[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[taler-deployment] branch master updated: -more deployment git cleanups
From: |
gnunet |
Subject: |
[taler-deployment] branch master updated: -more deployment git cleanups |
Date: |
Sun, 12 Jan 2025 16:11:21 +0100 |
This is an automated email from the git hooks/post-receive script.
grothoff pushed a commit to branch master
in repository deployment.
The following commit(s) were added to refs/heads/master by this push:
new fd40f33 -more deployment git cleanups
fd40f33 is described below
commit fd40f3368c200edc37e2586866152f25152e89e4
Author: Christian Grothoff <christian@grothoff.org>
AuthorDate: Sun Jan 12 16:11:19 2025 +0100
-more deployment git cleanups
---
README.md | 22 +-
buildbot/bootstrap-scripts/bootstrap-codespell | 51 ---
buildbot/bootstrap-scripts/bootstrap-linkchecker | 37 --
buildbot/make-buildbot-containerworker.sh | 5 +-
buildbot/make-buildbot-linkchecker.sh | 25 ++
buildbot/make-buildbot-master.sh | 25 +-
buildbot/make-buildbot-sitesworker.sh | 46 +++
buildbot/master.cfg | 6 +-
{codecoverage => buildbot}/with-postgres.sh | 0
codespell/dictionary.txt | 47 ---
.../depo}/.config/systemd/user/bitcoind.env | 0
.../depo}/.config/systemd/user/bitcoind.service | 0
.../depo}/.config/systemd/user/btc-wire.service | 0
.../user/multi-user.target.wants/bitcoind.service | 0
.../user/multi-user.target.wants/btc-wire.service | 0
.../user/multi-user.target.wants/nginx.service | 0
.../taler-local-blog.service | 0
.../taler-local-donations.service | 0
.../taler-local-exchange.target | 0
.../taler-local-landing.service | 0
.../taler-local-merchant-backend.service | 0
.../multi-user.target.wants/wire-gateway.service | 0
.../depo}/.config/systemd/user/nginx.service | 0
.../.config/systemd/user/taler-local-blog.service | 0
.../systemd/user/taler-local-donations.service | 0
.../user/taler-local-exchange-aggregator.service | 0
.../user/taler-local-exchange-closer.service | 0
.../user/taler-local-exchange-httpd.service | 0
.../systemd/user/taler-local-exchange-httpd.socket | 0
.../user/taler-local-exchange-secmod-cs.service | 0
.../user/taler-local-exchange-secmod-eddsa.service | 0
.../user/taler-local-exchange-secmod-rsa.service | 0
.../user/taler-local-exchange-transfer.service | 0
.../user/taler-local-exchange-wirewatch.service | 0
.../systemd/user/taler-local-exchange.target | 0
.../.config/systemd/user/taler-local-frontends.env | 0
.../systemd/user/taler-local-landing.service | 0
.../taler-local-merchant-backend-token.service | 0
.../user/taler-local-merchant-backend.service | 0
.../systemd/user/taler-local-port-redirect.service | 0
.../.config/systemd/user/wire-gateway.service | 0
{depo => historic/depo}/.taler/config/nginx.conf | 0
{depo => historic/depo}/.taler/config/taler.conf | 0
{depo => historic/depo}/.taler/data/.exists | 0
{depo => historic/depo}/.taler/sockets/.exists | 0
{vagrant => historic/vagrant}/.gitignore | 0
{vagrant => historic/vagrant}/README.md | 0
.../vagrant}/ubuntu-focal-fossa-build/Vagrantfile | 0
{vagrant => historic/vagrant}/ubuntu/Vagrantfile | 0
netjail/README | 6 +-
netjail/buildslave-netjail | 13 +
nlnet/task1/Dockerfile | 32 --
nlnet/task1/start.sh | 15 -
nlnet/task2/Dockerfile | 29 --
nlnet/task3/Dockerfile | 15 -
nlnet/task3/keys.sh | 93 -----
nlnet/task3/salted-incoming-payment-template.csv | 2 -
nlnet/task3/start.sh | 79 ----
nlnet/task4/Dockerfile | 42 --
nlnet/task4/launch.sh | 7 -
nlnet/task4/start.sh | 27 --
nlnet/task5/date-range/Dockerfile | 15 -
nlnet/task5/date-range/start-libeufin.sh | 35 --
nlnet/task5/date-range/start.sh | 155 --------
nlnet/task5/long-poll/Dockerfile | 14 -
nlnet/task5/long-poll/start.sh | 134 -------
nlnet/task5/performance/Dockerfile | 70 ----
nlnet/task5/performance/start.sh | 107 ------
pylint/README | 5 -
pylint/pylintrc | 425 ---------------------
{gnu => sign-gnu-artefact}/release-template.txt | 0
{gnu => sign-gnu-artefact}/sign-gnu-artefact | 0
{gnu => sign-gnu-artefact}/upload-gnu-artefact | 0
.../buildbot-worker-linkchecker.service | 14 +-
systemd-services/buildbot-worker-sites.service | 14 +-
{codecoverage => worker-codecoverage}/coverage.sh | 0
.../run-coverage-helper.sh | 0
.../linkchecker.Containerfile | 0
{buildbot => worker-linkchecker}/linkchecker.sh | 2 +-
{buildbot => worker-linkchecker}/linkcheckerrc | 0
{taler-sitesbuild => worker-sites}/Makefile | 2 +-
{taler-sitesbuild => worker-sites}/invalidate.sh | 0
.../update_buywith_page.sh | 0
{taler-sitesbuild => worker-sites}/update_stage.sh | 0
.../update_twister_page.sh | 0
{taler-sitesbuild => worker-sites}/update_www.sh | 0
86 files changed, 145 insertions(+), 1471 deletions(-)
diff --git a/README.md b/README.md
index 6fd724a..bb93272 100644
--- a/README.md
+++ b/README.md
@@ -13,24 +13,32 @@ Buildbot jobs are used to:
(primarily demo.taler.net, test.taler.net, int.taler.net)
- run unit tests
-A namespace/process jail is used to ensure there are no port conflicts or
-surviving processes for unit tests that require ports that might conflict.
