[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r2398 - in gnunet-gtk: . libltdl po src/plugins/fs
|
From: |
grothoff |
|
Subject: |
[GNUnet-SVN] r2398 - in gnunet-gtk: . libltdl po src/plugins/fs |
|
Date: |
Fri, 23 Dec 2005 15:34:36 -0800 (PST) |
Author: grothoff
Date: 2005-12-23 15:34:27 -0800 (Fri, 23 Dec 2005)
New Revision: 2398
Modified:
gnunet-gtk/libltdl/aclocal.m4
gnunet-gtk/libltdl/config.guess
gnunet-gtk/libltdl/config.sub
gnunet-gtk/libltdl/configure
gnunet-gtk/libltdl/ltmain.sh
gnunet-gtk/ltmain.sh
gnunet-gtk/po/Makefile.in
gnunet-gtk/src/plugins/fs/namespace.c
gnunet-gtk/src/plugins/fs/search.c
Log:
version bump and some warnings'
'
Modified: gnunet-gtk/libltdl/aclocal.m4
===================================================================
--- gnunet-gtk/libltdl/aclocal.m4 2005-12-23 23:20:32 UTC (rev 2397)
+++ gnunet-gtk/libltdl/aclocal.m4 2005-12-23 23:34:27 UTC (rev 2398)
@@ -13,8 +13,7 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-# serial 47 AC_PROG_LIBTOOL
-# Debian $Rev: 214 $
+# serial 47 Debian 1.5.20-2 AC_PROG_LIBTOOL
# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -124,7 +123,7 @@
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
+Xsed='sed -e 1s/^X//'
[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
# Same as above, but do not quote variable references.
@@ -144,7 +143,7 @@
default_ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
@@ -192,6 +191,8 @@
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
+_LT_CC_BASENAME([$compiler])
+
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
@@ -237,6 +238,48 @@
])# _LT_AC_SYS_COMPILER
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+AC_DEFUN([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+AC_DEFUN([_LT_COMPILER_BOILERPLATE],
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+AC_DEFUN([_LT_LINKER_BOILERPLATE],
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_LINKER_BOILERPLATE
+
+
# _LT_AC_SYS_LIBPATH_AIX
# ----------------------
# Links a minimal program and checks the executable
@@ -309,15 +352,15 @@
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q
"[$]0"' 'echo test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
- echo_test_string="`eval $cmd`" &&
+ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+ echo_test_string=`eval $cmd` &&
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
@@ -486,7 +529,7 @@
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
+ case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
x86_64-*linux*)
@@ -568,7 +611,7 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@@ -578,8 +621,10 @@
echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test ! -s conftest.err; then
+ # So say no if there are warnings other than the usual output.
+ $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null;
then
$2=yes
fi
fi
@@ -605,11 +650,16 @@
LDFLAGS="$LDFLAGS $3"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The compiler can only warn and ignore the option if not recognized
+ # The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
else
$2=yes
fi
@@ -668,11 +718,38 @@
lt_cv_sys_max_cmd_len=8192;
;;
- *)
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ *)
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring"
2>/dev/null` \
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
new_result=`expr "X$teststring" : ".*" 2>&1` &&
lt_cv_sys_max_cmd_len=$new_result &&
@@ -777,7 +854,7 @@
}]
EOF
if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) $1 ;;
@@ -926,7 +1003,7 @@
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
@@ -938,11 +1015,13 @@
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- if test ! -s out/conftest.err; then
+ $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp
+ $SED '/^$/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2
>/dev/null; then
_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
fi
fi
- chmod u+w .
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
$rm conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
@@ -1006,8 +1085,8 @@
[AC_MSG_CHECKING([how to hardcode library paths into programs])
_LT_AC_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
+ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
# We can hardcode non-existant directories.
if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
@@ -1174,7 +1253,7 @@
shlibpath_var=LIBRARY_PATH
;;
-bsdi4*)
+bsdi[[45]]*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -1202,7 +1281,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo
\$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname'
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
@@ -1232,7 +1312,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
;;
esac
;;
@@ -1255,7 +1335,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n"
"$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep
"^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR,
,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -1290,8 +1370,17 @@
dynamic_linker='GNU ld.so'
;;
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[123]]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
@@ -1309,7 +1398,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
- freebsd3.[01]* | freebsdelf3.[01]*)
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -1336,7 +1425,7 @@
version_type=sunos
need_lib_prefix=no
need_version=no
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
@@ -1435,7 +1524,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g'
/etc/ld.so.conf | tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2));
skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e
's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -1510,7 +1599,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
- need_version=yes
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
@@ -1676,7 +1769,9 @@
case $tagname in
CXX)
- if test -n "$CXX" && test "X$CXX" != "Xno"; then
+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
AC_LIBTOOL_LANG_CXX_CONFIG
else
tagname=""
@@ -1738,7 +1833,7 @@
# AC_LIBTOOL_WIN32_DLL
# --------------------
-# declare package support for building win32 dll's
+# declare package support for building win32 DLLs
AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
])# AC_LIBTOOL_WIN32_DLL
@@ -1912,7 +2007,7 @@
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic
\(.*\)\"`"
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
@@ -2022,7 +2117,7 @@
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
+ # but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
@@ -2054,7 +2149,7 @@
AC_DEFUN([AC_PROG_LD_GNU],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
@@ -2081,6 +2176,15 @@
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
])# AC_PROG_LD_RELOAD_FLAG
@@ -2114,7 +2218,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-bsdi4*)
+bsdi[[45]]*)
lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB
(shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
@@ -2137,13 +2241,13 @@
lt_cv_deplibs_check_method=pass_all
;;
-freebsd* | kfreebsd*-gnu)
+freebsd* | kfreebsd*-gnu | dragonfly*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86
(compact )?demand paged shared library'
+ lt_cv_deplibs_check_method='file_magic
(FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
@@ -2159,7 +2263,7 @@
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
lt_cv_deplibs_check_method='file_magic
(s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
@@ -2209,12 +2313,10 @@
;;
openbsd*)
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB
shared object'
+ lt_cv_deplibs_check_method='match_pattern
/lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+ lt_cv_deplibs_check_method='match_pattern
/lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
fi
;;
@@ -2335,13 +2437,13 @@
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl convenience library and
# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
-# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will
-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
+# --enable-ltdl-convenience to the configure arguments. Note that
+# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
+# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
+# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
+# (note the single quotes!). If your package is not flat and you're not
+# using automake, define top_builddir and top_srcdir appropriately in
+# the Makefiles.
AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case $enable_ltdl_convenience in
@@ -2360,13 +2462,13 @@
# -----------------------------------
# sets LIBLTDL to the link flags for the libltdl installable library and
# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments. Note that LIBLTDL
-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If
-# DIRECTORY is not provided and an installed libltdl is not found, it is
-# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/'
-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
-# quotes!). If your package is not flat and you're not using automake,
-# define top_builddir and top_srcdir appropriately in the Makefiles.
+# --enable-ltdl-install to the configure arguments. Note that
+# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
+# and an installed libltdl is not found, it is assumed to be `libltdl'.
+# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and top_srcdir
+# appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
@@ -2404,10 +2506,21 @@
# ---------------
AC_DEFUN([_LT_AC_LANG_CXX],
[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
])# _LT_AC_LANG_CXX
+# _LT_AC_PROG_CXXCPP
+# ---------------
+AC_DEFUN([_LT_AC_PROG_CXXCPP],
+[
+AC_REQUIRE([AC_PROG_CXX])
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+fi
+])# _LT_AC_PROG_CXXCPP
# AC_LIBTOOL_F77
# --------------
@@ -2480,6 +2593,10 @@
_LT_AC_SYS_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
#
# Check for any special shared library compilation flags.
#
@@ -2530,7 +2647,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
-case "$host_os" in
+case $host_os in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
@@ -2543,43 +2660,6 @@
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
- ;;
- darwin* | rhapsody*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- case "$host_os" in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined
suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace
-undefined suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o
$lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle
$libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,,"
-e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag
-o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname
$verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,,"
-e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
;;
esac
AC_MSG_RESULT([$enable_shared])
@@ -2605,7 +2685,7 @@
AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
[AC_LANG_PUSH(C++)
AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_AC_TAGVAR(allow_undefined_flag, $1)=
@@ -2634,7 +2714,7 @@
_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
# Source file extension for C++ test sources.
-ac_ext=cc
+ac_ext=cpp
# Object file extension for compiled C++ test sources.
objext=o
@@ -2649,6 +2729,10 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_LD=$LD
@@ -2670,7 +2754,7 @@
CC=${CXX-"c++"}
compiler=$CC
_LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+_LT_CC_BASENAME([$compiler])
# We don't want -fno-exception wen compiling C++ code, so set the
# no_builtin_flag separately
@@ -2777,7 +2861,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
if test "$GXX" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
@@ -2798,6 +2882,9 @@
fi
esac
shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
else
# not using gcc
if test "$host_cpu" = ia64; then
@@ -2843,7 +2930,7 @@
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds it's shared libraries.
+ # This is similar to how AIX traditionally builds its shared libraries.
_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags
${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@@ -2857,6 +2944,7 @@
esac
;;
+
cygwin* | mingw* | pw32*)
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
@@ -2880,65 +2968,76 @@
_LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
;;
+ darwin* | rhapsody*)
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined
${wl}suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace
${wl}-undefined ${wl}suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace
${wl}-undefined ${wl}suppress'
+ ;;
+ 10.*)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined
${wl}dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_AC_TAGVAR(hardcode_direct, $1)=no
+ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- darwin* | rhapsody*)
- if test "$GXX" = yes; then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- case "$host_os" in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined
suppress'
+ if test "$GXX" = yes ; then
+ lt_int_apple_cc_single_mod=no
+ output_verbose_link_cmd='echo'
+ if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+ lt_int_apple_cc_single_mod=yes
+ fi
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring'
else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace
-undefined suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
- ;;
- esac
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs
-nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o
$lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname
$verstring'
+ fi
+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it
doesn't exist in older darwin lds
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
+ else
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib
-o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib
${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname
$verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+ case $cc_basename in
+ xlc*)
+ output_verbose_link_cmd='echo'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags
${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it
doesn't exist in older darwin lds
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags
${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+ *)
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
fi
- ;;
- esac
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring'
- fi
- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load
$allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+ ;;
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
- else
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,,"
-e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
dgux*)
case $cc_basename in
- ec++)
+ ec++*)
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
- ghcx)
+ ghcx*)
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -2949,14 +3048,14 @@
;;
esac
;;
- freebsd[12]*)
+ freebsd[[12]]*)
# C++ shared libraries reported to be fairly broken before switch to ELF
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
freebsd-elf*)
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
;;
- freebsd* | kfreebsd*-gnu)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
_LT_AC_TAGVAR(ld_shlibs, $1)=yes
@@ -2973,11 +3072,11 @@
# location of the library.
case $cc_basename in
- CC)
+ CC*)
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
- aCC)
+ aCC*)
_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b
${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib ||
mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
@@ -2987,7 +3086,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext
2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext
2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
;;
*)
if test "$GXX" = yes; then
@@ -3001,7 +3100,7 @@
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
@@ -3017,7 +3116,7 @@
;;
esac
fi
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*)
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -3038,12 +3137,12 @@
esac
case $cc_basename in
- CC)
+ CC*)
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
- aCC)
- case "$host_cpu" in
+ aCC*)
+ case $host_cpu in
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib
$linker_flags $libobjs $deplibs'
;;
@@ -3064,7 +3163,7 @@
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
- case "$host_cpu" in
+ case $host_cpu in
ia64*|hppa*64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib
$linker_flags $libobjs $deplibs'
;;
@@ -3082,9 +3181,9 @@
;;
irix5* | irix6*)
case $cc_basename in
- CC)
+ CC*)
# SGI C++
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname
$soname `test -n "$verstring" && echo -set_version $verstring` -update_registry
${objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname
$soname `test -n "$verstring" && echo -set_version $verstring` -update_registry
${output_objdir}/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -3095,7 +3194,7 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring`
${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring`
${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring`
-o $lib'
fi
@@ -3108,7 +3207,7 @@
;;
linux*)
case $cc_basename in
- KCC)
+ KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
@@ -3133,17 +3232,41 @@
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
- icpc)
+ icpc*)
# Intel C++
with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname
${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs
$deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"'
$libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname
${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname
${wl}-retain-symbols-file $wl$export_symbols -o $lib'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
_LT_AC_TAGVAR(whole_archive_flag_spec,
$1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
;;
- cxx)
+ pgCC*)
+ # Portland Group C++ compiler
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o
$lib'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for
conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ ;;
+ cxx*)
# Compaq C++
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o
$lib ${wl}-retain-symbols-file $wl$export_symbols'
@@ -3174,7 +3297,7 @@
;;
mvs*)
case $cc_basename in
- cxx)
+ cxx*)
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
@@ -3195,9 +3318,25 @@
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 |
grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ openbsd*)
+ _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags
${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_AC_TAGVAR(whole_archive_flag_spec,
$1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd='echo'
+ ;;
osf3*)
case $cc_basename in
- KCC)
+ KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
@@ -3213,14 +3352,14 @@
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
;;
- RCC)
+ RCC*)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
- cxx)
+ cxx*)
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
$soname `test -n "$verstring" && echo ${wl}-set_version $verstring`
-update_registry ${objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
$soname `test -n "$verstring" && echo ${wl}-set_version $verstring`
-update_registry ${output_objdir}/so_locations -o $lib'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -3238,7 +3377,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo
${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath
${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -3257,7 +3396,7 @@
;;
osf4* | osf5*)
case $cc_basename in
- KCC)
+ KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
@@ -3272,17 +3411,17 @@
# the KAI C++ compiler.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
;;
- RCC)
+ RCC*)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
- cxx)
+ cxx*)
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym
-soname $soname `test -n "$verstring" && echo -set_version $verstring`
-update_registry ${objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym
-soname $soname `test -n "$verstring" && echo -set_version $verstring`
-update_registry ${output_objdir}/so_locations -o $lib'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`;
do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp
`test -n "$verstring" && echo -set_version $verstring` -update_registry
$objdir/so_locations -o $lib~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp
`test -n "$verstring" && echo -set_version $verstring` -update_registry
${output_objdir}/so_locations -o $lib~
$rm $lib.exp'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -3301,7 +3440,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved
${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" &&
echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${objdir}/so_locations -o $lib'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib
${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" &&
echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath
${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -3325,7 +3464,7 @@
sco*)
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
case $cc_basename in
- CC)
+ CC*)
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
@@ -3337,12 +3476,12 @@
;;
sunos4*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.x
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
- lcc)
+ lcc*)
# Lucid
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -3355,36 +3494,33 @@
;;
solaris*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.2, 5.x and Centerline C++
+ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib
-h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}
-h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects
$compiler_flags'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o
$lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm
$lib.exp'
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The C++ compiler is used as linker so we must use $wl
# flag to pass the commands to the underlying system
- # linker.
+ # linker. We must also pass each convience library through
+ # to the system linker between allextract/defaultextract.
+ # The C++ compiler will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z
${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z
${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}-z ${wl}defaultextract'
;;
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext
2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
+ output_verbose_link_cmd='echo'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -3392,7 +3528,7 @@
# in the archive.
_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
;;
- gcx)
+ gcx*)
# Green Hills C++ Compiler
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
@@ -3435,7 +3571,7 @@
;;
tandem*)
case $cc_basename in
- NCC)
+ NCC*)
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -3541,7 +3677,7 @@
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e
\"$no_glob_subst\"`"
+ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e
"$no_glob_subst"`
for p in `eval $output_verbose_link_cmd`; do
case $p in
@@ -3617,6 +3753,21 @@
$rm -f confest.$objext
+# PORTME: override above test on systems where it is broken
+ifelse([$1],[CXX],
+[case $host_os in
+solaris*)
+ case $cc_basename in
+ CC*)
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
+ ;;
+ esac
+esac
+])
+
case " $_LT_AC_TAGVAR(postdeps, $1) " in
*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
esac
@@ -3667,12 +3818,16 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${F77-"f77"}
compiler=$CC
_LT_AC_TAGVAR(compiler, $1)=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+_LT_CC_BASENAME([$compiler])
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
@@ -3682,7 +3837,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
-case "$host_os" in
+case $host_os in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
@@ -3691,7 +3846,9 @@
fi
;;
aix4* | aix5*)
- test "$enable_shared" = yes && enable_static=no
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
;;
esac
AC_MSG_RESULT([$enable_shared])
@@ -3742,20 +3899,27 @@
lt_simple_compile_test_code="class foo {}\n"
# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void
main(String[] argv) {}; }\n'
+lt_simple_link_test_code='public class conftest { public static void
main(String[[]] argv) {}; }\n'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${GCJ-"gcj"}
compiler=$CC
_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
AC_LIBTOOL_PROG_COMPILER_PIC($1)
AC_LIBTOOL_PROG_CC_C_O($1)
@@ -3798,11 +3962,16 @@
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_AC_SYS_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${RC-"windres"}
compiler=$CC
_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
AC_LIBTOOL_CONFIG($1)
@@ -3938,7 +4107,7 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -3949,11 +4118,11 @@
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e s/^X//"
+Xsed="$SED -e 1s/^X//"
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# The names of the tagged configurations supported by this script.
available_tags=
@@ -3984,7 +4153,13 @@
# The host system.
host_alias=$host_alias
host=$host
+host_os=$host_os
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
# An echo program that does not interpret backslashes.
echo=$lt_echo
@@ -4060,7 +4235,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
@@ -4334,9 +4509,6 @@
# Regexp to match symbols that can be accessed directly from C.
sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
@@ -4358,6 +4530,13 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int
\1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/
{\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/
{\"\2\", (lt_ptr) \&\2},/p'"
;;
+linux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDGIRSTW]]'
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int
\1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/
{\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/
{\"\2\", (lt_ptr) \&\2},/p'"
+ fi
+ ;;
irix* | nonstopux*)
symcode='[[BCDEGRST]]'
;;
@@ -4389,8 +4568,11 @@
# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
# Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[
]]\($symcode$symcode*\)[[ ]][[
]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[
]]\($symcode$symcode*\)[[ ]][[
]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
# Check to see that the pipe works correctly.
pipe_works=no
@@ -4554,7 +4736,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
;;
*)
@@ -4579,18 +4761,28 @@
;;
chorus*)
case $cc_basename in
- cxch68)
+ cxch68*)
# Green Hills C++ Compiler
# _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation
-u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a
$MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
;;
esac
;;
+ darwin*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ case $cc_basename in
+ xlc*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ esac
+ ;;
dgux*)
case $cc_basename in
- ec++)
+ ec++*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
- ghcx)
+ ghcx*)
# Green Hills C++ Compiler
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
@@ -4598,22 +4790,22 @@
;;
esac
;;
- freebsd* | kfreebsd*-gnu)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
case $cc_basename in
- CC)
+ CC*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a
${ac_cv_prog_cc_wl}archive"
if test "$host_cpu" != ia64; then
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
- aCC)
+ aCC*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a
${ac_cv_prog_cc_wl}archive"
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -4628,7 +4820,7 @@
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
- CC)
+ CC*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
# CC pic flag -KPIC is the default.
@@ -4639,18 +4831,24 @@
;;
linux*)
case $cc_basename in
- KCC)
+ KCC*)
# KAI C++ Compiler
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
- icpc)
+ icpc* | ecpc*)
# Intel C++
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
- cxx)
+ pgCC*)
+ # Portland Group C++ compiler.
