf>
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/wxpython/gmAllergyWidgets.py", line
217, in __init__<#10-0x0A-lf> self.__refresh_ui()<#10-0x0A-lf>
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/wxpython/gmAllergyWidgets.py", line
233, in __refresh_ui<#10-0x0A-lf> allergies =
emr.get_allergies()<#10-0x0A-lf>
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/business/gmClinicalRecord.py", line
585, in get_allergies<#10-0x0A-lf> rows, idx = gmPG2.run_ro_queries(queries
= [{'cmd': cmd, 'args': [self.pk_patient]}], get_col_idx=True)<#10-0x0A-lf>
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/gmPG2.py", line
618, in run_ro_queries<#10-0x0A-lf> curs = conn.cursor()<#10-0x0A-lf>
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/usr/lib/python2.5/site-packages/psycopg2/extras.py", line 73, in
cursor<#10-0x0A-lf> return _connection.cursor(self,
cursor_factory=DictCursor)<#10-0x0A-lf>
2008-06-23 23:41:59 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
InterfaceError: connection already closed<#10-0x0A-lf>
2008-06-23 23:41:59 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-41-59.log]
2008-06-23 23:42:02 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment: d
2008-06-23 23:42:02 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:02 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-02.log]
2008-06-23 23:42:05 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:05 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:05 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-05.log]
2008-06-23 23:42:05 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:05 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:05 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:05 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-05.log]
2008-06-23 23:42:06 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:06 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:06 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-06.log]
2008-06-23 23:42:06 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:06 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:06 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:06 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-06.log]
2008-06-23 23:42:08 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:08 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:08 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:08 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:08 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:08 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:08 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:08 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:08 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:08 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:08 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-08.log]
2008-06-23 23:42:12 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:12 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:12 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:12 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-12.log]
2008-06-23 23:42:14 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:14 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:14 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:14 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:14 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:14 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:14 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:14 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:14 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:14 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:14 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-14.log]
2008-06-23 23:42:15 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:15 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:15 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:15 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:15 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:15 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:15 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:15 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:15 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:15 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:15 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-15.log]
2008-06-23 23:42:16 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:16 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:16 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:16 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-16.log]
2008-06-23 23:42:18 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:18 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:18 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:18 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:18 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:18 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:18 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:18 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:18 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:18 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:18 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-18.log]
2008-06-23 23:42:20 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:27 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:27 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:27 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:27 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:27 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:27 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:27 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:27 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:27 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:27 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-27.log]
2008-06-23 23:42:30 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:30 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:30 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:30 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:30 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:30 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:30 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:30 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:30 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:30 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:30 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-30.log]
2008-06-23 23:42:32 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:40 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:40 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:40 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:40 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:41 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:41 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:41 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:41 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:41 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:41 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-41.log]
2008-06-23 23:42:44 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:48 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:48 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:48 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:48 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:48 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:48 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:48 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:48 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:48 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:48 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-48.log]
2008-06-23 23:42:51 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:42:51 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:42:51 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:42:51 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:42:51 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:42:51 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:42:51 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:42:51 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:42:51 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:42:51 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:42:51 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:42:51 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:42:51 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-42-51.log]
2008-06-23 23:43:00 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:43:00 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:43:00 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:43:00 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:43:00 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:43:00 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:43:00 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:43:00 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:43:00 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:43:00 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:43:00 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-43-00.log]
2008-06-23 23:43:00 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/pedro/.gnumed/scripts]
2008-06-23 23:43:00 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from
'/home/pedro/.gnumed/scripts/hook_script.py'>]
2008-06-23 23:43:02 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:43:02 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:43:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:43:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:43:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:43:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:43:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:43:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:43:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:43:02 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:43:02 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-43-02.log]
2008-06-23 23:43:07 [ERROR]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-06-23 23:43:11 [INFO]
(/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py:address@hidden):
stopping backend notifications listener thread
2008-06-23 23:43:11 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-06-23 23:43:11 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-06-23 23:43:11 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-06-23 23:43:11 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-06-23 23:43:11 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1321, in OnClose<#10-0x0A-lf> self._clean_exit()<#10-0x0A-lf>
2008-06-23 23:43:11 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiMain.py", line
1606, in _clean_exit<#10-0x0A-lf> listener.stop_thread()<#10-0x0A-lf>
2008-06-23 23:43:11 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File
"/var/lib/python-support/python2.5/Gnumed/pycommon/gmBackendListener.py", line
87, in stop_thread<#10-0x0A-lf> self._quit_lock.release()<#10-0x0A-lf>
2008-06-23 23:43:11 [PANIC]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-06-23 23:43:11 [WARN]
(/var/lib/python-support/python2.5/Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to
[/home/pedro/gnumed/logs/gnumed_2008-06-23_23-43-11.log]
- [Gnumed-devel] <bug>: close application,
gnumed <=