-
Deployment Layout
=================
+aptly/ -- FIXME
+bootstrpa-docker/ -- FIXME
buildbot/ -- scripts and configuration for the buildmaster and jobs launched
by it
-envcfg/ -- Git tags for various deployments, specify which versions should be
used
+docker/ -- FIXME
+head.taler.net/ -- FIXME
history/ -- directory for NOT MAINTAINED scripts
+historic/depo/ -- configuration files for depolymerizer deployment
historic/docker/ -- dockerized Taler deployment
historic/guix/ -- Guix packages for Taler
+historic/vagrant/ -- FIXME
netjail/ -- scripts to create a namespaces to ensure buildslaves do not
compete for resources
+netzbon/ -- scripts to assist netzbon with their deployment
postmortem/ -- postmortem reports about major incidents we have had with
lessons learned
private-keys/ -- deployment private keys so that keys do not change if we
migrate elsewhere
-sign-gnu-artefact -- shell script for making releases and preparing upload to
ftp.gnu.org
-systemd-services/ -- service definitions for buildbot build-slaves
-taler-sitesbuild/ -- scripts for updating our Web sites
+regional-currency/ -- scripts to setup a regional currency with minimum effort
+sign-gnu-artefact/ -- shell script for making releases and preparing upload to
ftp.gnu.org
+splitops/ -- shell for multi-sig access control to lock down root on
production systems
+systemd-services/ -- service definitions for buildbot (master and slaves)
+weblate/ -- FIXME
+worker-codecoverage/ -- scripts for running code coverage (currently down!)
+worker-linkchecker/ -- buildbot worker scripts to check for broken links
+worker-sites/ -- buildbot worker scripts for updating our Web sites
TODOS:
diff --git a/buildbot/bootstrap-scripts/bootstrap-codespell
b/buildbot/bootstrap-scripts/bootstrap-codespell
deleted file mode 100755
index faeb6b5..0000000
--- a/buildbot/bootstrap-scripts/bootstrap-codespell
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/bash
-
-# Bootstrap the Taler setup for the user account that
-# is currently logged in.
-
-# Generates a setup for a single user,
-# including a postgresql DB.
-
-set -eu
-
-BRANCH=master
-REPOS="libmicrohttpd gnunet"
-
-cd $HOME
-
-pip3 install --user codespell
-
-for component in $REPOS; do
- if ! test -d $HOME/$component; then
- git clone git://git.gnunet.org/$component.git
- fi
-done
-for component in $REPOS; do
- echo "Checking out $component to $BRANCH"
- git -C $HOME/$component checkout $BRANCH
-done
-
-REPOS="exchange merchant wallet-core sync bank twister"
-
-for component in $REPOS; do
- if ! test -d $HOME/$component; then
- git clone git://git.taler.net/$component.git
- fi
-done
-
-for component in $REPOS; do
- echo "Checking out $component to $BRANCH"
- git -C $HOME/$component checkout $BRANCH
-done
-
-if [[ ! -d worker ]]; then
- buildbot-worker create-worker --umask=0o22 ~/worker localhost:9989
codespell-worker codespell-pass
-fi
-
-mkdir -p ~/.config/systemd/user/
-cp systemd-services/buildbot-worker-doc.service ~/.config/systemd/user/
-
-systemctl --user daemon-reload || echo "Please use 'machinectl shell
codespell@.host' to log in to use this script"
-
-systemctl --user enable buildbot-worker-doc.service
-systemctl --user start buildbot-worker-doc.service
diff --git a/buildbot/bootstrap-scripts/bootstrap-linkchecker
b/buildbot/bootstrap-scripts/bootstrap-linkchecker
deleted file mode 100755
index b7b61d0..0000000
--- a/buildbot/bootstrap-scripts/bootstrap-linkchecker
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/bash
-
-# Bootstrap the Taler setup for the user account that
-# is currently logged in.
-
-# Generates a setup for a single user,
-# including a postgresql DB.
-
-set -eu
-
-BRANCH=master
-REPOS="deployment"
-
-cd $HOME
-
-for component in $REPOS; do
- if ! test -d $HOME/$component; then
- git clone git://git.taler.net/$component.git
- fi
-done
-
-for component in $REPOS; do
- echo "Checking out $component to $BRANCH"
- git -C $HOME/$component checkout $BRANCH
-done
-
-if [[ ! -d worker ]]; then
- buildbot-worker create-worker --umask=0o22 ~/worker 127.0.0.1
linkchecker-worker linkchecker-pass
-fi
-
-#mkdir -p ~/.config/systemd/user/
-#cp systemd-services/buildbot-worker-doc.service ~/.config/systemd/user/
-
-#systemctl --user daemon-reload || echo "Please use 'machinectl shell
docbuilder@.host' to log in to use this script"
-
-#systemctl --user enable buildbot-worker-linkchecker.service
-#systemctl --user start buildbot-worker-linkchecker.service
diff --git a/buildbot/make-buildbot-containerworker.sh
b/buildbot/make-buildbot-containerworker.sh
index 95f48f3..b380951 100755
--- a/buildbot/make-buildbot-containerworker.sh
+++ b/buildbot/make-buildbot-containerworker.sh
@@ -3,13 +3,16 @@
# Bootstrap the Taler setup for the container-worker.
set -eu
-export PATH=/home/buildbot-master/.local/bin:$PATH
if ! test "container-worker" = $(whoami); then
echo Only run as the 'container-worker' user.
exit 1
fi
+export PATH=$HOME/.local/bin:$PATH
+
+pip install --user --break-system-packages buildbot-worker
+
mkdir -p workspace
if [[ ! -d worker ]]; then
diff --git a/buildbot/make-buildbot-linkchecker.sh
b/buildbot/make-buildbot-linkchecker.sh
new file mode 100755
index 0000000..7126e40
--- /dev/null
+++ b/buildbot/make-buildbot-linkchecker.sh
@@ -0,0 +1,25 @@
+#!/bin/bash
+
+# Bootstrap the Taler setup for the linkchecker-worker.
+
+set -eu
+
+if ! test "linkchecker-worker" = $(whoami); then
+ echo Only run as the 'linkchecker-worker' user.
+ exit 1
+fi
+
+cd
+
+export PATH=$HOME/.local/bin:$PATH
+
+pip install --user --break-system-packages buildbot-worker
+
+if ! test -d "$HOME/deployment";
+then
+ git clone git://git.taler.net/deployment.git
+fi
+
+if [[ ! -d worker ]]; then
+ buildbot-worker create-worker --umask=0o22 ~/worker 127.0.0.1:9988
linkchecker-worker linkchecker-pass
+fi
diff --git a/buildbot/make-buildbot-master.sh b/buildbot/make-buildbot-master.sh
index d8657b3..89d1333 100755
--- a/buildbot/make-buildbot-master.sh
+++ b/buildbot/make-buildbot-master.sh
@@ -11,29 +11,36 @@ fi
cd
+export PATH=$HOME/.local/bin:$PATH
+
+pip install --user --break-system-packages buildbot buildbot-www
buildbot-profiler buildbot-prometheus buildbot-console-view buildbot-www-react
buildbot-grid-view buildbot-enhanced-ui buildbot-react-waterfall-view
buildbot-worker buildbot-waterfall-view
+
BRANCH=master
REPOS="deployment"
-cd $HOME
-
-for component in $REPOS; do
- if ! test -d $HOME/$component; then
- git clone git://git.taler.net/$component.git
- fi
+for component in $REPOS;
+do
+ if ! test -d $HOME/$component;
+ then
+ git clone git://git.taler.net/$component.git
+ fi
done
-for component in $REPOS; do
+for component in $REPOS;
+do
echo "Checking out $component to $BRANCH"
git -C $HOME/$component checkout $BRANCH
done
-if [[ ! -d ./master ]]; then
+if [[ ! -d ./master ]];
+then
buildbot create-master master
cd master
ln -s ../deployment/buildbot/master.cfg
cd ..