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
@@ -4667,7 +4865,7 @@
;;
mvs*)
case $cc_basename in
- cxx)
+ cxx*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
;;
*)
@@ -4678,14 +4876,14 @@
;;
osf3* | osf4* | osf5*)
case $cc_basename in
- KCC)
+ KCC*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
;;
- RCC)
+ RCC*)
# Rational C++ 2.4.1
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
- cxx)
+ cxx*)
# Digital/Compaq C++
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
@@ -4701,7 +4899,7 @@
;;
sco*)
case $cc_basename in
- CC)
+ CC*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
*)
@@ -4710,13 +4908,13 @@
;;
solaris*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.2, 5.x and Centerline C++
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
;;
- gcx)
+ gcx*)
# Green Hills C++ Compiler
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
;;
@@ -4726,12 +4924,12 @@
;;
sunos4*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.x
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
- lcc)
+ lcc*)
# Lucid
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
;;
@@ -4741,7 +4939,7 @@
;;
tandem*)
case $cc_basename in
- NCC)
+ NCC*)
# NonStop-UX NCC 3.20
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
;;
@@ -4812,7 +5010,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -4838,6 +5036,16 @@
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
fi
;;
+ darwin*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ case $cc_basename in
+ xlc*)
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ esac
+ ;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
@@ -4849,7 +5057,7 @@
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -4873,12 +5081,19 @@
;;
linux*)
- case $CC in
+ case $cc_basename in
icc* | ecc*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
ccc*)
_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
# All Alpha code is PIC.
@@ -4899,9 +5114,14 @@
;;
solaris*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
;;
sunos4*)
@@ -4923,6 +5143,11 @@
fi
;;
+ unicos*)
+ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
uts4*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -4950,7 +5175,7 @@
[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
fi
-case "$host_os" in
+case $host_os in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
@@ -4983,7 +5208,7 @@
_LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
;;
cygwin* | mingw*)
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' |
$SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.*
__nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\''
| sort | uniq > $export_symbols'
;;
linux*)
_LT_AC_TAGVAR(link_all_deplibs, $1)=no
@@ -5029,7 +5254,8 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
-
+ # Just being paranoid about ensuring that cc_basename is set.
+ _LT_CC_BASENAME([$compiler])
case $host_os in
cygwin* | mingw* | pw32*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
@@ -5049,6 +5275,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ _LT_AC_TAGVAR(whole_archive_flag_spec,
$1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>/dev/null` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
@@ -5099,7 +5346,7 @@
_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_AC_TAGVAR(always_export_symbols, $1)=no
_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' |
$SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience |
$global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' |
$SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000
${wl}--out-implib,$lib'
@@ -5113,10 +5360,42 @@
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs
$compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000
${wl}--out-implib,$lib'
else
- ld_shlibs=no
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
fi
;;
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ tmp_addflag=
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for
conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for
conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ esac
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs
$deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test $supports_anon_versioning = yes; then
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ $echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver
-o $lib'
+ fi
+ _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+ else
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs
$linker_flags -o $lib'
@@ -5155,32 +5434,6 @@
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
- if test $supports_anon_versioning = yes; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname
${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- else
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds"
- fi
- _LT_AC_TAGVAR(link_all_deplibs, $1)=no
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
@@ -5191,16 +5444,11 @@
;;
esac
- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec,
$1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
+ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
@@ -5264,7 +5512,7 @@
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
@@ -5285,6 +5533,9 @@
fi
esac
shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
else
# not using gcc
if test "$host_cpu" = ia64; then
@@ -5329,7 +5580,7 @@
# Exported symbols can be pulled into shared objects from archives
_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds it's shared
libraries.
+ # This is similar to how AIX traditionally builds its shared
libraries.
_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags
${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@@ -5343,7 +5594,7 @@
_LT_AC_TAGVAR(ld_shlibs, $1)=no
;;
- bsdi4*)
+ bsdi[[45]]*)
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
;;
@@ -5364,57 +5615,57 @@
_LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
# FIXME: Should let the user specify the lib program.
_LT_AC_TAGVAR(old_archive_cmds, $1)='lib
/OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
+ _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
darwin* | rhapsody*)
- if test "$GXX" = yes ; then
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined
${wl}suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace
${wl}-undefined ${wl}suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[[012]])
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace
${wl}-undefined ${wl}suppress'
+ ;;
+ 10.*)
+ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined
${wl}dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- case "$host_os" in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined
suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace
-undefined suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring'
- fi
- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load
$allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
- else
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
_LT_AC_TAGVAR(hardcode_direct, $1)=no
_LT_AC_TAGVAR(hardcode_automatic, $1)=yes
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+ if test "$GCC" = yes ; then
+ output_verbose_link_cmd='echo'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname
$verstring'
+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin lds
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname
$verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ case $cc_basename in
+ xlc*)
+ output_verbose_link_cmd='echo'
+ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo
$rpath/$soname` $verstring'
+ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it
doesn't exist in older darwin lds
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name
${wl}$rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[
]*,," -e "s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+ *)
+ _LT_AC_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
fi
;;
@@ -5448,7 +5699,7 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | kfreebsd*-gnu)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs
$compiler_flags'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_AC_TAGVAR(hardcode_direct, $1)=yes
@@ -5473,7 +5724,7 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o
$lib $libobjs $deplibs $compiler_flags'
;;
@@ -5482,7 +5733,7 @@
;;
esac
else
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs
$deplibs $linker_flags'
;;
@@ -5492,7 +5743,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*)
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
@@ -5559,6 +5810,7 @@
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs
$deplibs $compiler_flags'
+ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib
$libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
else
@@ -5604,7 +5856,7 @@
_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag}
$libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" &&
echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o
$lib'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`;
do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">>
$lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5623,10 +5875,12 @@
solaris*)
_LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
if test "$GCC" = yes; then
+ wlarc='${wl}'
_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o
$lib $libobjs $deplibs $compiler_flags'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
$CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib
$libobjs $deplibs $compiler_flags~$rm $lib.exp'
else
+ wlarc=''
_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h
$soname -o $lib $libobjs $deplibs $linker_flags'
_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" >
$lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo
"local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs
$deplibs $linker_flags~$rm $lib.exp'
@@ -5635,8 +5889,18 @@
_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience
-z defaultextract' ;;
+ *)
+ # The compiler driver will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl, iff we do not link with $LD.
+ # Luckily, gcc supports the same syntax we need for Sun Studio.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ case $wlarc in
+ '')
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience
-z defaultextract' ;;
+ *)
+ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z
${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}-z ${wl}defaultextract' ;;
+ esac ;;
esac
_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
;;
@@ -5897,7 +6161,7 @@
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && break
+ test ! -f $lt_ac_sed && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -5922,14 +6186,13 @@
fi
done
done
+])
SED=$lt_cv_path_SED
-])
AC_MSG_RESULT([$SED])
])
# serial 6 AC_LIB_LTDL
-# Debian $Rev: 214 $
# AC_WITH_LTDL
# ------------
@@ -5966,7 +6229,7 @@
if test "x$with_included_ltdl" = xno; then
# If the included ltdl is not to be used. then Use the
# preinstalled libltdl we found.
- AC_DEFINE([HAVE_LTDL], 1,
+ AC_DEFINE([HAVE_LTDL], [1],
[Define this if a modern libltdl is already installed])
LIBLTDL=-lltdl
fi
@@ -6050,7 +6313,7 @@
# Assuming the user has installed a libdl from somewhere, this is true
# If you are looking for one http://www.opendarwin.org/projects/dlcompat
libltdl_cv_sys_dlopen_deplibs=yes
- ;;
+ ;;
gnu* | linux* | kfreebsd*-gnu | knetbsd*-gnu)
# GNU and its variants, using gnu ld.so (Glibc)
libltdl_cv_sys_dlopen_deplibs=yes
@@ -6119,7 +6382,7 @@
eval libltdl_cv_shlibext=$shrext_cmds
])
if test -n "$libltdl_cv_shlibext"; then
- AC_DEFINE_UNQUOTED(LTDL_SHLIB_EXT, "$libltdl_cv_shlibext",
+ AC_DEFINE_UNQUOTED([LTDL_SHLIB_EXT], ["$libltdl_cv_shlibext"],
[Define to the extension used for shared libraries, say, ".so".])
fi
])# AC_LTDL_SHLIBEXT
@@ -6132,7 +6395,7 @@
AC_CACHE_CHECK([which variable specifies run-time library path],
[libltdl_cv_shlibpath_var], [libltdl_cv_shlibpath_var="$shlibpath_var"])
if test -n "$libltdl_cv_shlibpath_var"; then
- AC_DEFINE_UNQUOTED(LTDL_SHLIBPATH_VAR, "$libltdl_cv_shlibpath_var",
+ AC_DEFINE_UNQUOTED([LTDL_SHLIBPATH_VAR], ["$libltdl_cv_shlibpath_var"],
[Define to the name of the environment variable that determines the
dynamic library search path.])
fi
])# AC_LTDL_SHLIBPATH
@@ -6154,7 +6417,7 @@
sys_search_path="$sys_search_path$PATH_SEPARATOR$dir"
fi
done
- AC_DEFINE_UNQUOTED(LTDL_SYSSEARCHPATH, "$sys_search_path",
+ AC_DEFINE_UNQUOTED([LTDL_SYSSEARCHPATH], ["$sys_search_path"],
[Define to the system default library search path.])
fi
])# AC_LTDL_SYSSEARCHPATH
@@ -6180,7 +6443,7 @@
rmdir .libs 2>/dev/null
fi
])
-AC_DEFINE_UNQUOTED(LTDL_OBJDIR, "$libltdl_cv_objdir/",
+AC_DEFINE_UNQUOTED([LTDL_OBJDIR], ["$libltdl_cv_objdir/"],
[Define to the sub-directory in which libtool stores uninstalled libraries.])
])# AC_LTDL_OBJDIR
@@ -6198,7 +6461,7 @@
fi
])
if test x"$libltdl_cv_preloaded_symbols" = xyes; then
- AC_DEFINE(HAVE_PRELOADED_SYMBOLS, 1,
+ AC_DEFINE([HAVE_PRELOADED_SYMBOLS], [1],
[Define if libtool can extract symbol lists from object files.])
fi
])# AC_LTDL_DLPREOPEN
@@ -6317,7 +6580,7 @@
fi
if test x"$libltdl_cv_need_uscore" = xyes; then
- AC_DEFINE(NEED_USCORE, 1,
+ AC_DEFINE([NEED_USCORE], [1],
[Define if dlsym() requires a leading underscore in symbol names.])
fi
])# AC_LTDL_DLSYM_USCORE
Modified: gnunet-gtk/libltdl/config.guess
===================================================================
--- gnunet-gtk/libltdl/config.guess 2005-12-23 23:20:32 UTC (rev 2397)
+++ gnunet-gtk/libltdl/config.guess 2005-12-23 23:34:27 UTC (rev 2398)
@@ -3,7 +3,7 @@
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-timestamp='2005-04-22'
+timestamp='2005-08-03'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -17,13 +17,15 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+
# Originally written by Per Bothner <address@hidden>.
# Please send patches to <address@hidden>. Submit a context
# diff and a properly formatted ChangeLog entry.
@@ -66,11 +68,11 @@
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
+ echo "$timestamp" ; exit ;;
--version | -v )
- echo "$version" ; exit 0 ;;
+ echo "$version" ; exit ;;
--help | --h* | -h )
- echo "$usage"; exit 0 ;;
+ echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
@@ -123,7 +125,7 @@
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
+esac ; set_cc_for_build= ;'
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (address@hidden 1994-08-24)
@@ -196,55 +198,20 @@
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
echo "${machine}-${os}${release}"
- exit 0 ;;
- amd64:OpenBSD:*:*)
- echo x86_64-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- cats:OpenBSD:*:*)
- echo arm-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- luna88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mips64-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
*:ekkoBSD:*:*)
echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
macppc:MirBSD:*:*)
echo powerppc-unknown-mirbsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
@@ -297,40 +264,43 @@
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e
's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
+ exit ;;
Alpha\ *:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# Should we change UNAME_MACHINE based on the output of uname instead
# of the specific Alpha model?
echo alpha-pc-interix
- exit 0 ;;
+ exit ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
- exit 0 ;;
+ exit ;;
Amiga*:UNIX_System_V:4.0:*)
echo m68k-unknown-sysv4
- exit 0;;
+ exit ;;
*:[Aa]miga[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
+ exit ;;
*:[Mm]orph[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-morphos
- exit 0 ;;
+ exit ;;
*:OS/390:*:*)
echo i370-ibm-openedition
- exit 0 ;;
+ exit ;;
*:z/VM:*:*)
echo s390-ibm-zvmoe
- exit 0 ;;
+ exit ;;
*:OS400:*:*)
echo powerpc-ibm-os400
- exit 0 ;;
+ exit ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
+ exit ;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# address@hidden (Earle F. Ake) contributed MIS and NILE.
if test "`(/bin/universe) 2>/dev/null`" = att ; then
@@ -338,32 +308,32 @@
else
echo pyramid-pyramid-bsd
fi
- exit 0 ;;
+ exit ;;
NILE*:*:*:dcosx)
echo pyramid-pyramid-svr4
- exit 0 ;;
+ exit ;;
DRS?6000:unix:4.0:6*)
echo sparc-icl-nx6
- exit 0 ;;
+ exit ;;
DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7 && exit 0 ;;
+ sparc) echo sparc-icl-nx7; exit ;;
esac ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
i86pc:SunOS:5.*:*)
echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
Series*|S4*)
@@ -372,10 +342,10 @@
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
+ exit ;;
sun3*:SunOS:*:*)
echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}')
2>/dev/null`
test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
@@ -387,10 +357,10 @@
echo sparc-sun-sunos${UNAME_RELEASE}
;;
esac
- exit 0 ;;
+ exit ;;
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
@@ -401,40 +371,40 @@
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
m68k:machten:*:*)
echo m68k-apple-machten${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
- exit 0 ;;
+ exit ;;
RISC*:ULTRIX:*:*)
echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
2020:CLIX:*:* | 2430:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
@@ -458,32 +428,33 @@
exit (-1);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c \
- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && exit 0
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
Motorola:PowerMAX_OS:*:*)
echo powerpc-motorola-powermax
- exit 0 ;;
+ exit ;;
Motorola:*:4.3:PL8-*)
echo powerpc-harris-powermax
- exit 0 ;;
+ exit ;;
Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
echo powerpc-harris-powermax
- exit 0 ;;
+ exit ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
- exit 0 ;;
+ exit ;;
m88k:CX/UX:7*:*)
echo m88k-harris-cxux7
- exit 0 ;;
+ exit ;;
m88k:*:4*:R4*)
echo m88k-motorola-sysv4
- exit 0 ;;
+ exit ;;
m88k:*:3*:R3*)
echo m88k-motorola-sysv3
- exit 0 ;;
+ exit ;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
@@ -499,29 +470,29 @@
else
echo i586-dg-dgux${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
- exit 0 ;;
+ exit ;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
echo m88k-motorola-sysv3
- exit 0 ;;
+ exit ;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
echo m88k-tektronix-sysv3
- exit 0 ;;
+ exit ;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
echo m68k-tektronix-bsd
- exit 0 ;;
+ exit ;;
*:IRIX*:*:*)
echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
+ exit ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
i*86:AIX:*:*)
echo i386-ibm-aix
- exit 0 ;;
+ exit ;;
ia64:AIX:*:*)
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
@@ -529,7 +500,7 @@
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
+ exit ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
eval $set_cc_for_build
@@ -544,14 +515,18 @@
exit(0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
- echo rs6000-ibm-aix3.2.5
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
else
echo rs6000-ibm-aix3.2
fi
- exit 0 ;;
+ exit ;;
*:AIX:*:[45])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk
'{ print $1 }'`
if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1;
then
@@ -565,28 +540,28 @@
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
+ exit ;;
*:AIX:*:*)
echo rs6000-ibm-aix
- exit 0 ;;
+ exit ;;
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
- exit 0 ;;
+ exit ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
+ exit ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
- exit 0 ;;
+ exit ;;
DPX/2?00:B.O.S.:*:*)
echo m68k-bull-sysv3
- exit 0 ;;
+ exit ;;
9000/[34]??:4.3bsd:1.*:*)
echo m68k-hp-bsd
- exit 0 ;;
+ exit ;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
echo m68k-hp-bsd4.4
- exit 0 ;;
+ exit ;;
9000/[34678]??:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "${UNAME_MACHINE}" in
@@ -648,9 +623,19 @@
esac
if [ ${HP_ARCH} = "hppa2.0w" ]
then
- # avoid double evaluation of $set_cc_for_build
- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__
>/dev/null
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep __LP64__ >/dev/null
then
HP_ARCH="hppa2.0w"
else
@@ -658,11 +643,11 @@
fi
fi
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
+ exit ;;
ia64:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
+ exit ;;
3050*:HI-UX:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
@@ -690,161 +675,166 @@
exit (0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
echo unknown-hitachi-hiuxwe2
- exit 0 ;;
+ exit ;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
echo hppa1.1-hp-bsd
- exit 0 ;;
+ exit ;;
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
- exit 0 ;;
+ exit ;;
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
echo hppa1.0-hp-mpeix
- exit 0 ;;
+ exit ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
- exit 0 ;;
+ exit ;;
hp8??:OSF1:*:*)
echo hppa1.0-hp-osf
- exit 0 ;;
+ exit ;;
i*86:OSF1:*:*)
if [ -x /usr/sbin/sysversion ] ; then
echo ${UNAME_MACHINE}-unknown-osf1mk
else
echo ${UNAME_MACHINE}-unknown-osf1
fi
- exit 0 ;;
+ exit ;;
parisc*:Lites*:*:*)
echo hppa1.1-hp-lites
- exit 0 ;;
+ exit ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
- exit 0 ;;
+ exit ;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit 0 ;;
+ exit ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
echo c34-convex-bsd
- exit 0 ;;
+ exit ;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
echo c38-convex-bsd
- exit 0 ;;
+ exit ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
- exit 0 ;;
+ exit ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*[A-Z]90:*:*:*)
echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*TS:*:*:*)
echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*T3E:*:*:*)
echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*SV1:*:*:*)
echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
*:UNICOS/mp:*:*)
echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz'`
FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
+ exit ;;
5000:UNIX_System_V:4.*:*)
FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
+ exit ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
sparc*:BSD/OS:*:*)
echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:FreeBSD:*:*)
echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e
's/[-(].*//'`
- exit 0 ;;
+ exit ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
+ exit ;;
i*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
+ exit ;;
x86:Interix*:[34]*)
echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
- exit 0 ;;
+ exit ;;
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
echo i${UNAME_MACHINE}-pc-mks
- exit 0 ;;
