[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[taler-docs] branch master updated (34b28de -> b3c9b6d)
From: |
gnunet |
Subject: |
[taler-docs] branch master updated (34b28de -> b3c9b6d) |
Date: |
Wed, 02 Dec 2020 23:01:47 +0100 |
This is an automated email from the git hooks/post-receive script.
ttn pushed a change to branch master
in repository docs.
from 34b28de Merge branch 'master' of git+ssh://git.taler.net/docs
new b86cafc don't say "from Git" for GNU Taler exchange
new 9ffaa5e set minimum required version for GNU Taler exchange to 0.8.0
new 9e34e94 remove package from list of dependencies: Autoconf, Automake,
Libtool, Autopoint, Libltdl
new 02f330b rework instructions not start from "unpack tarball", not "git
clone" (three instances)
new 8b32118 suggest grabbing merchant tarball while in taler download dir
new b3c9b6d mark up ‘libgnunetutil’
The 6 revisions listed above as "new" are entirely new to this
repository and will be described in separate emails. The revisions
listed as "add" were already present in the repository and have only
been added to this reference.
Summary of changes:
taler-merchant-manual.rst | 39 ++++++++++++++-------------------------
1 file changed, 14 insertions(+), 25 deletions(-)
diff --git a/taler-merchant-manual.rst b/taler-merchant-manual.rst
index a49b916..428af0b 100644
--- a/taler-merchant-manual.rst
+++ b/taler-merchant-manual.rst
@@ -283,16 +283,6 @@ Installation of dependencies
The following packages need to be installed before we can compile the
backend:
-- autoconf >= 2.69
-
-- automake >= 1.14
-
-- libtool >= 2.4
-
-- autopoint >= 0.19
-
-- libltdl >= 2.4
-
- libunistring >= 0.9.3
- libcurl >= 7.26 (or libgnurl >= 7.26)
@@ -315,15 +305,20 @@ backend:
- GNUnet >= 0.14.0
-- GNU Taler exchange (from Git or see `release announcement
<https://mail.gnu.org/archive/cgi-bin/namazu.cgi?query=taler&idxname=info-gnu&max=20&result=normal&sort=date:late>`__)
+- GNU Taler exchange >= 0.8.0 (see `release announcement
<https://mail.gnu.org/archive/cgi-bin/namazu.cgi?query=taler&idxname=info-gnu&max=20&result=normal&sort=date:late>`__)
Except for the last two, these are available in most GNU/Linux distributions
and should just be installed using the respective package manager. Be careful
with GNU libmicrohttpd; here, some distributions only include an older version
that will not work.
+While you are in the GNU Taler exchange
+`download directory <http://ftpmirror.gnu.org/taler/>`__,
+you might as well also download the tarball for GNU Taler merchant >= 0.8.0
+(the version number should match that of the GNU Taler exchange).
+
The following sections will provide detailed instructions for installing
-the libgnunetutil and GNU Taler exchange dependencies.
+the ``libgnunetutil`` and GNU Taler exchange dependencies.
.. _Installing-libgnunetutil:
@@ -336,13 +331,11 @@ Before you install GNUnet, you must download and install
the dependencies
mentioned in the previous section, otherwise the build may succeed, but could
fail to export some of the tooling required by GNU Taler.
-To download and install GNUnet, proceed as follows:
+To download and install GNUnet, unpack the tarball and change
+into the resulting directory, then proceed as follows:
::
- $ git clone https://git.gnunet.org/gnunet/
- $ cd gnunet/
- $ ./bootstrap
$ ./configure [--prefix=GNUNETPFX]
$ # Each dependency can be fetched from non standard locations via
$ # the '--with-<LIBNAME>' option. See './configure --help'.
@@ -364,14 +357,11 @@ Installing the GNU Taler exchange
.. index:: exchange
-After installing GNUnet, you can download and install the exchange as
-follows:
+After installing GNUnet, unpack the GNU Taler exchange tarball,
+change into the resulting directory, and proceed as follows:
::
- $ git clone https://git.taler.net/exchange.git/
- $ cd exchange
- $ ./bootstrap
$ ./configure [--prefix=EXCHANGEPFX] \
[--with-gnunet=GNUNETPFX]
$ # Each dependency can be fetched from non standard locations via
@@ -398,13 +388,12 @@ Installing the GNU Taler merchant backend
The following steps assume all dependencies are installed.
-Use the following commands to download and install the merchant backend:
+First, unpack the GNU Taler merchant tarball and change into
+the resulting directory.
+Then, use the following commands to build and install the merchant backend:
::
- $ git clone https://git.taler.net/merchant/
- $ cd merchant
- $ ./bootstrap
$ ./configure [--prefix=PFX] \
[--with-gnunet=GNUNETPFX] \
[--with-exchange=EXCHANGEPFX]
--
To stop receiving notification emails like this one, please contact
gnunet@gnunet.org.
- [taler-docs] branch master updated (34b28de -> b3c9b6d),
gnunet <=
- [taler-docs] 06/06: mark up ‘libgnunetutil’, gnunet, 2020/12/02
- [taler-docs] 04/06: rework instructions not start from "unpack tarball", not "git clone" (three instances), gnunet, 2020/12/02
- [taler-docs] 02/06: set minimum required version for GNU Taler exchange to 0.8.0, gnunet, 2020/12/02
- [taler-docs] 01/06: don't say "from Git" for GNU Taler exchange, gnunet, 2020/12/02
- [taler-docs] 03/06: remove package from list of dependencies: Autoconf, Automake, Libtool, Autopoint, Libltdl, gnunet, 2020/12/02
- [taler-docs] 05/06: suggest grabbing merchant tarball while in taler download dir, gnunet, 2020/12/02