fi
-if [[ ! -d worker ]]; then
+if [[ ! -d worker ]];
+then
buildbot-worker create-worker --umask=0o22 ~/worker 127.0.0.1:9988
buildmaster-worker buildmaster-pass
fi
diff --git a/buildbot/make-buildbot-sitesworker.sh
b/buildbot/make-buildbot-sitesworker.sh
new file mode 100755
index 0000000..2fff8d2
--- /dev/null
+++ b/buildbot/make-buildbot-sitesworker.sh
@@ -0,0 +1,46 @@
+#!/bin/bash
+
+# Bootstrap the Taler setup for the sites-worker.
+
+set -eu
+
+if ! test "sites-worker" = $(whoami); then
+ echo Only run as the 'sites-worker' user.
+ exit 1
+fi
+
+export PATH=$HOME/.local/bin:$PATH
+
+pip install --user --break-system-packages buildbot-worker
+
+if [[ ! -d worker ]]; then
+ buildbot-worker create-worker --umask=0o22 ~/worker 127.0.0.1:9988
sites-worker sites-pass
+fi
+
+BRANCH=master
+REPOS="www twister buywith"
+
+cd $HOME
+
+for component in $REPOS;
+do
+ if ! test -d "$HOME/$component" ;
+ then
+ git clone "git://git.taler.net/$component.git"
+ fi
+done
+
+for component in $REPOS;
+do
+ echo "Checking out $component to $BRANCH"
+ git -C "$HOME/$component" checkout "$BRANCH"
+done
+mkdir -p ./stamps
+
+ln -sf ../deployment/worker-sites/Makefile stamps/
+ln -sf ../deployment/worker-sites/invalidate.sh stamps/
+
+if [[ ! -d worker ]];
+then
+ buildbot-worker create-worker --umask=0o22 ~/worker localhost:9988
sites-worker sites-pass
+fi
diff --git a/buildbot/master.cfg b/buildbot/master.cfg
index 5e930e9..d60f3cd 100644
--- a/buildbot/master.cfg
+++ b/buildbot/master.cfg
@@ -360,7 +360,7 @@ SCHEDULERS.append(schedulers.SingleBranchScheduler(
##
# linkchecker worker checks for dead links in the Website
-# Location: /home/linkchecker @ taler.net
+# Location: /home/linkchecker-worker
WORKERS.append(Worker("linkchecker-worker", "linkchecker-pass"))
# linkchecker FACTORY
@@ -370,8 +370,8 @@ LINKCHECKER_FACTORY.addStep(
name="linkchecker",
description="Check taler.net website for broken links && Notify",
descriptionDone="Results of wget in buildbot logs.",
- command=["/home/linkchecker/deployment/buildbot/linkchecker.sh"],
- workdir="/home/linkchecker",
+
command=["/home/linkchecker-worker/deployment/worker-linkchecker/linkchecker.sh"],
+ workdir="/home/linkchecker-worker",
haltOnFailure=True,
timeout=7200 # 2 hours
)
diff --git a/codecoverage/with-postgres.sh b/buildbot/with-postgres.sh
similarity index 100%
rename from codecoverage/with-postgres.sh
rename to buildbot/with-postgres.sh
diff --git a/codespell/dictionary.txt b/codespell/dictionary.txt
deleted file mode 100644
index 702ac5c..0000000
--- a/codespell/dictionary.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-# List of "words" that codespell should ignore in our sources.
-#
-# Note: The word sensitivity depends on how the to-be-ignored word is
-# spelled in codespell_lib/data/dictionary.txt. F.e. if there is a word
-# 'foo' and you add 'Foo' _here_, codespell will continue to complain
-# about 'Foo'.
-#
-Nam
-BRE
-ND
-Nd
-TE
-TEH
-UPDATEing
-WAN
-aci
-acn
-ba
-bre
-cant
-clen
-complet
-doas
-ect
-ehr
-fo
-hel
-ifset
-ist
-keypair
-nd
-onl
-openin
-ot
-ser
-sie
-som
-sover
-te
-te
-teh
-tha
-ths
-updateing
-vie
-wan
-wih
diff --git a/depo/.config/systemd/user/bitcoind.env
b/historic/depo/.config/systemd/user/bitcoind.env
similarity index 100%
rename from depo/.config/systemd/user/bitcoind.env
rename to historic/depo/.config/systemd/user/bitcoind.env
diff --git a/depo/.config/systemd/user/bitcoind.service
b/historic/depo/.config/systemd/user/bitcoind.service
similarity index 100%
rename from depo/.config/systemd/user/bitcoind.service
rename to historic/depo/.config/systemd/user/bitcoind.service
diff --git a/depo/.config/systemd/user/btc-wire.service
b/historic/depo/.config/systemd/user/btc-wire.service
similarity index 100%
rename from depo/.config/systemd/user/btc-wire.service
rename to historic/depo/.config/systemd/user/btc-wire.service
diff --git a/depo/.config/systemd/user/multi-user.target.wants/bitcoind.service
b/historic/depo/.config/systemd/user/multi-user.target.wants/bitcoind.service
similarity index 100%
rename from depo/.config/systemd/user/multi-user.target.wants/bitcoind.service
rename to
historic/depo/.config/systemd/user/multi-user.target.wants/bitcoind.service
diff --git a/depo/.config/systemd/user/multi-user.target.wants/btc-wire.service
b/historic/depo/.config/systemd/user/multi-user.target.wants/btc-wire.service
similarity index 100%
rename from depo/.config/systemd/user/multi-user.target.wants/btc-wire.service
rename to
historic/depo/.config/systemd/user/multi-user.target.wants/btc-wire.service
diff --git a/depo/.config/systemd/user/multi-user.target.wants/nginx.service
b/historic/depo/.config/systemd/user/multi-user.target.wants/nginx.service
similarity index 100%
rename from depo/.config/systemd/user/multi-user.target.wants/nginx.service
rename to
historic/depo/.config/systemd/user/multi-user.target.wants/nginx.service
diff --git
a/depo/.config/systemd/user/multi-user.target.wants/taler-local-blog.service
b/historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-blog.service
similarity index 100%
rename from
depo/.config/systemd/user/multi-user.target.wants/taler-local-blog.service
rename to
historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-blog.service
diff --git
a/depo/.config/systemd/user/multi-user.target.wants/taler-local-donations.service
b/historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-donations.service
similarity index 100%
rename from
depo/.config/systemd/user/multi-user.target.wants/taler-local-donations.service
rename to
historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-donations.service
diff --git
a/depo/.config/systemd/user/multi-user.target.wants/taler-local-exchange.target
b/historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-exchange.target
similarity index 100%
rename from
depo/.config/systemd/user/multi-user.target.wants/taler-local-exchange.target
rename to
historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-exchange.target