+ exit ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
# UNAME_MACHINE based on the output of uname instead of i386?
echo i586-pc-interix
- exit 0 ;;
+ exit ;;
i*:UWIN*:*)
echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
- amd64:CYGWIN*:*:*)
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
echo x86_64-unknown-cygwin
- exit 0 ;;
+ exit ;;
p*:CYGWIN*:*)
echo powerpcle-unknown-cygwin
- exit 0 ;;
+ exit ;;
prep*:SunOS:5.*:*)
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e
's/[^.]*//'`
- exit 0 ;;
+ exit ;;
*:GNU:*:*)
# the GNU system
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo
${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
+ exit ;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,'
| tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit 0 ;;
+ exit ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
+ exit ;;
arm*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
cris:Linux:*:*)
echo cris-axis-linux-gnu
- exit 0 ;;
+ exit ;;
crisv32:Linux:*:*)
echo crisv32-axis-linux-gnu
- exit 0 ;;
+ exit ;;
frv:Linux:*:*)
echo frv-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
m32r*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
m68*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
mips:Linux:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
@@ -862,7 +852,7 @@
#endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
;;
mips64:Linux:*:*)
eval $set_cc_for_build
@@ -881,14 +871,17 @@
#endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
ppc:Linux:*:*)
echo powerpc-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
ppc64:Linux:*:*)
echo powerpc64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
EV5) UNAME_MACHINE=alphaev5 ;;
@@ -902,7 +895,7 @@
objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
+ exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -910,25 +903,25 @@
PA8*) echo hppa2.0-unknown-linux-gnu ;;
*) echo hppa-unknown-linux-gnu ;;
esac
- exit 0 ;;
+ exit ;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
echo hppa64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
+ exit ;;
sh64*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
sh*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
sparc:Linux:*:* | sparc64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
x86_64:Linux:*:*)
echo x86_64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
i*86:Linux:*:*)
# The BFD linker knows what the default object file format is, so
# first see if it will tell us. cd to the root directory to prevent
@@ -946,15 +939,15 @@
;;
a.out-i386-linux)
echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
+ exit ;;
coff-i386)
echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
+ exit ;;
"")
# Either a pre-BFD a.out linker (linux-gnuoldld) or
# one that does not give us useful --help.
echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
+ exit ;;
esac
# Determine whether the default compiler is a.out or elf
eval $set_cc_for_build
@@ -982,15 +975,18 @@
#endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" &&
exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ test x"${LIBC}" != x && {
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit
+ }
+ test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
# sysname and nodename.
echo i386-sequent-sysv4
- exit 0 ;;
+ exit ;;
i*86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
@@ -998,27 +994,27 @@
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
+ exit ;;
i*86:OS/2:*:*)
# If we were able to find `uname', then EMX Unix compatibility
# is probably installed.
echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
+ exit ;;
i*86:XTS-300:*:STOP)
echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
+ exit ;;
i*86:atheos:*:*)
echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
- i*86:syllable:*:*)
+ exit ;;
+ i*86:syllable:*:*)
echo ${UNAME_MACHINE}-pc-syllable
- exit 0 ;;
+ exit ;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
i*86:*DOS:*:*)
echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
+ exit ;;
i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -1026,15 +1022,16 @@
else
echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
fi
- exit 0 ;;
- i*86:*:5:[78]*)
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
case `/bin/uname -X | grep "^Machine"` in
*486*) UNAME_MACHINE=i486 ;;
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
echo
${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
+ exit ;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
@@ -1052,73 +1049,73 @@
else
echo ${UNAME_MACHINE}-pc-sysv32
fi
- exit 0 ;;
+ exit ;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i386.
echo i386-pc-msdosdjgpp
- exit 0 ;;
+ exit ;;
Intel:Mach:3*:*)
echo i386-pc-mach3
- exit 0 ;;
+ exit ;;
paragon:*:*:*)
echo i860-intel-osf1
- exit 0 ;;
+ exit ;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
fi
- exit 0 ;;
+ exit ;;
mini*:CTIX:SYS*5:*)
# "miniframe"
echo m68010-convergent-sysv
- exit 0 ;;
+ exit ;;
mc68k:UNIX:SYSTEM5:3.51m)
echo m68k-convergent-sysv
- exit 0 ;;
+ exit ;;
M680?0:D-NIX:5.3:*)
echo m68k-diab-dnix
- exit 0 ;;
+ exit ;;
M68*:*:R3V[5678]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 |
3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 |
SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
+ && { echo i486-ncr-sysv4; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
- exit 0 ;;
+ exit ;;
TSUNAMI:LynxOS:2.*:*)
echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
rs6000:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SM[BE]S:UNIX_SV:*:*)
echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
RM*:ReliantUNIX-*:*:*)
echo mips-sni-sysv4
- exit 0 ;;
+ exit ;;
RM*:SINIX-*:*:*)
echo mips-sni-sysv4
- exit 0 ;;
+ exit ;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
@@ -1126,65 +1123,65 @@
else
echo ns32k-sni-sysv
fi
- exit 0 ;;
+ exit ;;
PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
# says <address@hidden>
echo i586-unisys-sysv4
- exit 0 ;;
+ exit ;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes <address@hidden>.
# How about differentiating between stratus architectures? -djm
echo hppa1.1-stratus-sysv4
- exit 0 ;;
+ exit ;;
*:*:*:FTX*)
# From address@hidden
echo i860-stratus-sysv4
- exit 0 ;;
+ exit ;;
i*86:VOS:*:*)
# From address@hidden
echo ${UNAME_MACHINE}-stratus-vos
- exit 0 ;;
+ exit ;;
*:VOS:*:*)
# From address@hidden
echo hppa1.1-stratus-vos
- exit 0 ;;
+ exit ;;
mc68*:A/UX:*:*)
echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
news*:NEWS-OS:6*:*)
echo mips-sony-newsos6
- exit 0 ;;
+ exit ;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
echo mips-nec-sysv${UNAME_RELEASE}
else
echo mips-unknown-sysv${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
echo powerpc-be-beos
- exit 0 ;;
+ exit ;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
echo powerpc-apple-beos
- exit 0 ;;
+ exit ;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
echo i586-pc-beos
- exit 0 ;;
+ exit ;;
SX-4:SUPER-UX:*:*)
echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SX-5:SUPER-UX:*:*)
echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SX-6:SUPER-UX:*:*)
echo sx6-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Rhapsody:*:*)
echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
case $UNAME_PROCESSOR in
@@ -1192,7 +1189,7 @@
unknown) UNAME_PROCESSOR=powerpc ;;
esac
echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
if test "$UNAME_PROCESSOR" = "x86"; then
@@ -1200,25 +1197,25 @@
UNAME_MACHINE=pc
fi
echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:QNX:*:4*)
echo i386-pc-qnx
- exit 0 ;;
+ exit ;;
NSE-?:NONSTOP_KERNEL:*:*)
echo nse-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
NSR-?:NONSTOP_KERNEL:*:*)
echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:NonStop-UX:*:*)
echo mips-compaq-nonstopux
- exit 0 ;;
+ exit ;;
BS2000:POSIX*:*:*)
echo bs2000-siemens-sysv
- exit 0 ;;
+ exit ;;
DS/*:UNIX_System_V:*:*)
echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
@@ -1229,41 +1226,44 @@
UNAME_MACHINE="$cputype"
fi
echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
+ exit ;;
*:TOPS-10:*:*)
echo pdp10-unknown-tops10
- exit 0 ;;
+ exit ;;
*:TENEX:*:*)
echo pdp10-unknown-tenex
- exit 0 ;;
+ exit ;;
KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
echo pdp10-dec-tops20
- exit 0 ;;
+ exit ;;
XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
echo pdp10-xkl-tops20
- exit 0 ;;
+ exit ;;
*:TOPS-20:*:*)
echo pdp10-unknown-tops20
- exit 0 ;;
+ exit ;;
*:ITS:*:*)
echo pdp10-unknown-its
- exit 0 ;;
+ exit ;;
SEI:*:*:SEIUX)
echo mips-sei-seiux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:DragonFly:*:*)
echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e
's/[-(].*//'`
- exit 0 ;;
+ exit ;;
*:*VMS:*:*)
UNAME_MACHINE=`(uname -p) 2>/dev/null`
case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms && exit 0 ;;
- I*) echo ia64-dec-vms && exit 0 ;;
- V*) echo vax-dec-vms && exit 0 ;;
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
esac ;;
*:XENIX:*:SysV)
echo i386-pc-xenix
- exit 0 ;;
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/
.*$//'
+ exit ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1295,7 +1295,7 @@
#endif
#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
+ printf ("arm-acorn-riscix\n"); exit (0);
#endif
#if defined (hp300) && !defined (hpux)
@@ -1384,11 +1384,12 @@
}
EOF
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
# Apollos put the system type in the environment.
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
# Convex versions that predate uname can use getsysinfo(1)
@@ -1397,22 +1398,22 @@
case `getsysinfo -f cpu_type` in
c1*)
echo c1-convex-bsd
- exit 0 ;;
+ exit ;;
c2*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit 0 ;;
+ exit ;;
c34*)
echo c34-convex-bsd
- exit 0 ;;
+ exit ;;
c38*)
echo c38-convex-bsd
- exit 0 ;;
+ exit ;;
c4*)
echo c4-convex-bsd
- exit 0 ;;
+ exit ;;
esac
fi
Modified: gnunet-gtk/libltdl/config.sub
===================================================================
--- gnunet-gtk/libltdl/config.sub 2005-12-23 23:20:32 UTC (rev 2397)
+++ gnunet-gtk/libltdl/config.sub 2005-12-23 23:34:27 UTC (rev 2398)
@@ -3,7 +3,7 @@
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-timestamp='2005-04-22'
+timestamp='2005-07-08'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -21,14 +21,15 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+
# Please send patches to <address@hidden>. Submit a context
# diff and a properly formatted ChangeLog entry.
#
@@ -83,11 +84,11 @@
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
+ echo "$timestamp" ; exit ;;
--version | -v )
- echo "$version" ; exit 0 ;;
+ echo "$version" ; exit ;;
--help | --h* | -h )
- echo "$usage"; exit 0 ;;
+ echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
@@ -99,7 +100,7 @@
*local*)
# First pass through any local machine types.
echo $1
- exit 0;;
+ exit ;;
* )
break ;;
@@ -247,6 +248,7 @@
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
@@ -255,13 +257,14 @@
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
+ | ms1 \
| msp430 \
| ns16k | ns32k \
- | openrisc | or32 \
+ | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
- | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le |
sh3ele \
+ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle |
sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b \
@@ -273,6 +276,9 @@
| z8k)
basic_machine=$basic_machine-unknown
;;
+ m32c)
+ basic_machine=$basic_machine-unknown
+ ;;
m6811 | m68hc11 | m6812 | m68hc12)
# Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
@@ -321,6 +327,7 @@
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
@@ -329,6 +336,7 @@
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipstx39-* | mipstx39el-* \
| mmix-* \
+ | ms1-* \
| msp430-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| orion-* \
@@ -336,7 +344,7 @@
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
| sparclite-* \
@@ -351,6 +359,8 @@
| ymp-* \
| z8k-*)
;;
+ m32c-*)
+ ;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
@@ -761,9 +771,8 @@
basic_machine=hppa1.1-oki
os=-proelf
;;
- or32 | or32-*)
+ openrisc | openrisc-*)
basic_machine=or32-unknown
- os=-coff
;;
os400)
basic_machine=powerpc-ibm
@@ -1089,12 +1098,9 @@
we32k)
basic_machine=we32k-att
;;
- sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+ sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
- sh64)
- basic_machine=sh64-unknown
- ;;
sparc | sparcv8 | sparcv9 | sparcv9b)
basic_machine=sparc-sun
;;
@@ -1181,7 +1187,8 @@
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1199,7 +1206,7 @@
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku*
\
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
@@ -1388,6 +1395,9 @@
*-be)
os=-beos
;;
+ *-haiku)
+ os=-haiku
+ ;;
*-ibm)
os=-aix
;;
@@ -1559,7 +1569,7 @@
esac
echo $basic_machine$os
-exit 0
+exit
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
Modified: gnunet-gtk/libltdl/configure
===================================================================
--- gnunet-gtk/libltdl/configure 2005-12-23 23:20:32 UTC (rev 2397)
+++ gnunet-gtk/libltdl/configure 2005-12-23 23:34:27 UTC (rev 2398)
@@ -280,15 +280,15 @@
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo
test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
- echo_test_string="`eval $cmd`" &&
+ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+ echo_test_string=`eval $cmd` &&
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
@@ -3420,7 +3420,7 @@
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && break
+ test ! -f $lt_ac_sed && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -3445,10 +3445,10 @@
fi
done
done
-SED=$lt_cv_path_SED
fi
+SED=$lt_cv_path_SED
echo "$as_me:$LINENO: result: $SED" >&5
echo "${ECHO_T}$SED" >&6
@@ -3525,7 +3525,7 @@
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
+ # but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
@@ -3559,7 +3559,7 @@
if test "${lt_cv_prog_gnu_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
@@ -3589,6 +3589,15 @@
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$CC -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
@@ -3675,7 +3684,7 @@
lt_cv_deplibs_check_method=pass_all
;;
-bsdi4*)
+bsdi[45]*)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared
object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
@@ -3698,13 +3707,13 @@
lt_cv_deplibs_check_method=pass_all
;;
-freebsd* | kfreebsd*-gnu)
+freebsd* | kfreebsd*-gnu | dragonfly*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86
(compact )?demand paged shared library'
+ lt_cv_deplibs_check_method='file_magic
(FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
@@ -3720,7 +3729,7 @@
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9])
shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
@@ -3770,12 +3779,10 @@
;;
openbsd*)
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared
object'
+ lt_cv_deplibs_check_method='match_pattern
/lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
else
- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+ lt_cv_deplibs_check_method='match_pattern
/lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
fi
;;
@@ -3867,7 +3874,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 3870 "configure"' > conftest.$ac_ext
+ echo '#line 3877 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
@@ -3910,7 +3917,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; then
- case "`/usr/bin/file conftest.o`" in
+ case `/usr/bin/file conftest.o` in
*32-bit*)
case $host in
x86_64-*linux*)
@@ -5350,7 +5357,12 @@
fi
-ac_ext=cc
+
+
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ ac_ext=cc
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS >&5'
@@ -5580,7 +5592,9 @@
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+fi
+
ac_ext=f
ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS
>&5'
@@ -5673,7 +5687,7 @@
# Provide some information about the compiler.
-echo "$as_me:5676:" \
+echo "$as_me:5690:" \
"checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
@@ -5861,11 +5875,38 @@
lt_cv_sys_max_cmd_len=8192;
;;
- *)
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ *)
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$teststring"
2>/dev/null` \
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
= "XX$teststring") >/dev/null 2>&1 &&
new_result=`expr "X$teststring" : ".*" 2>&1` &&
lt_cv_sys_max_cmd_len=$new_result &&
@@ -5911,9 +5952,6 @@
# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \2\3 \3'
-
# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
@@ -5935,6 +5973,13 @@
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int
\1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/
{\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\",
(lt_ptr) \&\2},/p'"
;;
+linux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDGIRSTW]'
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int
\1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/
{\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\",
(lt_ptr) \&\2},/p'"
+ fi
+ ;;
irix* | nonstopux*)
symcode='[BCDEGRST]'
;;
@@ -5966,8 +6011,11 @@
# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
# Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[
][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[
][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
# Check to see that the pipe works correctly.
pipe_works=no
@@ -6129,7 +6177,7 @@
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
+Xsed='sed -e 1s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
@@ -6149,7 +6197,7 @@
default_ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
@@ -6434,6 +6482,17 @@
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
@@ -6459,7 +6518,7 @@
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic
\(.*\)\"`"
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
@@ -6521,7 +6580,7 @@
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic
\(.*\)\"`"
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
@@ -6620,6 +6679,20 @@
compiler=$CC
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
#
# Check for any special shared library compilation flags.
#
@@ -6656,11 +6729,16 @@
LDFLAGS="$LDFLAGS $lt_prog_compiler_static"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The compiler can only warn and ignore the option if not recognized
+ # The linker can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
+ $echo "X$_lt_linker_boilerplate" | $Xsed > conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_prog_compiler_static_works=yes
+ fi
else
lt_prog_compiler_static_works=yes
fi
@@ -6702,18 +6780,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:6708: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:6786: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:6712: \$? = $ac_status" >&5
+ echo "$as_me:6790: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test ! -s conftest.err; then
+ # So say no if there are warnings other than the usual output.