diff --git
a/depo/.config/systemd/user/multi-user.target.wants/taler-local-landing.service
b/historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-landing.service
similarity index 100%
rename from
depo/.config/systemd/user/multi-user.target.wants/taler-local-landing.service
rename to
historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-landing.service
diff --git
a/depo/.config/systemd/user/multi-user.target.wants/taler-local-merchant-backend.service
b/historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-merchant-backend.service
similarity index 100%
rename from
depo/.config/systemd/user/multi-user.target.wants/taler-local-merchant-backend.service
rename to
historic/depo/.config/systemd/user/multi-user.target.wants/taler-local-merchant-backend.service
diff --git
a/depo/.config/systemd/user/multi-user.target.wants/wire-gateway.service
b/historic/depo/.config/systemd/user/multi-user.target.wants/wire-gateway.service
similarity index 100%
rename from
depo/.config/systemd/user/multi-user.target.wants/wire-gateway.service
rename to
historic/depo/.config/systemd/user/multi-user.target.wants/wire-gateway.service
diff --git a/depo/.config/systemd/user/nginx.service
b/historic/depo/.config/systemd/user/nginx.service
similarity index 100%
rename from depo/.config/systemd/user/nginx.service
rename to historic/depo/.config/systemd/user/nginx.service
diff --git a/depo/.config/systemd/user/taler-local-blog.service
b/historic/depo/.config/systemd/user/taler-local-blog.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-blog.service
rename to historic/depo/.config/systemd/user/taler-local-blog.service
diff --git a/depo/.config/systemd/user/taler-local-donations.service
b/historic/depo/.config/systemd/user/taler-local-donations.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-donations.service
rename to historic/depo/.config/systemd/user/taler-local-donations.service
diff --git a/depo/.config/systemd/user/taler-local-exchange-aggregator.service
b/historic/depo/.config/systemd/user/taler-local-exchange-aggregator.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange-aggregator.service
rename to
historic/depo/.config/systemd/user/taler-local-exchange-aggregator.service
diff --git a/depo/.config/systemd/user/taler-local-exchange-closer.service
b/historic/depo/.config/systemd/user/taler-local-exchange-closer.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange-closer.service
rename to historic/depo/.config/systemd/user/taler-local-exchange-closer.service
diff --git a/depo/.config/systemd/user/taler-local-exchange-httpd.service
b/historic/depo/.config/systemd/user/taler-local-exchange-httpd.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange-httpd.service
rename to historic/depo/.config/systemd/user/taler-local-exchange-httpd.service
diff --git a/depo/.config/systemd/user/taler-local-exchange-httpd.socket
b/historic/depo/.config/systemd/user/taler-local-exchange-httpd.socket
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange-httpd.socket
rename to historic/depo/.config/systemd/user/taler-local-exchange-httpd.socket
diff --git a/depo/.config/systemd/user/taler-local-exchange-secmod-cs.service
b/historic/depo/.config/systemd/user/taler-local-exchange-secmod-cs.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange-secmod-cs.service
rename to
historic/depo/.config/systemd/user/taler-local-exchange-secmod-cs.service
diff --git
a/depo/.config/systemd/user/taler-local-exchange-secmod-eddsa.service
b/historic/depo/.config/systemd/user/taler-local-exchange-secmod-eddsa.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange-secmod-eddsa.service
rename to
historic/depo/.config/systemd/user/taler-local-exchange-secmod-eddsa.service
diff --git a/depo/.config/systemd/user/taler-local-exchange-secmod-rsa.service
b/historic/depo/.config/systemd/user/taler-local-exchange-secmod-rsa.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange-secmod-rsa.service
rename to
historic/depo/.config/systemd/user/taler-local-exchange-secmod-rsa.service
diff --git a/depo/.config/systemd/user/taler-local-exchange-transfer.service
b/historic/depo/.config/systemd/user/taler-local-exchange-transfer.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange-transfer.service
rename to
historic/depo/.config/systemd/user/taler-local-exchange-transfer.service
diff --git a/depo/.config/systemd/user/taler-local-exchange-wirewatch.service
b/historic/depo/.config/systemd/user/taler-local-exchange-wirewatch.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange-wirewatch.service
rename to
historic/depo/.config/systemd/user/taler-local-exchange-wirewatch.service
diff --git a/depo/.config/systemd/user/taler-local-exchange.target
b/historic/depo/.config/systemd/user/taler-local-exchange.target
similarity index 100%
rename from depo/.config/systemd/user/taler-local-exchange.target
rename to historic/depo/.config/systemd/user/taler-local-exchange.target
diff --git a/depo/.config/systemd/user/taler-local-frontends.env
b/historic/depo/.config/systemd/user/taler-local-frontends.env
similarity index 100%
rename from depo/.config/systemd/user/taler-local-frontends.env
rename to historic/depo/.config/systemd/user/taler-local-frontends.env
diff --git a/depo/.config/systemd/user/taler-local-landing.service
b/historic/depo/.config/systemd/user/taler-local-landing.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-landing.service
rename to historic/depo/.config/systemd/user/taler-local-landing.service
diff --git
a/depo/.config/systemd/user/taler-local-merchant-backend-token.service
b/historic/depo/.config/systemd/user/taler-local-merchant-backend-token.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-merchant-backend-token.service
rename to
historic/depo/.config/systemd/user/taler-local-merchant-backend-token.service
diff --git a/depo/.config/systemd/user/taler-local-merchant-backend.service
b/historic/depo/.config/systemd/user/taler-local-merchant-backend.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-merchant-backend.service
rename to
historic/depo/.config/systemd/user/taler-local-merchant-backend.service
diff --git a/depo/.config/systemd/user/taler-local-port-redirect.service
b/historic/depo/.config/systemd/user/taler-local-port-redirect.service
similarity index 100%
rename from depo/.config/systemd/user/taler-local-port-redirect.service
rename to historic/depo/.config/systemd/user/taler-local-port-redirect.service
diff --git a/depo/.config/systemd/user/wire-gateway.service
b/historic/depo/.config/systemd/user/wire-gateway.service
similarity index 100%
rename from depo/.config/systemd/user/wire-gateway.service
rename to historic/depo/.config/systemd/user/wire-gateway.service
diff --git a/depo/.taler/config/nginx.conf
b/historic/depo/.taler/config/nginx.conf
similarity index 100%
rename from depo/.taler/config/nginx.conf
rename to historic/depo/.taler/config/nginx.conf
diff --git a/depo/.taler/config/taler.conf
b/historic/depo/.taler/config/taler.conf
similarity index 100%
rename from depo/.taler/config/taler.conf
rename to historic/depo/.taler/config/taler.conf
diff --git a/depo/.taler/data/.exists b/historic/depo/.taler/data/.exists
similarity index 100%
rename from depo/.taler/data/.exists
rename to historic/depo/.taler/data/.exists
diff --git a/depo/.taler/sockets/.exists b/historic/depo/.taler/sockets/.exists
similarity index 100%
rename from depo/.taler/sockets/.exists
rename to historic/depo/.taler/sockets/.exists
diff --git a/vagrant/.gitignore b/historic/vagrant/.gitignore
similarity index 100%
rename from vagrant/.gitignore
rename to historic/vagrant/.gitignore
diff --git a/vagrant/README.md b/historic/vagrant/README.md
similarity index 100%
rename from vagrant/README.md
rename to historic/vagrant/README.md
diff --git a/vagrant/ubuntu-focal-fossa-build/Vagrantfile
b/historic/vagrant/ubuntu-focal-fossa-build/Vagrantfile
similarity index 100%
rename from vagrant/ubuntu-focal-fossa-build/Vagrantfile
rename to historic/vagrant/ubuntu-focal-fossa-build/Vagrantfile
diff --git a/vagrant/ubuntu/Vagrantfile b/historic/vagrant/ubuntu/Vagrantfile
similarity index 100%
rename from vagrant/ubuntu/Vagrantfile
rename to historic/vagrant/ubuntu/Vagrantfile
diff --git a/netjail/README b/netjail/README
index ad4cc60..60f12e9 100644
--- a/netjail/README
+++ b/netjail/README
@@ -1 +1,5 @@
-The scripts in this folder are used to run a program in a PID and network
namespace.
+The scripts in this folder are used to run a program in a PID and network
+namespace.
+
+The buildslave-netjail file must be placed in /etc/sudoers.d/
+to grant the respective users access to the netjail script.
\ No newline at end of file
diff --git a/netjail/buildslave-netjail b/netjail/buildslave-netjail
new file mode 100644
index 0000000..2532028
--- /dev/null
+++ b/netjail/buildslave-netjail
@@ -0,0 +1,13 @@
+# For /etc/sudoers.d/
+
+# List of users that run a buildslave and thus
+# should have the ability to create their own
+# network namespace.
+# 'grothoff' and 'dold' are listed here to enable them to test things.
+#
+User_Alias BUILDSLAVE = container-worker, sites-worker, linkchecker-worker
+
+# The command that we enable running as 'root'.
+Cmnd_Alias NETJAIL = /usr/local/bin/netjail.sh
+
+BUILDSLAVE ALL = NOPASSWD:NETJAIL
diff --git a/nlnet/task1/Dockerfile b/nlnet/task1/Dockerfile
deleted file mode 100644
index 498d54a..0000000
--- a/nlnet/task1/Dockerfile
+++ /dev/null
@@ -1,32 +0,0 @@
-FROM debian:stable
-
-RUN apt-get update
-RUN apt-get install -y openjdk-17-jre git python3-pip curl jq sqlite3
-RUN pip3 install click requests
-
-# Installation
-RUN git clone git://git.taler.net/libeufin
-WORKDIR /libeufin
-RUN git fetch && git checkout 9c7079e5323eed4d16e24c1c4245d6586cecac53 #
amounts zero-check fixed.
-RUN ./bootstrap
-RUN ./configure --prefix=/usr/local
-RUN make install
-
-# Reverse proxy
-RUN apt-get install -y nginx
-
-# Importing the UI.
-RUN git clone -b prebuilt git://git.taler.net/wallet-core
-RUN git -C wallet-core checkout 75af013b348b08b8fb9e65cc9270f2fde964979b #
checkout rates fixed.
-RUN cp /libeufin/debian/etc/nginx/sites-available/libeufin-sandbox
/etc/nginx/sites-enabled/
-RUN mkdir -p /usr/share/libeufin/demobank-ui/
-RUN mkdir -p /etc/libeufin/
-RUN cp /libeufin/debian/usr/share/libeufin/demobank-ui/demobank-ui-settings.js
/etc/libeufin/
-RUN cp wallet-core/demobank/* /usr/share/libeufin/demobank-ui/
-
-# Default place for the database.
-RUN mkdir /libeufin-data
-
-COPY start.sh /
-# ENTRYPOINT /start.sh
-CMD /start.sh
diff --git a/nlnet/task1/start.sh b/nlnet/task1/start.sh
deleted file mode 100755
index 18bf9b8..0000000
--- a/nlnet/task1/start.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/bash
-
-set -eu
-
-export
LIBEUFIN_SANDBOX_ADMIN_PASSWORD=${LIBEUFIN_SANDBOX_ADMIN_PASSWORD:-admin}
-export
LIBEUFIN_SANDBOX_DB_CONNECTION="jdbc:sqlite:/libeufin-data/libeufin.sqlite"
-libeufin-sandbox config --without-registrations --currency ${CURRENCY:-EUR}
default
-if test -z $LIBEUFIN_EXPOSED_PORT; then
- echo ERROR: LIBEUFIN_EXPOSED_PORT is an empty string.
- exit 1
-fi
-
-sed -i "s/localhost/localhost:$LIBEUFIN_EXPOSED_PORT/"
/etc/libeufin/demobank-ui-settings.js
-service nginx start
-libeufin-sandbox serve --port 5016 --no-localhost-only
diff --git a/nlnet/task2/Dockerfile b/nlnet/task2/Dockerfile
deleted file mode 100644
index e7cc048..0000000
--- a/nlnet/task2/Dockerfile
+++ /dev/null
@@ -1,29 +0,0 @@
-FROM debian:stable
-
-RUN apt-get update
-RUN apt-get install -y git
-
- # python3-pip
-# Libeufin Dependencies
-RUN apt-get install -y openjdk-17-jre
-# Installation
-RUN git clone git://git.taler.net/libeufin
-WORKDIR /libeufin
-RUN git fetch && git checkout a52cf289234683c4ff492cd8b508cfb6c85ca1e8
-RUN ./bootstrap
-RUN apt-get install -y python3-venv
-RUN apt-get install -y make
-RUN ./configure --prefix=/usr/local
-RUN make install
-# FIXME: move to the deps block.