+ $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null;
then
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
@@ -6790,7 +6870,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -6816,6 +6896,16 @@
lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
fi
;;
+ darwin*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ case $cc_basename in
+ xlc*)
+ lt_prog_compiler_pic='-qnocommon'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ esac
+ ;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
@@ -6827,7 +6917,7 @@
lt_prog_compiler_wl='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -6851,12 +6941,19 @@
;;
linux*)
- case $CC in
+ case $cc_basename in
icc* | ecc*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-static'
;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
ccc*)
lt_prog_compiler_wl='-Wl,'
# All Alpha code is PIC.
@@ -6877,9 +6974,14 @@
;;
solaris*)
- lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
;;
sunos4*)
@@ -6901,6 +7003,11 @@
fi
;;
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
uts4*)
lt_prog_compiler_pic='-pic'
lt_prog_compiler_static='-Bstatic'
@@ -6935,18 +7042,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:6941: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7048: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:6945: \$? = $ac_status" >&5
+ echo "$as_me:7052: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test ! -s conftest.err; then
+ # So say no if there are warnings other than the usual output.
+ $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null;
then
lt_prog_compiler_pic_works=yes
fi
fi
@@ -6967,7 +7076,7 @@
fi
fi
-case "$host_os" in
+case $host_os in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
@@ -6995,23 +7104,25 @@
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7001: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7110: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:7005: \$? = $ac_status" >&5
+ echo "$as_me:7114: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- if test ! -s out/conftest.err; then
+ $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp
+ $SED '/^$/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2
>/dev/null; then
lt_cv_prog_compiler_c_o=yes
fi
fi
- chmod u+w .
+ chmod u+w . 2>&5
$rm conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
@@ -7087,6 +7198,16 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
+ # Just being paranoid about ensuring that cc_basename is set.
+ for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
case $host_os in
cygwin* | mingw* | pw32*)
@@ -7107,6 +7228,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience
'"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>/dev/null` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
@@ -7157,7 +7299,7 @@
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe |
$SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.*
//'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe |
$SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW]
/s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o
$output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
@@ -7175,6 +7317,38 @@
fi
;;
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ tmp_addflag=
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ esac
+ archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test $supports_anon_versioning = yes; then
+ archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ $echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver
-o $lib'
+ fi
+ link_all_deplibs=no
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
@@ -7213,32 +7387,6 @@
hardcode_shlibpath_var=no
;;
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname -o $lib'
- archive_cmds="$tmp_archive_cmds"
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname
${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- else
- archive_expsym_cmds="$tmp_archive_cmds"
- fi
- link_all_deplibs=no
- else
- ld_shlibs=no
- fi
- ;;
-
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname -o $lib'
@@ -7249,16 +7397,11 @@
;;
esac
- if test "$ld_shlibs" = yes; then
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience
'"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
@@ -7322,7 +7465,7 @@
link_all_deplibs=yes
if test "$GCC" = yes; then
- case $host_os in aix4.012|aix4.012.*)
+ case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
@@ -7343,6 +7486,9 @@
fi
esac
shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
else
# not using gcc
if test "$host_cpu" = ia64; then
@@ -7487,7 +7633,7 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec=' '
archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds it's shared
libraries.
+ # This is similar to how AIX traditionally builds its shared
libraries.
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname
$libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols
${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@@ -7501,7 +7647,7 @@
ld_shlibs=no
;;
- bsdi4*)
+ bsdi[45]*)
export_dynamic_flag_spec=-rdynamic
;;
@@ -7527,52 +7673,52 @@
;;
darwin* | rhapsody*)
- if test "$GXX" = yes ; then
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ allow_undefined_flag='${wl}-undefined ${wl}suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined
${wl}suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[012])
+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined
${wl}suppress'
+ ;;
+ 10.*)
+ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
archive_cmds_need_lc=no
- case "$host_os" in
- rhapsody* | darwin1.[012])
- allow_undefined_flag='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag='-flat_namespace -undefined suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag='-flat_namespace -undefined suppress'
- ;;
- 10.*)
- allow_undefined_flag='-undefined dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o
$lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- else
- archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs
-nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o
$lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname
$verstring'
- fi
- module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
- else
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec='-all_load $convenience'
+ whole_archive_flag_spec=''
link_all_deplibs=yes
+ if test "$GCC" = yes ; then
+ output_verbose_link_cmd='echo'
+ archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs
$deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs
$deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin lds
+ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname
$verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
else
- ld_shlibs=no
+ case $cc_basename in
+ xlc*)
+ output_verbose_link_cmd='echo'
+ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs
$deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname`
$verstring'
+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs
$deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it
doesn't exist in older darwin lds
+ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name
${wl}$rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
fi
;;
@@ -7606,7 +7752,7 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | kfreebsd*-gnu)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
@@ -7631,7 +7777,7 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs
$deplibs $compiler_flags'
;;
@@ -7640,7 +7786,7 @@
;;
esac
else
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs
$linker_flags'
;;
@@ -7650,7 +7796,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld='+b $libdir'
@@ -7717,6 +7863,7 @@
hardcode_shlibpath_var=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs
$compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs
$compiler_flags ${wl}-retain-symbols-file,$export_symbols'
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
export_dynamic_flag_spec='${wl}-E'
else
@@ -7762,7 +7909,7 @@
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs
$linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s
%s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
@@ -7781,10 +7928,12 @@
solaris*)
no_undefined_flag=' -z text'
if test "$GCC" = yes; then
+ wlarc='${wl}'
archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs
$deplibs $compiler_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols |
$SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib
$libobjs $deplibs $compiler_flags~$rm $lib.exp'
else
+ wlarc=''
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs
$deplibs $linker_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols |
$SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs
$deplibs $linker_flags~$rm $lib.exp'
@@ -7793,8 +7942,18 @@
hardcode_shlibpath_var=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ *)
+ # The compiler driver will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl, iff we do not link with $LD.
+ # Luckily, gcc supports the same syntax we need for Sun Studio.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ case $wlarc in
+ '')
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
;;
+ *)
+ whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}-z ${wl}defaultextract' ;;
+ esac ;;
esac
link_all_deplibs=yes
;;
@@ -8068,7 +8227,7 @@
shlibpath_var=LIBRARY_PATH
;;
-bsdi4*)
+bsdi[45]*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -8096,7 +8255,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo
\$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname'
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
@@ -8126,7 +8286,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
;;
@@ -8149,7 +8309,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n"
"$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep
"^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR,
,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -8184,8 +8344,17 @@
dynamic_linker='GNU ld.so'
;;
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
@@ -8203,7 +8372,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
- freebsd3.01* | freebsdelf3.01*)
+ freebsd3.[01]* | freebsdelf3.[01]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -8230,7 +8399,7 @@
version_type=sunos
need_lib_prefix=no
need_version=no
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
@@ -8329,7 +8498,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf |
tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2));
skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e
's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -8404,7 +8573,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
- need_version=yes
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
@@ -8526,8 +8699,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C"
>&6
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
- test -n "$runpath_var " || \
- test "X$hardcode_automatic"="Xyes" ; then
+ test -n "$runpath_var" || \
+ test "X$hardcode_automatic" = "Xyes" ; then
# We can hardcode non-existant directories.
if test "$hardcode_direct" != no &&
@@ -9186,7 +9359,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 9189 "configure"
+#line 9362 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -9252,7 +9425,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
+ (./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
@@ -9284,7 +9457,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 9287 "configure"
+#line 9460 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -9350,7 +9523,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
+ (./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
@@ -9400,7 +9573,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
-case "$host_os" in
+case $host_os in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
@@ -9413,43 +9586,6 @@
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
- ;;
- darwin* | rhapsody*)
- if test "$GCC" = yes; then
- archive_cmds_need_lc=no
- case "$host_os" in
- rhapsody* | darwin1.[012])
- allow_undefined_flag='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag='-flat_namespace -undefined suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag='-flat_namespace -undefined suppress'
- ;;
- 10.*)
- allow_undefined_flag='-undefined dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- output_verbose_link_cmd='echo'
- archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs
$deplibs$compiler_flags -install_name $rpath/$soname $verstring'
- module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs
$deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag
-o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname
$verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&,"
< $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC
$allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit
-s $output_objdir/${libname}-symbols.expsym ${lib}'
- hardcode_direct=no
- hardcode_automatic=yes
- hardcode_shlibpath_var=unsupported
- whole_archive_flag_spec='-all_load $convenience'
- link_all_deplibs=yes
- else
- ld_shlibs=no
- fi
;;
esac
echo "$as_me:$LINENO: result: $enable_shared" >&5
@@ -9579,7 +9715,7 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -9590,11 +9726,11 @@
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e s/^X//"
+Xsed="$SED -e 1s/^X//"
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# The names of the tagged configurations supported by this script.
available_tags=
@@ -9624,7 +9760,13 @@
# The host system.
host_alias=$host_alias
host=$host
+host_os=$host_os
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
# An echo program that does not interpret backslashes.
echo=$lt_echo
@@ -9700,7 +9842,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
@@ -9995,7 +10137,9 @@
case $tagname in
CXX)
- if test -n "$CXX" && test "X$CXX" != "Xno"; then
+ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
ac_ext=cc
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -10032,7 +10176,7 @@
compiler_lib_search_path_CXX=
# Source file extension for C++ test sources.
-ac_ext=cc
+ac_ext=cpp
# Object file extension for compiled C++ test sources.
objext=o
@@ -10053,6 +10197,20 @@
compiler=$CC
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_LD=$LD
@@ -10074,8 +10232,17 @@
CC=${CXX-"c++"}
compiler=$CC
compiler_CXX=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
# We don't want -fno-exception wen compiling C++ code, so set the
# no_builtin_flag separately
if test "$GXX" = yes; then
@@ -10145,7 +10312,7 @@
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
+ # but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
@@ -10179,7 +10346,7 @@
if test "${lt_cv_prog_gnu_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
@@ -10288,7 +10455,7 @@
link_all_deplibs_CXX=yes
if test "$GXX" = yes; then
- case $host_os in aix4.012|aix4.012.*)
+ case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
@@ -10309,6 +10476,9 @@
fi
esac
shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
else
# not using gcc
if test "$host_cpu" = ia64; then
@@ -10454,7 +10624,7 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_CXX=' '
archive_cmds_need_lc_CXX=yes
- # This is similar to how AIX traditionally builds it's shared libraries.
+ # This is similar to how AIX traditionally builds its shared libraries.
archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname
$libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols
${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@@ -10468,6 +10638,7 @@
esac
;;
+
cygwin* | mingw* | pw32*)
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
# as there is no search path for DLLs.
@@ -10491,65 +10662,76 @@
ld_shlibs_CXX=no
fi
;;
+ darwin* | rhapsody*)
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined
${wl}suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[012])
+ allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined
${wl}suppress'
+ ;;
+ 10.*)
+ allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ archive_cmds_need_lc_CXX=no
+ hardcode_direct_CXX=no
+ hardcode_automatic_CXX=yes
+ hardcode_shlibpath_var_CXX=unsupported
+ whole_archive_flag_spec_CXX=''
+ link_all_deplibs_CXX=yes
- darwin* | rhapsody*)
- if test "$GXX" = yes; then
- archive_cmds_need_lc_CXX=no
- case "$host_os" in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_CXX='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_CXX='-flat_namespace -undefined suppress'
+ if test "$GXX" = yes ; then
+ lt_int_apple_cc_single_mod=no
+ output_verbose_link_cmd='echo'
+ if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+ lt_int_apple_cc_single_mod=yes
+ fi
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+ archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname
$verstring'
else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_CXX='-flat_namespace -undefined suppress'
- ;;
- 10.*)
- allow_undefined_flag_CXX='-undefined dynamic_lookup'
- ;;
- esac
+ archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o
${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib
${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname
$verstring'
+ fi
+ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs
$deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it
doesn't exist in older darwin lds
+ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
+ else
+ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib
-o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib
${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname
$verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+ case $cc_basename in
+ xlc*)
+ output_verbose_link_cmd='echo'
+ archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags
${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs
$deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it
doesn't exist in older darwin lds
+ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags
${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+ *)
+ ld_shlibs_CXX=no
+ ;;
+ esac
fi
- ;;
- esac
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname
$verstring'
- else
- archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs
-nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o
$lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname
$verstring'
- fi
- module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
+ ;;
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
- else
- archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- hardcode_direct_CXX=no
- hardcode_automatic_CXX=yes
- hardcode_shlibpath_var_CXX=unsupported
- whole_archive_flag_spec_CXX='-all_load $convenience'
- link_all_deplibs_CXX=yes
- else
- ld_shlibs_CXX=no
- fi
- ;;
-
dgux*)
case $cc_basename in
- ec++)
+ ec++*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
- ghcx)
+ ghcx*)
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
@@ -10560,14 +10742,14 @@
;;
esac
;;
- freebsd12*)
+ freebsd[12]*)
# C++ shared libraries reported to be fairly broken before switch to ELF
ld_shlibs_CXX=no
;;
freebsd-elf*)
archive_cmds_need_lc_CXX=no
;;
- freebsd* | kfreebsd*-gnu)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
ld_shlibs_CXX=yes
@@ -10584,11 +10766,11 @@
# location of the library.
case $cc_basename in
- CC)
+ CC*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
- aCC)
+ aCC*)
archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b
${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib ||
mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
@@ -10598,7 +10780,7 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext
2>&1) | grep "-L"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext
2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
;;
*)
if test "$GXX" = yes; then
@@ -10612,7 +10794,7 @@
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*)
hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
@@ -10628,7 +10810,7 @@
;;
esac
fi
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*)
hardcode_direct_CXX=no
hardcode_shlibpath_var_CXX=no
@@ -10649,12 +10831,12 @@
esac
case $cc_basename in
- CC)
+ CC*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
- aCC)
- case "$host_cpu" in
+ aCC*)
+ case $host_cpu in
hppa*64*|ia64*)
archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs
$deplibs'
;;
@@ -10675,7 +10857,7 @@
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
- case "$host_cpu" in
+ case $host_cpu in
ia64*|hppa*64*)
archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags
$libobjs $deplibs'
;;
@@ -10693,9 +10875,9 @@
;;
irix5* | irix6*)
case $cc_basename in
- CC)
+ CC*)
# SGI C++
- archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring"
&& echo -set_version $verstring` -update_registry ${objdir}/so_locations -o
$lib'
+ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring"
&& echo -set_version $verstring` -update_registry ${output_objdir}/so_locations
-o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -10706,7 +10888,7 @@
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
- archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n
"$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n
"$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry
${wl}${output_objdir}/so_locations -o $lib'
else
archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n
"$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
fi
@@ -10719,7 +10901,7 @@
;;
linux*)
case $cc_basename in
- KCC)
+ KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
@@ -10744,17 +10926,41 @@
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
;;
- icpc)
+ icpc*)
# Intel C++
with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname
${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file
$wl$export_symbols -o $lib'
+ ;;
+ esac
archive_cmds_need_lc_CXX=no
- archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-soname $wl$soname
${wl}-retain-symbols-file $wl$export_symbols -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience
${wl}--no-whole-archive'
;;
- cxx)
+ pgCC*)
+ # Portland Group C++ compiler
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname
${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ ;;
+ cxx*)
# Compaq C++
archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib
${wl}-retain-symbols-file $wl$export_symbols'
@@ -10785,7 +10991,7 @@
;;
mvs*)
case $cc_basename in
- cxx)
+ cxx*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
@@ -10806,9 +11012,25 @@
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 |
grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ ld_shlibs_CXX=no
+ ;;
+ openbsd*)
+ hardcode_direct_CXX=yes
+ hardcode_shlibpath_var_CXX=no
+ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags -o $lib'
+ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs
$deplibs $postdep_objects $compiler_flags
${wl}-retain-symbols-file,$export_symbols -o $lib'
+ export_dynamic_flag_spec_CXX='${wl}-E'
+ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience
'"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd='echo'
+ ;;
osf3*)
case $cc_basename in
- KCC)
+ KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
@@ -10824,14 +11046,14 @@
old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
;;
- RCC)
+ RCC*)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
- cxx)
+ cxx*)
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test
-n "$verstring" && echo ${wl}-set_version $verstring` -update_registry
${objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test
-n "$verstring" && echo ${wl}-set_version $verstring` -update_registry
${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
@@ -10849,7 +11071,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring`
${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname
${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring`
${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
@@ -10868,7 +11090,7 @@
;;
osf4* | osf5*)
case $cc_basename in
- KCC)
+ KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
@@ -10883,17 +11105,17 @@
# the KAI C++ compiler.
old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
;;
- RCC)
+ RCC*)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
- cxx)
+ cxx*)
allow_undefined_flag_CXX=' -expect_unresolved \*'
- archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test
-n "$verstring" && echo -set_version $verstring` -update_registry
${objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects
$libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test
-n "$verstring" && echo -set_version $verstring` -update_registry
${output_objdir}/so_locations -o $lib'
archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s
%s\\n" -exported_symbol "\$i" >> $lib.exp; done~
echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp
`test -n "$verstring" && echo -set_version $verstring` -update_registry
$objdir/so_locations -o $lib~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp
`test -n "$verstring" && echo -set_version $verstring` -update_registry
${output_objdir}/so_locations -o $lib~
$rm $lib.exp'
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
@@ -10912,7 +11134,7 @@
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym
${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version
${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag}
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym
${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version
${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o
$lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
@@ -10936,7 +11158,7 @@
sco*)
archive_cmds_need_lc_CXX=no
case $cc_basename in
- CC)
+ CC*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
@@ -10948,12 +11170,12 @@
;;
sunos4*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.x
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
- lcc)
+ lcc*)
# Lucid
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
@@ -10966,36 +11188,33 @@
;;
solaris*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.2, 5.x and Centerline C++
+ archive_cmds_need_lc_CXX=yes
no_undefined_flag_CXX=' -zdefs'
- archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o
$lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o
$lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm
$lib.exp'
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib
$predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
hardcode_libdir_flag_spec_CXX='-R$libdir'
hardcode_shlibpath_var_CXX=no
case $host_os in
- solaris2.0-5 | solaris2.0-5.*) ;;
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
# The C++ compiler is used as linker so we must use $wl
# flag to pass the commands to the underlying system
- # linker.