-RUN apt-get install -y postgresql sudo
-RUN grep -v ^host.*all /etc/postgresql/13/main/pg_hba.conf >
/tmp/pg_hba_buf.txt
-RUN echo "host libeufincheck all 127.0.0.1/32 trust" >> /tmp/pg_hba_buf.txt
-RUN echo "host libeufincheck all ::1/128 trust" >> /tmp/pg_hba_buf.txt
-RUN cp /tmp/pg_hba_buf.txt /etc/postgresql/13/main/pg_hba.conf
-# CMD bash
-RUN apt-get install -y jq curl
-CMD service postgresql start && \
- sudo -u postgres createuser -s root && \
- createdb -h /var/run/postgresql libeufincheck && \
- make check
diff --git a/nlnet/task3/Dockerfile b/nlnet/task3/Dockerfile
deleted file mode 100644
index 52e7978..0000000
--- a/nlnet/task3/Dockerfile
+++ /dev/null
@@ -1,15 +0,0 @@
-FROM debian:stable
-
-RUN apt-get update
-RUN apt-get install -y openjdk-17-jre git python3-pip curl jq sqlite3
postgresql python3-requests python3-click sudo
-
-# Installation
-RUN git clone git://git.taler.net/libeufin
-WORKDIR /libeufin
-RUN git fetch && git checkout 4bc5f38f571a45d427f73813ec3846bf59413afa
-RUN ./bootstrap
-RUN ./configure --prefix=/usr/local
-RUN make install
-COPY keys.sh /
-COPY start.sh /
-ENTRYPOINT ["/start.sh"]
diff --git a/nlnet/task3/keys.sh b/nlnet/task3/keys.sh
deleted file mode 100755
index d1fff07..0000000
--- a/nlnet/task3/keys.sh
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-
-set -eu
-
-# This script prepares the EBICS keys for one subscriber
-# at the PostFinance test platform.
-
-export
LIBEUFIN_NEXUS_DB_CONNECTION="jdbc:sqlite:/tmp/postfinance-nexusdb.sqlite3"
-
-NEXUS_USERNAME="netzbon-bridge"
-NEXUS_PASSWORD="secret"
-NEXUS_PORT="5001"
-
-function exit_cleanup()
-{
- for n in `jobs -p`
- do
- kill $n 2> /dev/null || true
- done
- wait || true
-}
-
-trap "exit_cleanup" EXIT
-
-echo "Creating the $NEXUS_USERNAME Nexus user..."
-libeufin-nexus superuser $NEXUS_USERNAME --password $NEXUS_PASSWORD
-echo "Launching Nexus on port $NEXUS_PORT..."
-libeufin-nexus \
- serve --ipv4-only \
- --log-level debug \
- --no-localhost-only \
- --port $NEXUS_PORT > nexus-postfinance.log 2>&1 &
-
-echo -n "Checking Nexus is serving..."
-for i in `seq 1 10`; do
- echo -n .
- if test i = 10; then
- echo Nexus is unreachable
- exit 1
- fi
- if `curl "http://localhost:$NEXUS_PORT/" &> /dev/null`; then
- break
- fi
- sleep 1
-done
-echo OK
-
-export LIBEUFIN_NEXUS_URL="http://localhost:5001/"
-export LIBEUFIN_NEXUS_USERNAME=$NEXUS_USERNAME
-export LIBEUFIN_NEXUS_PASSWORD=$NEXUS_PASSWORD
-
-# FIXME: make connection creation idempotent.
-echo "Creating a EBICS connection at Nexus..."
-libeufin-cli connections new-ebics-connection \
- --ebics-url https://isotest.postfinance.ch/ebicsweb/ebicsweb \
- --host-id PFEBICS \
- --partner-id $EBICS_PARTNER_ID \
- --ebics-user-id $EBICS_USER_ID \
- --dialect pf \
- postfinanceconn || true
-
-# 1, send the keys (INI, HIA)
-# NOTE: these keys will ONLY be considered if the user
-# is in a NEW state, any previous uploaded keys should be reset.
-echo "If that is the case, reset any previous keys via the bank Web UI. Press
Enter to continue.. "
-read -s
-echo -n "Sending the new keys to the bank..."
-libeufin-cli connections connect postfinanceconn
-echo DONE
-
-# 2, invite the user to unblock them in the Web UI
-echo "Please enable the new client keys via the bank Web UI, then press
Enter.. "
-read -s
-
-# 3, download the bank keys (HPB).
-# That's achieved with another 'connect' action (#7880).
-echo -n "Downloading the bank keys..."
-libeufin-cli connections connect postfinanceconn
-echo DONE
-echo "Found the following bank keys:"
-libeufin-cli connections show-connection postfinanceconn | jq -r '.details |
"Auth: \(.bankAuthKeyHash)\nEnc: \(.bankEncKeyHash)"'
-
-echo
-echo "If any bank keys showed up, please check in the bank Web UI if they
match."
-echo "If they match, press Enter to continue, otherwise CTRL-C to end."
-read -s
-
-echo -n "Preparing the local keys bundle.."
-libeufin-cli connections export-backup \
- --passphrase secret \
- --output-file /tmp/pofi.json \
- postfinanceconn > /dev/null
-echo DONE
diff --git a/nlnet/task3/salted-incoming-payment-template.csv
b/nlnet/task3/salted-incoming-payment-template.csv
deleted file mode 100644
index c539939..0000000
--- a/nlnet/task3/salted-incoming-payment-template.csv
+++ /dev/null
@@ -1,2 +0,0 @@
-Product;Channel;Account;Currency;Amount;Reference;Name;Street;Number;Postcode;City;Country;DebtorAddressLine;DebtorAddressLine;DebtorAccount;ReferenceType;UltimateDebtorName;UltimateDebtorStreet;UltimateDebtorNumber;UltimateDebtorPostcode;UltimateDebtorTownName;UltimateDebtorCountry;UltimateDebtorAddressLine;UltimateDebtorAddressLine;RemittanceInformationText
-
QRR;PO;__PAYEE_IBAN__;CHF;33;;D009;Musterstrasse;1;1111;Musterstadt;CH;;;;NON;D009;Musterstrasse;1;1111;Musterstadt;CH;;;__PAYMENT_SALT__
diff --git a/nlnet/task3/start.sh b/nlnet/task3/start.sh
deleted file mode 100755
index 2f8b2a2..0000000
--- a/nlnet/task3/start.sh
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/bin/bash
-
-set -eu
-
-function finish() {
- exit 1
-}
-
-trap finish SIGINT
-
-# Expected arguments are:
-#
-# $1 := EBICS user ID
-# $2 := EBICS partner ID (a.k.a. customer ID)
-# $3 := IBAN as assigned by the PostFinance test platform.