+ # linker. We must also pass each convience library through
+ # to the system linker between allextract/defaultextract.
+ # The C++ compiler will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience
${wl}-z ${wl}defaultextract'
+ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}-z ${wl}defaultextract'
;;
esac
link_all_deplibs_CXX=yes
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext
2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in
conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac;
done; echo $list'
+ output_verbose_link_cmd='echo'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
@@ -11003,7 +11222,7 @@
# in the archive.
old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
;;
- gcx)
+ gcx*)
# Green Hills C++ Compiler
archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs
$postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
@@ -11046,7 +11265,7 @@
;;
tandem*)
case $cc_basename in
- NCC)
+ NCC*)
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
@@ -11099,7 +11318,7 @@
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e
\"$no_glob_subst\"`"
+ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e
"$no_glob_subst"`
for p in `eval $output_verbose_link_cmd`; do
case $p in
@@ -11175,6 +11394,20 @@
$rm -f confest.$objext
+# PORTME: override above test on systems where it is broken
+case $host_os in
+solaris*)
+ case $cc_basename in
+ CC*)
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ postdeps_CXX='-lCstd -lCrun'
+ ;;
+ esac
+esac
+
+
case " $postdeps_CXX " in
*" -lc "*) archive_cmds_need_lc_CXX=no ;;
esac
@@ -11230,7 +11463,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
;;
*)
@@ -11255,18 +11488,28 @@
;;
chorus*)
case $cc_basename in
- cxch68)
+ cxch68*)
# Green Hills C++ Compiler
# _LT_AC_TAGVAR(lt_prog_compiler_static,
CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r
$COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
;;
esac
;;
+ darwin*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ case $cc_basename in
+ xlc*)
+ lt_prog_compiler_pic_CXX='-qnocommon'
+ lt_prog_compiler_wl_CXX='-Wl,'
+ ;;
+ esac
+ ;;
dgux*)
case $cc_basename in
- ec++)
+ ec++*)
lt_prog_compiler_pic_CXX='-KPIC'
;;
- ghcx)
+ ghcx*)
# Green Hills C++ Compiler
lt_prog_compiler_pic_CXX='-pic'
;;
@@ -11274,22 +11517,22 @@
;;
esac
;;
- freebsd* | kfreebsd*-gnu)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
case $cc_basename in
- CC)
+ CC*)
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a
${ac_cv_prog_cc_wl}archive"
if test "$host_cpu" != ia64; then
lt_prog_compiler_pic_CXX='+Z'
fi
;;
- aCC)
+ aCC*)
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a
${ac_cv_prog_cc_wl}archive"
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -11304,7 +11547,7 @@
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
- CC)
+ CC*)
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX='-non_shared'
# CC pic flag -KPIC is the default.
@@ -11315,18 +11558,24 @@
;;
linux*)
case $cc_basename in
- KCC)
+ KCC*)
# KAI C++ Compiler
lt_prog_compiler_wl_CXX='--backend -Wl,'
lt_prog_compiler_pic_CXX='-fPIC'
;;
- icpc)
+ icpc* | ecpc*)
# Intel C++
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_pic_CXX='-KPIC'
lt_prog_compiler_static_CXX='-static'
;;
- cxx)
+ pgCC*)
+ # Portland Group C++ compiler.
+ lt_prog_compiler_wl_CXX='-Wl,'
+ lt_prog_compiler_pic_CXX='-fpic'
+ lt_prog_compiler_static_CXX='-Bstatic'
+ ;;
+ cxx*)
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
@@ -11343,7 +11592,7 @@
;;
mvs*)
case $cc_basename in
- cxx)
+ cxx*)
lt_prog_compiler_pic_CXX='-W c,exportall'
;;
*)
@@ -11354,14 +11603,14 @@
;;
osf3* | osf4* | osf5*)
case $cc_basename in
- KCC)
+ KCC*)
lt_prog_compiler_wl_CXX='--backend -Wl,'
;;
- RCC)
+ RCC*)
# Rational C++ 2.4.1
lt_prog_compiler_pic_CXX='-pic'
;;
- cxx)
+ cxx*)
# Digital/Compaq C++
lt_prog_compiler_wl_CXX='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
@@ -11377,7 +11626,7 @@
;;
sco*)
case $cc_basename in
- CC)
+ CC*)
lt_prog_compiler_pic_CXX='-fPIC'
;;
*)
@@ -11386,13 +11635,13 @@
;;
solaris*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.2, 5.x and Centerline C++
lt_prog_compiler_pic_CXX='-KPIC'
lt_prog_compiler_static_CXX='-Bstatic'
lt_prog_compiler_wl_CXX='-Qoption ld '
;;
- gcx)
+ gcx*)
# Green Hills C++ Compiler
lt_prog_compiler_pic_CXX='-PIC'
;;
@@ -11402,12 +11651,12 @@
;;
sunos4*)
case $cc_basename in
- CC)
+ CC*)
# Sun C++ 4.x
lt_prog_compiler_pic_CXX='-pic'
lt_prog_compiler_static_CXX='-Bstatic'
;;
- lcc)
+ lcc*)
# Lucid
lt_prog_compiler_pic_CXX='-pic'
;;
@@ -11417,7 +11666,7 @@
;;
tandem*)
case $cc_basename in
- NCC)
+ NCC*)
# NonStop-UX NCC 3.20
lt_prog_compiler_pic_CXX='-KPIC'
;;
@@ -11458,18 +11707,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:11464: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:11713: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:11468: \$? = $ac_status" >&5
+ echo "$as_me:11717: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test ! -s conftest.err; then
+ # So say no if there are warnings other than the usual output.
+ $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null;
then
lt_prog_compiler_pic_works_CXX=yes
fi
fi
@@ -11490,7 +11741,7 @@
fi
fi
-case "$host_os" in
+case $host_os in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_CXX=
@@ -11518,23 +11769,25 @@
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:11524: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:11775: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:11528: \$? = $ac_status" >&5
+ echo "$as_me:11779: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- if test ! -s out/conftest.err; then
+ $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp
+ $SED '/^$/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2
>/dev/null; then
lt_cv_prog_compiler_c_o_CXX=yes
fi
fi
- chmod u+w .
+ chmod u+w . 2>&5
$rm conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
@@ -11589,7 +11842,7 @@
export_symbols_cmds_CXX="$ltdll_cmds"
;;
cygwin* | mingw*)
- export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe |
$SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.*
//'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe |
$SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^
]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq >
$export_symbols'
;;
linux*)
link_all_deplibs_CXX=no
@@ -11772,7 +12025,7 @@
shlibpath_var=LIBRARY_PATH
;;
-bsdi4*)
+bsdi[45]*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -11800,7 +12053,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo
\$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname'
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
@@ -11830,7 +12084,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
;;
@@ -11853,7 +12107,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n"
"$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep
"^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR,
,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -11888,8 +12142,17 @@
dynamic_linker='GNU ld.so'
;;
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
@@ -11907,7 +12170,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
- freebsd3.01* | freebsdelf3.01*)
+ freebsd3.[01]* | freebsdelf3.[01]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -11934,7 +12197,7 @@
version_type=sunos
need_lib_prefix=no
need_version=no
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
@@ -12033,7 +12296,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf |
tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2));
skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e
's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -12108,7 +12371,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
- need_version=yes
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
@@ -12230,8 +12497,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C"
>&6
hardcode_action_CXX=
if test -n "$hardcode_libdir_flag_spec_CXX" || \
- test -n "$runpath_var CXX" || \
- test "X$hardcode_automatic_CXX"="Xyes" ; then
+ test -n "$runpath_var_CXX" || \
+ test "X$hardcode_automatic_CXX" = "Xyes" ; then
# We can hardcode non-existant directories.
if test "$hardcode_direct_CXX" != no &&
@@ -12890,7 +13157,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 12893 "configure"
+#line 13160 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12956,7 +13223,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
+ (./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
@@ -12988,7 +13255,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 12991 "configure"
+#line 13258 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13054,7 +13321,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
+ (./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
@@ -13206,7 +13473,13 @@
# The host system.
host_alias=$host_alias
host=$host
+host_os=$host_os
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
# An echo program that does not interpret backslashes.
echo=$lt_echo
@@ -13282,7 +13555,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
@@ -13563,13 +13836,36 @@
compiler=$CC
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${F77-"f77"}
compiler=$CC
compiler_F77=$CC
-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
echo "$as_me:$LINENO: result: $can_build_shared" >&5
@@ -13581,7 +13877,7 @@
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
-case "$host_os" in
+case $host_os in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
@@ -13590,7 +13886,9 @@
fi
;;
aix4* | aix5*)
- test "$enable_shared" = yes && enable_static=no
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
;;
esac
echo "$as_me:$LINENO: result: $enable_shared" >&5
@@ -13667,7 +13965,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -13693,6 +13991,16 @@
lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
fi
;;
+ darwin*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ case $cc_basename in
+ xlc*)
+ lt_prog_compiler_pic_F77='-qnocommon'
+ lt_prog_compiler_wl_F77='-Wl,'
+ ;;
+ esac
+ ;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
@@ -13704,7 +14012,7 @@
lt_prog_compiler_wl_F77='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -13728,12 +14036,19 @@
;;
linux*)
- case $CC in
+ case $cc_basename in
icc* | ecc*)
lt_prog_compiler_wl_F77='-Wl,'
lt_prog_compiler_pic_F77='-KPIC'
lt_prog_compiler_static_F77='-static'
;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl_F77='-Wl,'
+ lt_prog_compiler_pic_F77='-fpic'
+ lt_prog_compiler_static_F77='-Bstatic'
+ ;;
ccc*)
lt_prog_compiler_wl_F77='-Wl,'
# All Alpha code is PIC.
@@ -13754,9 +14069,14 @@
;;
solaris*)
- lt_prog_compiler_wl_F77='-Wl,'
lt_prog_compiler_pic_F77='-KPIC'
lt_prog_compiler_static_F77='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl_F77='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl_F77='-Wl,';;
+ esac
;;
sunos4*)
@@ -13778,6 +14098,11 @@
fi
;;
+ unicos*)
+ lt_prog_compiler_wl_F77='-Wl,'
+ lt_prog_compiler_can_build_shared_F77=no
+ ;;
+
uts4*)
lt_prog_compiler_pic_F77='-pic'
lt_prog_compiler_static_F77='-Bstatic'
@@ -13812,18 +14137,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:13818: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:14143: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:13822: \$? = $ac_status" >&5
+ echo "$as_me:14147: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test ! -s conftest.err; then
+ # So say no if there are warnings other than the usual output.
+ $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null;
then
lt_prog_compiler_pic_works_F77=yes
fi
fi
@@ -13844,7 +14171,7 @@
fi
fi
-case "$host_os" in
+case $host_os in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_F77=
@@ -13872,23 +14199,25 @@
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:13878: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:14205: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:13882: \$? = $ac_status" >&5
+ echo "$as_me:14209: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- if test ! -s out/conftest.err; then
+ $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp
+ $SED '/^$/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2
>/dev/null; then
lt_cv_prog_compiler_c_o_F77=yes
fi
fi
- chmod u+w .
+ chmod u+w . 2>&5
$rm conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
@@ -13964,6 +14293,16 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
+ # Just being paranoid about ensuring that cc_basename is set.
+ for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
case $host_os in
cygwin* | mingw* | pw32*)
@@ -13984,6 +14323,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience
'"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec_F77=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>/dev/null` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
@@ -14034,7 +14394,7 @@
allow_undefined_flag_F77=unsupported
always_export_symbols_F77=no
enable_shared_with_static_runtimes_F77=yes
- export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe
| $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW]
/s/.* //'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe
| $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW]
/s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o
$output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
@@ -14048,10 +14408,42 @@
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs
$compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000
${wl}--out-implib,$lib'
else
- ld_shlibs=no
+ ld_shlibs_F77=no
fi
;;
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ tmp_addflag=
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ esac
+ archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test $supports_anon_versioning = yes; then
+ archive_expsym_cmds_F77='$echo "{ global:" >
$output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ $echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver
-o $lib'
+ fi
+ link_all_deplibs_F77=no
+ else
+ ld_shlibs_F77=no
+ fi
+ ;;
+
netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o
$lib'
@@ -14090,32 +14482,6 @@
hardcode_shlibpath_var_F77=no
;;
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname -o $lib'
- archive_cmds_F77="$tmp_archive_cmds"
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_F77='$echo "{ global:" >
$output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname
${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- else
- archive_expsym_cmds_F77="$tmp_archive_cmds"
- fi
- link_all_deplibs_F77=no
- else
- ld_shlibs_F77=no
- fi
- ;;
-
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname -o $lib'
@@ -14126,16 +14492,11 @@
;;
esac
- if test "$ld_shlibs_F77" = yes; then
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_F77='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience
'"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_F77=
- fi
+ if test "$ld_shlibs_F77" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec_F77=
+ export_dynamic_flag_spec_F77=
+ whole_archive_flag_spec_F77=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
@@ -14199,7 +14560,7 @@
link_all_deplibs_F77=yes
if test "$GCC" = yes; then
- case $host_os in aix4.012|aix4.012.*)
+ case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
@@ -14220,6 +14581,9 @@
fi
esac
shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
else
# not using gcc
if test "$host_cpu" = ia64; then
@@ -14344,7 +14708,7 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_F77=' '
archive_cmds_need_lc_F77=yes
- # This is similar to how AIX traditionally builds it's shared
libraries.
+ # This is similar to how AIX traditionally builds its shared
libraries.
archive_expsym_cmds_F77="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags
${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@@ -14358,7 +14722,7 @@
ld_shlibs_F77=no
;;
- bsdi4*)
+ bsdi[45]*)
export_dynamic_flag_spec_F77=-rdynamic
;;
@@ -14379,57 +14743,57 @@
old_archive_From_new_cmds_F77='true'
# FIXME: Should let the user specify the lib program.
old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
+ fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
enable_shared_with_static_runtimes_F77=yes
;;
darwin* | rhapsody*)
- if test "$GXX" = yes ; then
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined
${wl}suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[012])
+ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined
${wl}suppress'
+ ;;
+ 10.*)
+ allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
archive_cmds_need_lc_F77=no
- case "$host_os" in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_F77='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_F77='-flat_namespace -undefined suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_F77='-flat_namespace -undefined suppress'
- ;;
- 10.*)
- allow_undefined_flag_F77='-undefined dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_cmds_F77='$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring'
- else
- archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs
-nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o
$lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname
$verstring'
- fi
- module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
- else
- archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
hardcode_direct_F77=no
hardcode_automatic_F77=yes
hardcode_shlibpath_var_F77=unsupported
- whole_archive_flag_spec_F77='-all_load $convenience'
+ whole_archive_flag_spec_F77=''
link_all_deplibs_F77=yes
+ if test "$GCC" = yes ; then
+ output_verbose_link_cmd='echo'
+ archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib
$libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs
$deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin lds
+ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname
$verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
else
- ld_shlibs_F77=no
+ case $cc_basename in
+ xlc*)
+ output_verbose_link_cmd='echo'
+ archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib
$libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname`
$verstring'
+ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs
$deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it
doesn't exist in older darwin lds
+ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name
${wl}$rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+ *)
+ ld_shlibs_F77=no
+ ;;
+ esac
fi
;;
@@ -14463,7 +14827,7 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | kfreebsd*-gnu)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec_F77='-R$libdir'
hardcode_direct_F77=yes
@@ -14488,7 +14852,7 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs
$deplibs $compiler_flags'
;;
@@ -14497,7 +14861,7 @@
;;
esac
else
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs
$linker_flags'
;;
@@ -14507,7 +14871,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*)
hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_F77='+b $libdir'
@@ -14574,6 +14938,7 @@
hardcode_shlibpath_var_F77=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs
$compiler_flags'
+ archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs
$deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
export_dynamic_flag_spec_F77='${wl}-E'
else
@@ -14619,7 +14984,7 @@
allow_undefined_flag_F77=' -expect_unresolved \*'
archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs
$linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s
%s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec_F77='-rpath $libdir'
@@ -14638,10 +15003,12 @@
solaris*)
no_undefined_flag_F77=' -z text'
if test "$GCC" = yes; then
+ wlarc='${wl}'
archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs
$deplibs $compiler_flags'
archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
$CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib
$libobjs $deplibs $compiler_flags~$rm $lib.exp'
else
+ wlarc=''
archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib
$libobjs $deplibs $linker_flags'
archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs
$deplibs $linker_flags~$rm $lib.exp'
@@ -14650,8 +15017,18 @@
hardcode_shlibpath_var_F77=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec_F77='-z allextract$convenience -z
defaultextract' ;;
+ *)
+ # The compiler driver will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl, iff we do not link with $LD.