-
-# Suggested invocation via 'docker':
-#
-# docker run -it $IMAGE_TAG $EBICS_USER_ID $EBICS_PARTNER_ID
-service postgresql start
-sudo -u postgres createuser -s root
-createdb libeufincheck
-# This script conducts the key exchange with the bank
-# and guides the user to download and upload docuemts
-# to the bank. It pauses the execution to let the user
-# check and set the Web UI as a double-check mean.
-
-# Setting the EBICS keys. It'll place them in the container's
-# /tmp/pofi.json, where Kotlin expects them.
-export EBICS_USER_ID=$1
-export EBICS_PARTNER_ID=$2
-/keys.sh
-
-# If the keys are ready, it proceeds to invoke the uploading
-# and downloading logic.
-
-# Upload test.
-
-# The test runner will upload one pain.001 document to
-# the bank. Thereafter, the user can check the existtence
-# of such document via the bank Web UI. Moreover, the user
-# is offered the possibility to specify a custom payment
-# subject.
-
-MY_IBAN=$3
-PAIN_SALT=$RANDOM
-echo
-echo "Now preparing the pain.001 to upload to the bank via LibEuFin."
-echo "This document instructs the bank to send money to an arbitrary"
-echo "IBAN by debiting the test platform bank account."
-echo "The outgoing payment defaults to have this subject: $PAIN_SALT".
-echo "Please enter any value in this prompt, in case you want to"
-echo -n "change the default subject: "
-read MAYBE_PAIN_SALT
-
-if ! test "x" = "x$MAYBE_PAIN_SALT"; then
- PAIN_SALT=$MAYBE_PAIN_SALT
-fi
-
-echo "The pain.001 will have this subject: '$PAIN_SALT', now calling"
-echo "LibEuFin to upload it via EBICS.."
-cd /libeufin; ./gradlew -q :nexus:pofi --args="--my-iban \"$MY_IBAN\" upload
--subject \"$PAIN_SALT\""; cd -
-echo DONE
-
-echo
-echo "Please check the bank Web UI to find the pain.001 document"
-echo "whose subject is '$PAIN_SALT'. If that is found, then LibEuFin"
-echo "has successfully uploaded it. In the next step, LibEuFin"
-echo "will download the new banking records. If '$PAIN_SALT' is found"
-echo "in the logs, then it succeeded. Press Enter to continue.. "
-read -s
-
-# Download test.
-
-# The test runnner proceeds with downloading the banking
-# records that witness the payment that was uploaded shortly
-# ago. If the logs show the payment subject that belongs
-# to such payment, then the download went through.
-cd /libeufin; ./gradlew -q :nexus:pofi --args="--my-iban \"$MY_IBAN\"
download"; cd -
diff --git a/nlnet/task4/Dockerfile b/nlnet/task4/Dockerfile
deleted file mode 100644
index 0a3be9a..0000000
--- a/nlnet/task4/Dockerfile
+++ /dev/null
@@ -1,42 +0,0 @@
-FROM debian:stable
-
-RUN apt-get update
-RUN apt-get install -y \
- git \
- openjdk-17-jre \
- python3-pip \
- curl \
- jq \
- postgresql \
- python3-requests \
- python3-click \
- sudo \
- time \
- autoconf \
- autopoint \
- libtool \
- texinfo \
- libgcrypt-dev \
- libidn11-dev \
- zlib1g-dev \
- libunistring-dev \
- libjansson-dev \
- recutils \
- libsqlite3-dev \
- libpq-dev \
- libcurl4-openssl-dev \
- libsodium-dev \
- libqrencode-dev \
- zip
-
-# Installation
-RUN git clone git://git.taler.net/libeufin
-WORKDIR /libeufin
-RUN git fetch && git checkout 736c3998648ad249577f8930b616e1f27647f938
-RUN ./bootstrap
-RUN ./configure --prefix=/usr/local
-RUN make install
-RUN make install-nexus
-WORKDIR /
-COPY start.sh /
-ENTRYPOINT ["/start.sh"]
diff --git a/nlnet/task4/launch.sh b/nlnet/task4/launch.sh
deleted file mode 100755
index bc1508e..0000000
--- a/nlnet/task4/launch.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Binds the container internal port 8080 to the host's.
-
-set -eu
-
-docker run -p 8080:8080 -it monitor
diff --git a/nlnet/task4/start.sh b/nlnet/task4/start.sh
deleted file mode 100755
index 3b45d57..0000000
--- a/nlnet/task4/start.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-set -eu
-
-service postgresql start
-sudo -u postgres createuser -s root
-createdb libeufinbank
-cat << EOF > /usr/bin/taler-config
-#!/bin/bash
-
-echo postgresql:///libeufinbank
-EOF
-chmod +x /usr/bin/taler-config
-sed -i 's/ALLOW_CONVERSION = no/ALLOW_CONVERSION = yes/' \
- /libeufin/contrib/libeufin-bank.conf
-cat << EOF >> /libeufin/contrib/libeufin-bank.conf
-
-[nexus-ebics]
-currency = EUR
-[nexus-postgres]
-config = postgresql:///libeufinbank
-EOF
-libeufin-bank dbinit -c /libeufin/contrib/libeufin-bank.conf
-libeufin-nexus dbinit -c /libeufin/contrib/libeufin-bank.conf
-/libeufin/contrib/populate-stats.sh /libeufin/contrib/libeufin-bank.conf --one
-libeufin-bank passwd admin nlnet
-libeufin-bank serve -c /libeufin/contrib/libeufin-bank.conf
diff --git a/nlnet/task5/date-range/Dockerfile
b/nlnet/task5/date-range/Dockerfile
deleted file mode 100644
index 8d1224f..0000000
--- a/nlnet/task5/date-range/Dockerfile
+++ /dev/null
@@ -1,15 +0,0 @@
-FROM debian:stable
-
-RUN apt-get update
-RUN apt-get install -y openjdk-17-jre git python3-pip curl jq sqlite3
postgresql python3-requests python3-click sudo
-
-# Installation
-RUN git clone git://git.taler.net/libeufin
-WORKDIR /libeufin
-RUN git fetch && git checkout a614d433a8307468f1074114086ae0a47b848472
-RUN ./bootstrap
-RUN ./configure --prefix=/usr/local
-RUN make install
-COPY start-libeufin.sh /
-COPY start.sh /
-ENTRYPOINT ["/start.sh"]
diff --git a/nlnet/task5/date-range/start-libeufin.sh
b/nlnet/task5/date-range/start-libeufin.sh
deleted file mode 100644
index 8f000a4..0000000
--- a/nlnet/task5/date-range/start-libeufin.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-DB_CONN="postgresql:///libeufincheck"
-export LIBEUFIN_SANDBOX_DB_CONNECTION=$DB_CONN
-export LIBEUFIN_NEXUS_DB_CONNECTION=$DB_CONN
-
-echo -n Delete previous data...