+ # Luckily, gcc supports the same syntax we need for Sun Studio.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ case $wlarc in
+ '')
+ whole_archive_flag_spec_F77='-z allextract$convenience -z
defaultextract' ;;
+ *)
+ whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}-z ${wl}defaultextract' ;;
+ esac ;;
esac
link_all_deplibs_F77=yes
;;
@@ -14925,7 +15302,7 @@
shlibpath_var=LIBRARY_PATH
;;
-bsdi4*)
+bsdi[45]*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -14953,7 +15330,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo
\$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname'
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
@@ -14983,7 +15361,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
;;
@@ -15006,7 +15384,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n"
"$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep
"^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR,
,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -15041,8 +15419,17 @@
dynamic_linker='GNU ld.so'
;;
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
@@ -15060,7 +15447,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
- freebsd3.01* | freebsdelf3.01*)
+ freebsd3.[01]* | freebsdelf3.[01]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -15087,7 +15474,7 @@
version_type=sunos
need_lib_prefix=no
need_version=no
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
@@ -15186,7 +15573,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf |
tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2));
skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e
's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -15261,7 +15648,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
- need_version=yes
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
@@ -15383,8 +15774,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C"
>&6
hardcode_action_F77=
if test -n "$hardcode_libdir_flag_spec_F77" || \
- test -n "$runpath_var F77" || \
- test "X$hardcode_automatic_F77"="Xyes" ; then
+ test -n "$runpath_var_F77" || \
+ test "X$hardcode_automatic_F77" = "Xyes" ; then
# We can hardcode non-existant directories.
if test "$hardcode_direct_F77" != no &&
@@ -15561,7 +15952,13 @@
# The host system.
host_alias=$host_alias
host=$host
+host_os=$host_os
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
# An echo program that does not interpret backslashes.
echo=$lt_echo
@@ -15637,7 +16034,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
@@ -15875,7 +16272,7 @@
lt_simple_compile_test_code="class foo {}\n"
# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void
main(String argv) {}; }\n'
+lt_simple_link_test_code='public class conftest { public static void
main(String[] argv) {}; }\n'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
@@ -15886,16 +16283,42 @@
compiler=$CC
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${GCJ-"gcj"}
compiler=$CC
compiler_GCJ=$CC
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
# GCJ did not exist at the time GCC didn't implicitly link libc in.
archive_cmds_need_lc_GCJ=no
+old_archive_cmds_GCJ=$old_archive_cmds
+
lt_prog_compiler_no_builtin_flag_GCJ=
if test "$GCC" = yes; then
@@ -15917,18 +16340,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:15923: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16346: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:15927: \$? = $ac_status" >&5
+ echo "$as_me:16350: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test ! -s conftest.err; then
+ # So say no if there are warnings other than the usual output.
+ $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null;
then
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
@@ -16005,7 +16430,7 @@
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -16031,6 +16456,16 @@
lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
fi
;;
+ darwin*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ case $cc_basename in
+ xlc*)
+ lt_prog_compiler_pic_GCJ='-qnocommon'
+ lt_prog_compiler_wl_GCJ='-Wl,'
+ ;;
+ esac
+ ;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
@@ -16042,7 +16477,7 @@
lt_prog_compiler_wl_GCJ='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
# +Z the default
;;
@@ -16066,12 +16501,19 @@
;;
linux*)
- case $CC in
+ case $cc_basename in
icc* | ecc*)
lt_prog_compiler_wl_GCJ='-Wl,'
lt_prog_compiler_pic_GCJ='-KPIC'
lt_prog_compiler_static_GCJ='-static'
;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl_GCJ='-Wl,'
+ lt_prog_compiler_pic_GCJ='-fpic'
+ lt_prog_compiler_static_GCJ='-Bstatic'
+ ;;
ccc*)
lt_prog_compiler_wl_GCJ='-Wl,'
# All Alpha code is PIC.
@@ -16092,9 +16534,14 @@
;;
solaris*)
- lt_prog_compiler_wl_GCJ='-Wl,'
lt_prog_compiler_pic_GCJ='-KPIC'
lt_prog_compiler_static_GCJ='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl_GCJ='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl_GCJ='-Wl,';;
+ esac
;;
sunos4*)
@@ -16116,6 +16563,11 @@
fi
;;
+ unicos*)
+ lt_prog_compiler_wl_GCJ='-Wl,'
+ lt_prog_compiler_can_build_shared_GCJ=no
+ ;;
+
uts4*)
lt_prog_compiler_pic_GCJ='-pic'
lt_prog_compiler_static_GCJ='-Bstatic'
@@ -16150,18 +16602,20 @@
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16156: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16608: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16160: \$? = $ac_status" >&5
+ echo "$as_me:16612: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test ! -s conftest.err; then
+ # So say no if there are warnings other than the usual output.
+ $echo "X$_lt_compiler_boilerplate" | $Xsed >conftest.exp
+ $SED '/^$/d' conftest.err >conftest.er2
+ if test ! -s conftest.err || diff conftest.exp conftest.er2 >/dev/null;
then
lt_prog_compiler_pic_works_GCJ=yes
fi
fi
@@ -16182,7 +16636,7 @@
fi
fi
-case "$host_os" in
+case $host_os in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_GCJ=
@@ -16210,23 +16664,25 @@
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16216: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16670: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:16220: \$? = $ac_status" >&5
+ echo "$as_me:16674: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
- if test ! -s out/conftest.err; then
+ $echo "X$_lt_compiler_boilerplate" | $Xsed > out/conftest.exp
+ $SED '/^$/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.err || diff out/conftest.exp out/conftest.er2
>/dev/null; then
lt_cv_prog_compiler_c_o_GCJ=yes
fi
fi
- chmod u+w .
+ chmod u+w . 2>&5
$rm conftest*
# SGI C++ compiler will create directory out/ii_files/ for
# template instantiation
@@ -16302,6 +16758,16 @@
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
+ # Just being paranoid about ensuring that cc_basename is set.
+ for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
case $host_os in
cygwin* | mingw* | pw32*)
@@ -16322,6 +16788,27 @@
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience
'"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec_GCJ=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>/dev/null` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
@@ -16372,7 +16859,7 @@
allow_undefined_flag_GCJ=unsupported
always_export_symbols_GCJ=no
enable_shared_with_static_runtimes_GCJ=yes
- export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe
| $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW]
/s/.* //'\'' | sort | uniq > $export_symbols'
+ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe
| $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW]
/s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o
$output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
@@ -16386,10 +16873,42 @@
fi~
$CC -shared $output_objdir/$soname.def $libobjs $deplibs
$compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000
${wl}--out-implib,$lib'
else
- ld_shlibs=no
+ ld_shlibs_GCJ=no
fi
;;
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ tmp_addflag=
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ esac
+ archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs
$compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test $supports_anon_versioning = yes; then
+ archive_expsym_cmds_GCJ='$echo "{ global:" >
$output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ $echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver
-o $lib'
+ fi
+ link_all_deplibs_GCJ=no
+ else
+ ld_shlibs_GCJ=no
+ fi
+ ;;
+
netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o
$lib'
@@ -16428,32 +16947,6 @@
hardcode_shlibpath_var_GCJ=no
;;
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname -o $lib'
- archive_cmds_GCJ="$tmp_archive_cmds"
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
- if test $supports_anon_versioning = yes; then
- archive_expsym_cmds_GCJ='$echo "{ global:" >
$output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname
${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- else
- archive_expsym_cmds_GCJ="$tmp_archive_cmds"
- fi
- link_all_deplibs_GCJ=no
- else
- ld_shlibs_GCJ=no
- fi
- ;;
-
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags
${wl}-soname $wl$soname -o $lib'
@@ -16464,16 +16957,11 @@
;;
esac
- if test "$ld_shlibs_GCJ" = yes; then
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
- export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience
'"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec_GCJ=
- fi
+ if test "$ld_shlibs_GCJ" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec_GCJ=
+ export_dynamic_flag_spec_GCJ=
+ whole_archive_flag_spec_GCJ=
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
@@ -16537,7 +17025,7 @@
link_all_deplibs_GCJ=yes
if test "$GCC" = yes; then
- case $host_os in aix4.012|aix4.012.*)
+ case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
@@ -16558,6 +17046,9 @@
fi
esac
shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
else
# not using gcc
if test "$host_cpu" = ia64; then
@@ -16702,7 +17193,7 @@
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_GCJ=' '
archive_cmds_need_lc_GCJ=yes
- # This is similar to how AIX traditionally builds it's shared
libraries.
+ # This is similar to how AIX traditionally builds its shared
libraries.
archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o
$output_objdir/$soname $libobjs $deplibs $compiler_flags
${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS
$output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
@@ -16716,7 +17207,7 @@
ld_shlibs_GCJ=no
;;
- bsdi4*)
+ bsdi[45]*)
export_dynamic_flag_spec_GCJ=-rdynamic
;;
@@ -16737,57 +17228,57 @@
old_archive_From_new_cmds_GCJ='true'
# FIXME: Should let the user specify the lib program.
old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
- fix_srcfile_path='`cygpath -w "$srcfile"`'
+ fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
enable_shared_with_static_runtimes_GCJ=yes
;;
darwin* | rhapsody*)
- if test "$GXX" = yes ; then
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined
${wl}suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[012])
+ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined
${wl}suppress'
+ ;;
+ 10.*)
+ allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
archive_cmds_need_lc_GCJ=no
- case "$host_os" in
- rhapsody* | darwin1.[012])
- allow_undefined_flag_GCJ='-undefined suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- allow_undefined_flag_GCJ='-flat_namespace -undefined suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[012])
- allow_undefined_flag_GCJ='-flat_namespace -undefined suppress'
- ;;
- 10.*)
- allow_undefined_flag_GCJ='-undefined dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- lt_int_apple_cc_single_mod=no
- output_verbose_link_cmd='echo'
- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
- lt_int_apple_cc_single_mod=yes
- fi
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_cmds_GCJ='$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring'
- else
- archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs
-nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o
$lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname
$verstring'
- fi
- module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin ld's
- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module
$allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name
$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym
${lib}'
- else
- archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load
-keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib
$allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags
-install_name $rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
hardcode_direct_GCJ=no
hardcode_automatic_GCJ=yes
hardcode_shlibpath_var_GCJ=unsupported
- whole_archive_flag_spec_GCJ='-all_load $convenience'
+ whole_archive_flag_spec_GCJ=''
link_all_deplibs_GCJ=yes
+ if test "$GCC" = yes ; then
+ output_verbose_link_cmd='echo'
+ archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib
$libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs
$deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't
exist in older darwin lds
+ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname
$verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
else
- ld_shlibs_GCJ=no
+ case $cc_basename in
+ xlc*)
+ output_verbose_link_cmd='echo'
+ archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib
$libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname`
$verstring'
+ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs
$deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it
doesn't exist in older darwin lds
+ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag
-o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name
${wl}$rpath/$soname $verstring~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e
"s,^\(..*\),_&," < $export_symbols >
$output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib
-bundle $libobjs $deplibs$compiler_flags~nmedit -s
$output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+ *)
+ ld_shlibs_GCJ=no
+ ;;
+ esac
fi
;;
@@ -16821,7 +17312,7 @@
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | kfreebsd*-gnu)
+ freebsd* | kfreebsd*-gnu | dragonfly*)
archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
hardcode_libdir_flag_spec_GCJ='-R$libdir'
hardcode_direct_GCJ=yes
@@ -16846,7 +17337,7 @@
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs
$deplibs $compiler_flags'
;;
@@ -16855,7 +17346,7 @@
;;
esac
else
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*|ia64*)
archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs
$linker_flags'
;;
@@ -16865,7 +17356,7 @@
esac
fi
if test "$with_gnu_ld" = no; then
- case "$host_cpu" in
+ case $host_cpu in
hppa*64*)
hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
@@ -16932,6 +17423,7 @@
hardcode_shlibpath_var_GCJ=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test
"$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs
$compiler_flags'
+ archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs
$deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
export_dynamic_flag_spec_GCJ='${wl}-E'
else
@@ -16977,7 +17469,7 @@
allow_undefined_flag_GCJ=' -expect_unresolved \*'
archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs
$linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s
%s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags
$libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version
$verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
@@ -16996,10 +17488,12 @@
solaris*)
no_undefined_flag_GCJ=' -z text'
if test "$GCC" = yes; then
+ wlarc='${wl}'
archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs
$deplibs $compiler_flags'
archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
$CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib
$libobjs $deplibs $compiler_flags~$rm $lib.exp'
else
+ wlarc=''
archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib
$libobjs $deplibs $linker_flags'
archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat
$export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >>
$lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs
$deplibs $linker_flags~$rm $lib.exp'
@@ -17008,8 +17502,18 @@
hardcode_shlibpath_var_GCJ=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
- *) # Supported since Solaris 2.6 (maybe 2.5.1?)
- whole_archive_flag_spec_GCJ='-z allextract$convenience -z
defaultextract' ;;
+ *)
+ # The compiler driver will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl, iff we do not link with $LD.
+ # Luckily, gcc supports the same syntax we need for Sun Studio.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ case $wlarc in
+ '')
+ whole_archive_flag_spec_GCJ='-z allextract$convenience -z
defaultextract' ;;
+ *)
+ whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in
$convenience\"\"; do test -n \"$conv\" &&
new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"`
${wl}-z ${wl}defaultextract' ;;
+ esac ;;
esac
link_all_deplibs_GCJ=yes
;;
@@ -17283,7 +17787,7 @@
shlibpath_var=LIBRARY_PATH
;;
-bsdi4*)
+bsdi[45]*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${release}${shared_ext}$major $libname${shared_ext}'
@@ -17311,7 +17815,8 @@
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo
\$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname'
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
@@ -17341,7 +17846,7 @@
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo
${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
;;
esac
;;
@@ -17364,7 +17869,7 @@
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n"
"$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep
"^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR,
,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
@@ -17399,8 +17904,17 @@
dynamic_linker='GNU ld.so'
;;
-freebsd*)
- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
@@ -17418,7 +17932,7 @@
freebsd2*)
shlibpath_overrides_runpath=yes
;;
- freebsd3.01* | freebsdelf3.01*)
+ freebsd3.[01]* | freebsdelf3.[01]*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
@@ -17445,7 +17959,7 @@
version_type=sunos
need_lib_prefix=no
need_version=no
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
shrext_cmds='.so'
hardcode_into_libs=yes
@@ -17544,7 +18058,7 @@
# Append ld.so.conf contents to the search path
if test -f /etc/ld.so.conf; then
- lt_ld_extra=`$SED -e 's/:,\t/ /g;s/=^=*$//;s/=^= * / /g' /etc/ld.so.conf |
tr '\n' ' '`
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2));
skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e
's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
fi
@@ -17619,7 +18133,11 @@
openbsd*)
version_type=sunos
need_lib_prefix=no
- need_version=yes
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
library_names_spec='${libname}${release}${shared_ext}$versuffix
${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
@@ -17741,8 +18259,8 @@
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C"
>&6
hardcode_action_GCJ=
if test -n "$hardcode_libdir_flag_spec_GCJ" || \
- test -n "$runpath_var GCJ" || \
- test "X$hardcode_automatic_GCJ"="Xyes" ; then
+ test -n "$runpath_var_GCJ" || \
+ test "X$hardcode_automatic_GCJ" = "Xyes" ; then
# We can hardcode non-existant directories.
if test "$hardcode_direct_GCJ" != no &&
@@ -18401,7 +18919,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 18404 "configure"
+#line 18922 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -18467,7 +18985,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
+ (./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
@@ -18499,7 +19017,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 18502 "configure"
+#line 19020 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -18565,7 +19083,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
+ (./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
@@ -18717,7 +19235,13 @@
# The host system.
host_alias=$host_alias
host=$host
+host_os=$host_os
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
# An echo program that does not interpret backslashes.
echo=$lt_echo
@@ -18793,7 +19317,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
@@ -19041,11 +19565,35 @@
compiler=$CC
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${RC-"windres"}
compiler=$CC
compiler_RC=$CC
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
lt_cv_prog_compiler_c_o_RC=yes
# The else clause should only fire when bootstrapping the
@@ -19162,7 +19710,13 @@
# The host system.
host_alias=$host_alias
host=$host
+host_os=$host_os
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
# An echo program that does not interpret backslashes.
echo=$lt_echo
@@ -19238,7 +19792,7 @@
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
-# Must we lock files when doing compilation ?
+# Must we lock files when doing compilation?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
@@ -20716,7 +21270,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 20719 "configure"
+#line 21273 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -20782,7 +21336,7 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) 2>/dev/null
+ (./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) libltdl_cv_need_uscore=no ;;
Modified: gnunet-gtk/libltdl/ltmain.sh
===================================================================
--- gnunet-gtk/libltdl/ltmain.sh 2005-12-23 23:20:32 UTC (rev 2397)
+++ gnunet-gtk/libltdl/ltmain.sh 2005-12-23 23:34:27 UTC (rev 2398)
@@ -1,7 +1,7 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <address@hidden>, 1996
#
@@ -17,7 +17,7 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -43,9 +43,14 @@
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.5.6
-TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42) Debian$Rev: 224 $"
+VERSION="1.5.20 Debian 1.5.20-2"
+TIMESTAMP=" (1.1220.2.287 2005/08/31 18:54:15)"
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
@@ -83,14 +88,15 @@
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
# test EBCDIC or ASCII
-case `echo A|tr A '\301'` in
- A) # EBCDIC based system
- SP2NL="tr '\100' '\n'"
- NL2SP="tr '\r\n' '\100\100'"
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ SP2NL='tr \040 \012'
+ NL2SP='tr \015\012 \040\040'
;;
- *) # Assume ASCII based system
- SP2NL="tr '\040' '\012'"
- NL2SP="tr '\015\012' '\040\040'"
+ *) # EBCDIC based system
+ SP2NL='tr \100 \n'
+ NL2SP='tr \r\n \100\100'
;;
esac
@@ -107,8 +113,9 @@
fi
# Make sure IFS has a sensible default
-: ${IFS="
-"}
+lt_nl='
+'
+IFS=" $lt_nl"
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
$echo "$modename: not configured to build any kind of library" 1>&2
@@ -138,7 +145,8 @@
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
-func_win32_libid () {
+func_win32_libid ()
+{
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
@@ -178,7 +186,8 @@
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
-func_infer_tag () {
+func_infer_tag ()
+{
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
@@ -235,6 +244,108 @@
esac
fi
}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+
+ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: ERROR: object name conflicts:
$f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+ exit $EXIT_FAILURE
+ fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+ my_status=""
+
+ $show "${rm}r $my_gentop"
+ $run ${rm}r "$my_gentop"
+ $show "$mkdir $my_gentop"
+ $run $mkdir "$my_gentop"
+ my_status=$?
+ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+ exit $my_status
+ fi
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+ my_xdir="$my_gentop/$my_xlib"
+
+ $show "${rm}r $my_xdir"
+ $run ${rm}r "$my_xdir"
+ $show "$mkdir $my_xdir"
+ $run $mkdir "$my_xdir"
+ status=$?
+ if test "$status" -ne 0 && test ! -d "$my_xdir"; then
+ exit $status
+ fi
+ case $host in
+ *-darwin*)
+ $show "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ if test -z "$run"; then
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP
Architectures 2>/dev/null`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ $show "$darwin_base_archive has multiple architectures
$darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ lipo -thin $darwin_arch -output
"unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
"${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $rm
"unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name
\*.lo -print| xargs basename | sort -u | $NL2SP`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ lipo -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ ${rm}r unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd "$darwin_orig_dir"
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ fi # $run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name
\*.lo -print | $NL2SP`
+ done
+ func_extract_archives_result="$my_oldobjs"
+}
# End of Shell function definitions
#####################################
@@ -305,10 +416,10 @@
--version)
$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
$echo
- $echo "Copyright (C) 2003 Free Software Foundation, Inc."
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
$echo "This is free software; see the source for copying conditions.
There is NO"
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE."
- exit $EXIT_SUCCESS
+ exit $?
;;
--config)
@@ -317,7 +428,7 @@
for tagname in $taglist; do
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END
LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
done
- exit $EXIT_SUCCESS
+ exit $?
;;
--debug)
@@ -342,7 +453,7 @@
else
$echo "disable static libraries"
fi
- exit $EXIT_SUCCESS
+ exit $?
;;
--finish) mode="finish" ;;
@@ -399,7 +510,7 @@
# Infer the operation mode.
if test -z "$mode"; then
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require -mode=MODE be
specified." 1>&2
+ $echo "*** Future versions of Libtool will require --mode=MODE be
specified." 1>&2
case $nonopt in
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
mode=link
@@ -465,7 +576,7 @@
for arg
do
- case "$arg_mode" in
+ case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
lastarg="$arg"
@@ -547,7 +658,10 @@
case $lastarg in
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
+ # in scan sets, and some SunOS ksh mistreat backslash-escaping
+ # in scan sets (worked around with variable expansion),
+ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
+ # at all, so we specify them separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
lastarg="\"$lastarg\""
;;
@@ -621,6 +735,14 @@
esac
done
+ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+ case $qlibobj in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qlibobj="\"$qlibobj\"" ;;
+ esac
+ test "X$libobj" != "X$qlibobj" \
+ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && $echo "$modename: libobj name \`$libobj' may not contain shell
special characters."
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$obj"; then
@@ -693,12 +815,17 @@
$run $rm $removelist
exit $EXIT_FAILURE
fi
- $echo $srcfile > "$lockfile"
+ $echo "$srcfile" > "$lockfile"
fi
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
+ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+ case $qsrcfile in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qsrcfile="\"$qsrcfile\"" ;;
+ esac
$run $rm "$libobj" "${libobj}T"
@@ -720,10 +847,10 @@
fbsd_hideous_sh_bug=$base_compile
if test "$pic_mode" != no; then
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
fi
if test ! -d "${xdir}$objdir"; then
@@ -803,9 +930,9 @@
if test "$build_old_libs" = yes; then
if test "$pic_mode" != yes; then
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
else
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
@@ -1227,6 +1354,13 @@
prev=
continue
;;
+ darwin_framework)
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ prev=
+ continue
+ ;;
*)
eval "$prev=\"\$arg\""
prev=
@@ -1285,6 +1419,14 @@
continue
;;
+ -framework|-arch)
+ prev=darwin_framework
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ continue
+ ;;
+
-inst-prefix-dir)
prev=inst_prefix
continue
@@ -1345,7 +1487,7 @@
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@@ -1356,7 +1498,7 @@
esac
elif test "X$arg" = "X-lc_r"; then
case $host in
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
@@ -1366,8 +1508,20 @@
continue
;;
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ -model)
+ compile_command="$compile_command $arg"
+ compiler_flags="$compiler_flags $arg"
+ finalize_command="$finalize_command $arg"
+ prev=xcompiler
+ continue
+ ;;
+
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- deplibs="$deplibs $arg"
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
continue
;;
@@ -1376,13 +1530,14 @@
continue
;;
- # gcc -m* arguments should be passed to the linker via $compiler_flags
- # in order to pass architecture information to the linker
- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
- # but this is not reliable with gcc because gcc may use -mfoo to
- # select a different linker, different libraries, etc, while
- # -Wl,-mfoo simply passes -mfoo to the linker.
- -m*)
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m* pass through architecture-specific compiler args for GCC
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
+
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
@@ -1858,7 +2013,7 @@
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- deplibs="$deplib $deplibs"
+ compiler_flags="$compiler_flags $deplib"
fi
continue
;;
@@ -1977,7 +2132,22 @@
fi
case $linkmode in
lib)
- if test "$deplibs_check_method" != pass_all; then
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ if eval $echo \"$deplib\" 2>/dev/null \
+ | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
$echo
$echo "*** Warning: Trying to link with static lib archive
$deplib."
$echo "*** I have the capability to make that library
automatically link in when"
@@ -2051,7 +2221,9 @@
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
+ avoidtemprpath=
+
# Read the .la file
case $lib in
*/* | *\\*) . $lib ;;
@@ -2149,11 +2321,19 @@
dir="$libdir"
absdir="$libdir"
fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ if test ! -f "$ladir/$objdir/$linklib" && test -f
"$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi
fi # $installed = yes
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
@@ -2226,12 +2406,12 @@
if test -n "$library_names" &&
{ test "$prefer_static_libs" = no || test -z "$old_library"; };
then
# We need to hardcode the library path
- if test -n "$shlibpath_var"; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
case "$temp_rpath " in
*" $dir "*) ;;
*" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
+ *) temp_rpath="$temp_rpath $absdir" ;;
esac
fi
@@ -2417,7 +2597,7 @@
add_dir="-L$dir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
@@ -2490,7 +2670,7 @@
add_dir="-L$libdir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
@@ -2551,8 +2731,6 @@
fi
fi
else
- convenience="$convenience $dir/$old_library"
- old_convenience="$old_convenience $dir/$old_library"
deplibs="$dir/$old_library $deplibs"
link_static=yes
fi
@@ -2670,13 +2848,13 @@
*) continue ;;
esac
case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ case " $deplibs " in
*" $depdepl "*) ;;
*) deplibs="$depdepl $deplibs" ;;
esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$deplibs $path" ;;
- esac
done
fi # link_all_deplibs != no
fi # linkmode = lib
@@ -2947,7 +3125,7 @@
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
*)
- $echo "$modename: CURRENT \`$current' is not a nonnegative integer"
1>&2
+ $echo "$modename: CURRENT \`$current' must be a nonnegative integer"
1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
@@ -2956,7 +3134,7 @@
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
*)
- $echo "$modename: REVISION \`$revision' is not a nonnegative integer"
1>&2
+ $echo "$modename: REVISION \`$revision' must be a nonnegative
integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
@@ -2965,7 +3143,7 @@
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
*)
- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
@@ -2991,7 +3169,7 @@
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
- verstring="-compatibility_version $minor_current -current_version
$minor_current.$revision"
+ verstring="${wl}-compatibility_version ${wl}$minor_current
${wl}-current_version ${wl}$minor_current.$revision"
;;
freebsd-aout)
@@ -3197,7 +3375,7 @@
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@@ -3247,7 +3425,7 @@
if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" -ne "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
@@ -3284,7 +3462,7 @@
# Error occurred in the first compile. Let's try to salvage
# the situation: Compile a separate program for each library.
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
@@ -3336,7 +3514,7 @@
set dummy $deplibs_check_method
file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
@@ -3405,7 +3583,7 @@
set dummy $deplibs_check_method
match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test -n "$name" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
@@ -3646,6 +3824,9 @@
# The command line is too long to execute in one step.
$show "using reloadable object file for export list..."
skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
fi
done
IFS="$save_ifs"
@@ -3679,67 +3860,13 @@
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we
will no
- # longer touch any unique names. It is faster to leave these
extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming
object files" 1>&2
- $echo "$modename: warning: to ensure that they will not
overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name'
'$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv
'$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name
\*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ libobjs="$libobjs $func_extract_archives_result"
fi
fi
-
+
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
linker_flags="$linker_flags $flag"
@@ -3769,7 +3896,8 @@
fi
fi
- if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+ if test "X$skipped_export" != "X:" &&
+ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
@@ -3788,6 +3916,7 @@
save_libobjs=$libobjs
fi
save_output=$output
+ output_la=`$echo "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
@@ -3797,13 +3926,13 @@
delfiles=
last_robj=
k=1
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
eval test_cmds=\"$reload_cmds $objlist $last_robj\"
if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*"` &&
+ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; }; then
objlist="$objlist $obj"
else
@@ -3817,9 +3946,9 @@
# the last one created.
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist
$last_robj\"
fi
- last_robj=$output_objdir/$save_output-${k}.$objext
+ last_robj=$output_objdir/$output_la-${k}.$objext
k=`expr $k + 1`
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
len=1
fi
@@ -3839,13 +3968,13 @@
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
fi
- # Set up a command to remove the reloadale object files
+ # Set up a command to remove the reloadable object files
# after they are used.
i=0
while test "$i" -lt "$k"
do
i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
done
$echo "creating a temporary reloadable object file: $output"
@@ -3893,13 +4022,30 @@
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv
${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname
${realname}T && $mv "$realname"U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ fi
+ fi
+
exit $EXIT_SUCCESS
fi
@@ -3977,64 +4123,10 @@
eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${obj}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will
no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object
files" 1>&2
- $echo "$modename: warning: to ensure that they will not
overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name'
'$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv
'$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print
-o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
@@ -4296,12 +4388,12 @@
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$output.exp"
+ export_symbols="$output_objdir/$outputname.exp"
$run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @address@hidden/d' -e 's/^.*
\(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.*
\(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
else
- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e
's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" >
"$nlist"T'
+ $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e
's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" >
"$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
fi
fi
@@ -4353,7 +4445,26 @@
#endif
/* The mapping between symbol names and symbols. */
+"
+
+ case $host in
+ *cygwin* | *mingw* )
+ $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs */
+struct {
+"
+ ;;
+ * )
+ $echo >> "$output_objdir/$dlsyms" "\
const struct {
+"
+ ;;
+ esac
+
+
+ $echo >> "$output_objdir/$dlsyms" "\
const char *name;
lt_ptr address;
}
@@ -4582,7 +4693,7 @@
esac
case $host in
*cygwin* | *mingw* )
- cwrappersource=`$echo ${objdir}/lt-${output}.c`
+ cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
cwrapper=`$echo ${output}.exe`
$rm $cwrappersource $cwrapper
trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
@@ -4681,6 +4792,7 @@
EOF
cat >> $cwrappersource <<"EOF"
+ return 127;
}
void *
@@ -4815,7 +4927,7 @@
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
relink_command=\"$relink_command\"
@@ -4944,13 +5056,13 @@
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2*)
$echo >> $output "\
- exec \$progdir\\\\\$program \${1+\"address@hidden"}
+ exec \"\$progdir\\\\\$program\" \${1+\"address@hidden"}
"
;;
*)
$echo >> $output "\
- exec \$progdir/\$program \${1+\"address@hidden"}
+ exec \"\$progdir/\$program\" \${1+\"address@hidden"}
"
;;
esac
@@ -4960,7 +5072,7 @@
fi
else
# The program doesn't exist.
- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$echo \"This script is just a wrapper for \$program.\" 1>&2
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit $EXIT_FAILURE
@@ -4992,71 +5104,73 @@
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- # Add in members from convenience archives.
- for xlib in $addlibs; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object
files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite"
1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name'
'$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name'
'$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name
\*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $addlibs
+ oldobjs="$oldobjs $func_extract_archives_result"
fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" =
yes; then
cmds=$old_archive_from_new_cmds
else
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ $echo "X$obj" | $Xsed -e 's%^.*/%%'
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "copying selected object files to avoid basename conflicts..."
+
+ if test -z "$gentop"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
+ status=$?
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
+ exit $status
+ fi
+ fi
+
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ counter=`expr $counter + 1`
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ $run ln "$obj" "$gentop/$newobj" ||
+ $run cp "$obj" "$gentop/$newobj"
+ oldobjs="$oldobjs $gentop/$newobj"
+ ;;
+ *) oldobjs="$oldobjs $obj" ;;
+ esac
+ done
+ fi
+
eval cmds=\"$old_archive_cmds\"
if len=`expr "X$cmds" : ".*"` &&
@@ -5070,20 +5184,7 @@
objlist=
concat_cmds=
save_oldobjs=$oldobjs
- # GNU ar 2.10+ was changed to match POSIX; thus no paths are
- # encoded into archives. This makes 'ar r' malfunction in
- # this piecewise linking case whenever conflicting object
- # names appear in distinct ar calls; check, warn and compensate.
- if (for obj in $save_oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; overriding
AR_FLAGS to 'cq'" 1>&2
- $echo "$modename: warning: to ensure that POSIX-compatible ar will
work" 1>&2
- AR_FLAGS=cq
- fi
+
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
@@ -5094,7 +5195,7 @@
oldobjs="$objlist $obj"
objlist="$objlist $obj"
eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*"` &&
+ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; then
:
else
@@ -5291,11 +5392,11 @@
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+ $echo "X$nonopt" | grep shtool > /dev/null; then
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5304,14 +5405,14 @@
shift
else
install_prog=
- arg="$nonopt"
+ arg=$nonopt
fi
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5329,28 +5430,31 @@
do
if test -n "$dest"; then
files="$files $dest"
- dest="$arg"
+ dest=$arg
continue
fi
case $arg in
-d) isdir=yes ;;
- -f) prev="-f" ;;
- -g) prev="-g" ;;
- -m) prev="-m" ;;
- -o) prev="-o" ;;
+ -f)
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
+ ;;
+ -g | -m | -o) prev=$arg ;;
-s)
stripme=" -s"
continue
;;
- -*) ;;
-
+ -*)
+ ;;
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
prev=
else
- dest="$arg"
+ dest=$arg
continue
fi
;;
@@ -5359,7 +5463,7 @@
# Aesthetically quote the argument.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5528,11 +5632,14 @@
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
for linkname
do
if test "$linkname" != "$realname"; then
- $show "(cd $destdir && $rm $linkname && $LN_S $realname
$linkname)"
- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname
$linkname)"
+ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm
$linkname && $LN_S $realname $linkname; }; })"
+ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || {
$rm $linkname && $LN_S $realname $linkname; }; })"
fi
done
fi
@@ -5545,7 +5652,16 @@
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv
${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
fi
@@ -5639,17 +5755,15 @@
notinst_deplibs=
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
# Check the variables that should have been set.
@@ -5677,17 +5791,15 @@
done
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
outputname=
@@ -5728,7 +5840,7 @@
fi
# remove .exe since cygwin /usr/bin/install will append another
- # one anyways
+ # one anyway
case $install_prog,$host in
*/usr/bin/install*,*cygwin*)
case $file:$destfile in
@@ -6398,7 +6510,7 @@
$echo
$echo "Try \`$modename --help' for more information about other modes."
-exit $EXIT_SUCCESS
+exit $?
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
Modified: gnunet-gtk/ltmain.sh
===================================================================
--- gnunet-gtk/ltmain.sh 2005-12-23 23:20:32 UTC (rev 2397)
+++ gnunet-gtk/ltmain.sh 2005-12-23 23:34:27 UTC (rev 2398)
@@ -1,7 +1,7 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <address@hidden>, 1996
#
@@ -17,7 +17,7 @@
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -43,9 +43,14 @@
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.5.6
-TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42) Debian$Rev: 224 $"
+VERSION="1.5.20 Debian 1.5.20-2"
+TIMESTAMP=" (1.1220.2.287 2005/08/31 18:54:15)"
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
@@ -83,14 +88,15 @@
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
# test EBCDIC or ASCII
-case `echo A|tr A '\301'` in
- A) # EBCDIC based system
- SP2NL="tr '\100' '\n'"
- NL2SP="tr '\r\n' '\100\100'"
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ SP2NL='tr \040 \012'
+ NL2SP='tr \015\012 \040\040'
;;
- *) # Assume ASCII based system
- SP2NL="tr '\040' '\012'"
- NL2SP="tr '\015\012' '\040\040'"
+ *) # EBCDIC based system
+ SP2NL='tr \100 \n'
+ NL2SP='tr \r\n \100\100'
;;
esac
@@ -107,8 +113,9 @@
fi
# Make sure IFS has a sensible default
-: ${IFS="
-"}
+lt_nl='
+'
+IFS=" $lt_nl"
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
$echo "$modename: not configured to build any kind of library" 1>&2
@@ -138,7 +145,8 @@
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
-func_win32_libid () {
+func_win32_libid ()
+{
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
@@ -178,7 +186,8 @@
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
-func_infer_tag () {
+func_infer_tag ()
+{
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
@@ -235,6 +244,108 @@
esac
fi
}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+
+ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: ERROR: object name conflicts:
$f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+ exit $EXIT_FAILURE
+ fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+ my_status=""
+
+ $show "${rm}r $my_gentop"
+ $run ${rm}r "$my_gentop"
+ $show "$mkdir $my_gentop"
+ $run $mkdir "$my_gentop"
+ my_status=$?
+ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+ exit $my_status
+ fi
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+ my_xdir="$my_gentop/$my_xlib"
+
+ $show "${rm}r $my_xdir"
+ $run ${rm}r "$my_xdir"
+ $show "$mkdir $my_xdir"
+ $run $mkdir "$my_xdir"
+ status=$?
+ if test "$status" -ne 0 && test ! -d "$my_xdir"; then
+ exit $status
+ fi
+ case $host in
+ *-darwin*)
+ $show "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ if test -z "$run"; then
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP
Architectures 2>/dev/null`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ $show "$darwin_base_archive has multiple architectures
$darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ lipo -thin $darwin_arch -output
"unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
"${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $rm
"unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name
\*.lo -print| xargs basename | sort -u | $NL2SP`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ lipo -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ ${rm}r unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd "$darwin_orig_dir"
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ fi # $run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name
\*.lo -print | $NL2SP`
+ done
+ func_extract_archives_result="$my_oldobjs"
+}
# End of Shell function definitions
#####################################
@@ -305,10 +416,10 @@
--version)
$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
$echo
- $echo "Copyright (C) 2003 Free Software Foundation, Inc."
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
$echo "This is free software; see the source for copying conditions.
There is NO"
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE."
- exit $EXIT_SUCCESS
+ exit $?
;;
--config)
@@ -317,7 +428,7 @@
for tagname in $taglist; do
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END
LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
done
- exit $EXIT_SUCCESS
+ exit $?
;;
--debug)
@@ -342,7 +453,7 @@
else
$echo "disable static libraries"
fi
- exit $EXIT_SUCCESS
+ exit $?
;;
--finish) mode="finish" ;;
@@ -399,7 +510,7 @@
# Infer the operation mode.
if test -z "$mode"; then
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require -mode=MODE be
specified." 1>&2
+ $echo "*** Future versions of Libtool will require --mode=MODE be
specified." 1>&2
case $nonopt in
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
mode=link
@@ -465,7 +576,7 @@
for arg
do
- case "$arg_mode" in
+ case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
lastarg="$arg"
@@ -547,7 +658,10 @@
case $lastarg in
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
+ # in scan sets, and some SunOS ksh mistreat backslash-escaping
+ # in scan sets (worked around with variable expansion),
+ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
+ # at all, so we specify them separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
lastarg="\"$lastarg\""
;;
@@ -621,6 +735,14 @@
esac
done
+ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+ case $qlibobj in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qlibobj="\"$qlibobj\"" ;;
+ esac
+ test "X$libobj" != "X$qlibobj" \
+ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && $echo "$modename: libobj name \`$libobj' may not contain shell
special characters."
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$obj"; then
@@ -693,12 +815,17 @@
$run $rm $removelist
exit $EXIT_FAILURE
fi
- $echo $srcfile > "$lockfile"
+ $echo "$srcfile" > "$lockfile"
fi
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
+ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+ case $qsrcfile in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qsrcfile="\"$qsrcfile\"" ;;
+ esac
$run $rm "$libobj" "${libobj}T"
@@ -720,10 +847,10 @@
fbsd_hideous_sh_bug=$base_compile
if test "$pic_mode" != no; then
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
fi
if test ! -d "${xdir}$objdir"; then
@@ -803,9 +930,9 @@
if test "$build_old_libs" = yes; then
if test "$pic_mode" != yes; then
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
else
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
@@ -1227,6 +1354,13 @@
prev=
continue
;;
+ darwin_framework)
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ prev=
+ continue
+ ;;
*)
eval "$prev=\"\$arg\""
prev=
@@ -1285,6 +1419,14 @@
continue
;;
+ -framework|-arch)
+ prev=darwin_framework
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ continue
+ ;;
+
-inst-prefix-dir)
prev=inst_prefix
continue
@@ -1345,7 +1487,7 @@
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@@ -1356,7 +1498,7 @@
esac
elif test "X$arg" = "X-lc_r"; then
case $host in
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
@@ -1366,8 +1508,20 @@
continue
;;
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ -model)
+ compile_command="$compile_command $arg"
+ compiler_flags="$compiler_flags $arg"
+ finalize_command="$finalize_command $arg"
+ prev=xcompiler
+ continue
+ ;;
+
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- deplibs="$deplibs $arg"
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
continue
;;
@@ -1376,13 +1530,14 @@
continue
;;
- # gcc -m* arguments should be passed to the linker via $compiler_flags
- # in order to pass architecture information to the linker
- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
- # but this is not reliable with gcc because gcc may use -mfoo to
- # select a different linker, different libraries, etc, while
- # -Wl,-mfoo simply passes -mfoo to the linker.
- -m*)
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m* pass through architecture-specific compiler args for GCC
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
+
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
@@ -1858,7 +2013,7 @@
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- deplibs="$deplib $deplibs"
+ compiler_flags="$compiler_flags $deplib"
fi
continue
;;
@@ -1977,7 +2132,22 @@
fi
case $linkmode in
lib)
- if test "$deplibs_check_method" != pass_all; then
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ if eval $echo \"$deplib\" 2>/dev/null \
+ | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
$echo
$echo "*** Warning: Trying to link with static lib archive
$deplib."
$echo "*** I have the capability to make that library
automatically link in when"
@@ -2051,7 +2221,9 @@
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
+ avoidtemprpath=
+
# Read the .la file
case $lib in
*/* | *\\*) . $lib ;;
@@ -2149,11 +2321,19 @@
dir="$libdir"
absdir="$libdir"
fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ if test ! -f "$ladir/$objdir/$linklib" && test -f
"$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi
fi # $installed = yes
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
@@ -2226,12 +2406,12 @@
if test -n "$library_names" &&
{ test "$prefer_static_libs" = no || test -z "$old_library"; };
then
# We need to hardcode the library path
- if test -n "$shlibpath_var"; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
case "$temp_rpath " in
*" $dir "*) ;;
*" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
+ *) temp_rpath="$temp_rpath $absdir" ;;
esac
fi
@@ -2417,7 +2597,7 @@
add_dir="-L$dir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
@@ -2490,7 +2670,7 @@
add_dir="-L$libdir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
@@ -2551,8 +2731,6 @@
fi
fi
else
- convenience="$convenience $dir/$old_library"
- old_convenience="$old_convenience $dir/$old_library"
deplibs="$dir/$old_library $deplibs"
link_static=yes
fi
@@ -2670,13 +2848,13 @@
*) continue ;;
esac
case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ case " $deplibs " in
*" $depdepl "*) ;;
*) deplibs="$depdepl $deplibs" ;;
esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$deplibs $path" ;;
- esac
done
fi # link_all_deplibs != no
fi # linkmode = lib
@@ -2947,7 +3125,7 @@
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
*)
- $echo "$modename: CURRENT \`$current' is not a nonnegative integer"
1>&2
+ $echo "$modename: CURRENT \`$current' must be a nonnegative integer"
1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
@@ -2956,7 +3134,7 @@
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
*)
- $echo "$modename: REVISION \`$revision' is not a nonnegative integer"
1>&2
+ $echo "$modename: REVISION \`$revision' must be a nonnegative
integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
@@ -2965,7 +3143,7 @@
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9])
;;
*)
- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
@@ -2991,7 +3169,7 @@
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
- verstring="-compatibility_version $minor_current -current_version
$minor_current.$revision"
+ verstring="${wl}-compatibility_version ${wl}$minor_current
${wl}-current_version ${wl}$minor_current.$revision"
;;
freebsd-aout)
@@ -3197,7 +3375,7 @@
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@@ -3247,7 +3425,7 @@
if test "$?" -eq 0 ; then
ldd_output=`ldd conftest`
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" -ne "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
@@ -3284,7 +3462,7 @@
# Error occurred in the first compile. Let's try to salvage
# the situation: Compile a separate program for each library.
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
@@ -3336,7 +3514,7 @@
set dummy $deplibs_check_method
file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
@@ -3405,7 +3583,7 @@
set dummy $deplibs_check_method
match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test -n "$name" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ;
then
@@ -3646,6 +3824,9 @@
# The command line is too long to execute in one step.
$show "using reloadable object file for export list..."
skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
fi
done
IFS="$save_ifs"
@@ -3679,67 +3860,13 @@
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we
will no
- # longer touch any unique names. It is faster to leave these
extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming
object files" 1>&2
- $echo "$modename: warning: to ensure that they will not
overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name'
'$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv
'$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name
\*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ libobjs="$libobjs $func_extract_archives_result"
fi
fi
-
+
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
linker_flags="$linker_flags $flag"
@@ -3769,7 +3896,8 @@
fi
fi
- if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+ if test "X$skipped_export" != "X:" &&
+ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
@@ -3788,6 +3916,7 @@
save_libobjs=$libobjs
fi
save_output=$output
+ output_la=`$echo "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
@@ -3797,13 +3926,13 @@
delfiles=
last_robj=
k=1
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
eval test_cmds=\"$reload_cmds $objlist $last_robj\"
if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*"` &&
+ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; }; then
objlist="$objlist $obj"
else
@@ -3817,9 +3946,9 @@
# the last one created.
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist
$last_robj\"
fi
- last_robj=$output_objdir/$save_output-${k}.$objext
+ last_robj=$output_objdir/$output_la-${k}.$objext
k=`expr $k + 1`
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
len=1
fi
@@ -3839,13 +3968,13 @@
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
fi
- # Set up a command to remove the reloadale object files
+ # Set up a command to remove the reloadable object files
# after they are used.
i=0
while test "$i" -lt "$k"
do
i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
done
$echo "creating a temporary reloadable object file: $output"
@@ -3893,13 +4022,30 @@
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv
${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname
${realname}T && $mv "$realname"U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ fi
+ fi
+
exit $EXIT_SUCCESS
fi
@@ -3977,64 +4123,10 @@
eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${obj}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will
no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object
files" 1>&2
- $echo "$modename: warning: to ensure that they will not
overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name'
'$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv
'$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print
-o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
@@ -4296,12 +4388,12 @@
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$output.exp"
+ export_symbols="$output_objdir/$outputname.exp"
$run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @address@hidden/d' -e 's/^.*
\(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.*
\(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
else
- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e
's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" >
"$nlist"T'
+ $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e
's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" >
"$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
fi
fi
@@ -4353,7 +4445,26 @@
#endif
/* The mapping between symbol names and symbols. */
+"
+
+ case $host in
+ *cygwin* | *mingw* )
+ $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs */
+struct {
+"
+ ;;
+ * )
+ $echo >> "$output_objdir/$dlsyms" "\
const struct {
+"
+ ;;
+ esac
+
+
+ $echo >> "$output_objdir/$dlsyms" "\
const char *name;
lt_ptr address;
}
@@ -4582,7 +4693,7 @@
esac
case $host in
*cygwin* | *mingw* )
- cwrappersource=`$echo ${objdir}/lt-${output}.c`
+ cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
cwrapper=`$echo ${output}.exe`
$rm $cwrappersource $cwrapper
trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
@@ -4681,6 +4792,7 @@
EOF
cat >> $cwrappersource <<"EOF"
+ return 127;
}
void *
@@ -4815,7 +4927,7 @@
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
relink_command=\"$relink_command\"
@@ -4944,13 +5056,13 @@
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2*)
$echo >> $output "\
- exec \$progdir\\\\\$program \${1+\"address@hidden"}
+ exec \"\$progdir\\\\\$program\" \${1+\"address@hidden"}
"
;;
*)
$echo >> $output "\
- exec \$progdir/\$program \${1+\"address@hidden"}
+ exec \"\$progdir/\$program\" \${1+\"address@hidden"}
"
;;
esac
@@ -4960,7 +5072,7 @@
fi
else
# The program doesn't exist.
- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$echo \"This script is just a wrapper for \$program.\" 1>&2
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit $EXIT_FAILURE
@@ -4992,71 +5104,73 @@
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- # Add in members from convenience archives.
- for xlib in $addlibs; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object
files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite"
1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name'
'$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name'
'$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name
\*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $addlibs
+ oldobjs="$oldobjs $func_extract_archives_result"
fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" =
yes; then
cmds=$old_archive_from_new_cmds
else
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ $echo "X$obj" | $Xsed -e 's%^.*/%%'
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "copying selected object files to avoid basename conflicts..."
+
+ if test -z "$gentop"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
+ status=$?
+ if test "$status" -ne 0 && test ! -d "$gentop"; then
+ exit $status
+ fi
+ fi
+
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ counter=`expr $counter + 1`
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ $run ln "$obj" "$gentop/$newobj" ||
+ $run cp "$obj" "$gentop/$newobj"
+ oldobjs="$oldobjs $gentop/$newobj"
+ ;;
+ *) oldobjs="$oldobjs $obj" ;;
+ esac
+ done
+ fi
+
eval cmds=\"$old_archive_cmds\"
if len=`expr "X$cmds" : ".*"` &&
@@ -5070,20 +5184,7 @@
objlist=
concat_cmds=
save_oldobjs=$oldobjs
- # GNU ar 2.10+ was changed to match POSIX; thus no paths are
- # encoded into archives. This makes 'ar r' malfunction in
- # this piecewise linking case whenever conflicting object
- # names appear in distinct ar calls; check, warn and compensate.
- if (for obj in $save_oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; overriding
AR_FLAGS to 'cq'" 1>&2
- $echo "$modename: warning: to ensure that POSIX-compatible ar will
work" 1>&2
- AR_FLAGS=cq
- fi
+
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
@@ -5094,7 +5195,7 @@
oldobjs="$objlist $obj"
objlist="$objlist $obj"
eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*"` &&
+ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; then
:
else
@@ -5291,11 +5392,11 @@
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+ $echo "X$nonopt" | grep shtool > /dev/null; then
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5304,14 +5405,14 @@
shift
else
install_prog=
- arg="$nonopt"
+ arg=$nonopt
fi
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5329,28 +5430,31 @@
do
if test -n "$dest"; then
files="$files $dest"
- dest="$arg"
+ dest=$arg
continue
fi
case $arg in
-d) isdir=yes ;;
- -f) prev="-f" ;;
- -g) prev="-g" ;;
- -m) prev="-m" ;;
- -o) prev="-o" ;;
+ -f)
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
+ ;;
+ -g | -m | -o) prev=$arg ;;
-s)
stripme=" -s"
continue
;;
- -*) ;;
-
+ -*)
+ ;;
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
prev=
else
- dest="$arg"
+ dest=$arg
continue
fi
;;
@@ -5359,7 +5463,7 @@
# Aesthetically quote the argument.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
@@ -5528,11 +5632,14 @@
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
for linkname
do
if test "$linkname" != "$realname"; then
- $show "(cd $destdir && $rm $linkname && $LN_S $realname
$linkname)"
- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname
$linkname)"
+ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm
$linkname && $LN_S $realname $linkname; }; })"
+ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || {
$rm $linkname && $LN_S $realname $linkname; }; })"
fi
done
fi
@@ -5545,7 +5652,16 @@
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv
${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
fi
@@ -5639,17 +5755,15 @@
notinst_deplibs=
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
# Check the variables that should have been set.
@@ -5677,17 +5791,15 @@
done
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
outputname=
@@ -5728,7 +5840,7 @@
fi
# remove .exe since cygwin /usr/bin/install will append another
- # one anyways
+ # one anyway
case $install_prog,$host in
*/usr/bin/install*,*cygwin*)
case $file:$destfile in
@@ -6398,7 +6510,7 @@
$echo
$echo "Try \`$modename --help' for more information about other modes."
-exit $EXIT_SUCCESS
+exit $?
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
Modified: gnunet-gtk/po/Makefile.in
===================================================================
--- gnunet-gtk/po/Makefile.in 2005-12-23 23:20:32 UTC (rev 2397)
+++ gnunet-gtk/po/Makefile.in 2005-12-23 23:34:27 UTC (rev 2398)
@@ -11,7 +11,7 @@
# Origin: gettext-0.13
PACKAGE = gnunet-gtk
-VERSION = 0.7.0a
+VERSION = 0.7.0b
SHELL = /bin/sh
Modified: gnunet-gtk/src/plugins/fs/namespace.c
===================================================================
--- gnunet-gtk/src/plugins/fs/namespace.c 2005-12-23 23:20:32 UTC (rev
2397)
+++ gnunet-gtk/src/plugins/fs/namespace.c 2005-12-23 23:34:27 UTC (rev
2398)
@@ -225,7 +225,7 @@
else {
char *dotdot;
- while(dotdot = strstr(filename, ".."))
+ while ( NULL != (dotdot = strstr(filename, "..")))
dotdot[0] = dotdot[1] = '_';
}
@@ -341,7 +341,7 @@
else {
char *dotdot;
- while(dotdot = strstr(filename, ".."))
+ while (NULL != (dotdot = strstr(filename, "..")))
dotdot[0] = dotdot[1] = '_';
}
desc = ECRS_getFirstFromMetaData(fi->meta,
Modified: gnunet-gtk/src/plugins/fs/search.c
===================================================================
--- gnunet-gtk/src/plugins/fs/search.c 2005-12-23 23:20:32 UTC (rev 2397)
+++ gnunet-gtk/src/plugins/fs/search.c 2005-12-23 23:34:27 UTC (rev 2398)
@@ -102,7 +102,7 @@
else {
char *dotdot;
- while(dotdot = strstr(name, ".."))
+ while (NULL != (dotdot = strstr(name, "..")))
dotdot[0] = dotdot[1] = '_';
}
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r2398 - in gnunet-gtk: . libltdl po src/plugins/fs,
grothoff <=