-libeufin-sandbox reset-tables
-libeufin-nexus reset-tables
-echo DONE
-echo -n Configure the default demobank with MANA...
-libeufin-sandbox config --with-signup-bonus --currency MANA default
-echo DONE
-echo -n Setting the default exchange at Sandbox...
-libeufin-sandbox \
- default-exchange \
- "https://exchange.example.com/" \
- "payto://iban/NOTUSED"
-echo DONE
-echo -n Start the bank...
-export LIBEUFIN_SANDBOX_ADMIN_PASSWORD=foo
-libeufin-sandbox serve > sandbox.log 2>&1 &
-SANDBOX_PID=$!
-echo DONE
-echo -n Wait for the bank...
-curl --max-time 4 --retry-all-errors --retry-connrefused --retry-delay 1
--retry 10 http://localhost:5000/ &> /dev/null
-echo DONE
-echo -n Make one superuser at Nexus...
-libeufin-nexus superuser test-user --password x
-echo DONE
-echo -n Launching Nexus...
-libeufin-nexus serve &> nexus.log &
-NEXUS_PID=$!
-echo DONE
-echo -n Waiting for Nexus...
-curl --max-time 4 --retry-all-errors --retry-connrefused --retry-delay 1
--retry 10 http://localhost:5001/ &> /dev/null
-echo DONE
diff --git a/nlnet/task5/date-range/start.sh b/nlnet/task5/date-range/start.sh
deleted file mode 100755
index c61cfee..0000000
--- a/nlnet/task5/date-range/start.sh
+++ /dev/null
@@ -1,155 +0,0 @@
-#!/bin/bash
-
-# This script shows how Nexus can request histories from
-# a particular time frame. Such request must succeed via
-# two connection types: EBICS and x-libeufin-bank. EBICS
-# ensures the fetching of fiat payments made to the regional
-# currency authority, whereas x-libeufin-bank does it for
-# the regional currency circuit. Note: the time-framed
-# request is exceptional: it's used only after a complaint
-# from a user where they didn't get their funds as expected.
-
-set -eu
-
-service postgresql start
-sudo -u postgres createuser -s root
-createdb libeufincheck
-
-echo -n Launching and confirguring LibEuFin..
-source /start-libeufin.sh &> /dev/null
-# Register the Sandbox account.
-export LIBEUFIN_SANDBOX_USERNAME=sandbox-user
-export LIBEUFIN_SANDBOX_PASSWORD=foo
-libeufin-cli \
- sandbox --sandbox-url http://localhost:5000/ \
- demobank \
- register
-# x-libeufin-bank connection.
-# Creating the x-libeufin-bank connection at Nexus.
-export LIBEUFIN_NEXUS_USERNAME=test-user
-export LIBEUFIN_NEXUS_PASSWORD=x
-export LIBEUFIN_NEXUS_URL=http://localhost:5001
-libeufin-cli connections new-xlibeufinbank-connection \
- --bank-url "http://localhost:5000/demobanks/default/access-api" \
- --username sandbox-user \
- --password foo \
- xlibeufinbankconn
-# Connecting the x-libeufin-bank connection...
-libeufin-cli connections connect xlibeufinbankconn
-# Importing the bank account under a local name at Nexus.
-# Importing the x-libeufin-bank account locally..
-libeufin-cli connections import-bank-account \
- --offered-account-id sandbox-user \
- --nexus-bank-account-id foo-at-nexus xlibeufinbankconn
-
-# EBICS connection.
-## Sandbox side.
-export LIBEUFIN_SANDBOX_USERNAME=admin
-# "Create EBICS host at Sandbox..."
-libeufin-cli sandbox \
- --sandbox-url http://localhost:5000 \
- ebicshost create --host-id wwwebics
-# Create nlnet EBICS subscriber at Sandbox
-libeufin-cli sandbox \
- --sandbox-url http://localhost:5000 \
- demobank new-ebicssubscriber --host-id wwwebics \
- --user-id nlnet --partner-id nlnet \
- --bank-account sandbox-user # that's a username _and_ a bank account name
-## Nexus side.
-export LIBEUFIN_NEXUS_USERNAME=test-user
-export LIBEUFIN_NEXUS_PASSWORD=x
-export LIBEUFIN_NEXUS_URL=http://localhost:5001
-# Creating the EBICS connection at Nexus...
-libeufin-cli connections new-ebics-connection \
- --ebics-url "http://localhost:5000/ebicsweb" \
- --host-id wwwebics \
- --partner-id nlnet \
- --ebics-user-id nlnet \
- ebicsconn
-# Setup EBICS keying...
-libeufin-cli connections connect ebicsconn > /dev/null
-# Download bank account name from Sandbox...
-libeufin-cli connections download-bank-accounts ebicsconn
-# Importing bank account info into Nexus...
-libeufin-cli connections import-bank-account \
- --offered-account-id sandbox-user \
- --nexus-bank-account-id bar-at-nexus ebicsconn
-echo DONE
-
-FIRST_JAN_2020="1577833200000" # in milliseconds
-END_DEC_2019="2019-12-30"
-MID_JAN_2020="2020-01-15"
-
-echo Make sample transaction..
-# 0, setup and start services.
-libeufin-sandbox make-transaction \
- --credit-account=admin \
- --debit-account=sandbox-user MANA:2 \
- "task5" # subject.
-echo DONE
-
-echo -n Articifially set the transaction date to $FIRST_JAN_2020..
-# 1, set artificial time for the transaction at January, 1st 2020.
-echo "UPDATE bankaccounttransactions SET date='$FIRST_JAN_2020' WHERE
subject='task5'" | psql -q -d libeufincheck
-echo DONE
-
-# 2, retrieve the transaction via Nexus, for both
-# connections and by asking for a (narrow) time frame
-# that includes the 2020-01-01 payment.
-
-echo -n Nexus: syncing banking records for the time frame
$END_DEC_2019-$MID_JAN_2020 via EBICS..
-# Fetch time-framed payments via EBICS.
-libeufin-cli \
- accounts \
- fetch-transactions \
- --level=report \
- --range-type=time-range \
- --start=$END_DEC_2019 \
- --end=$MID_JAN_2020 \
- bar-at-nexus > /dev/null # EBICS
-echo DONE
-
-echo Showing the synced data..
-# Now checks if Nexus ingested and shows the
-# expected payment.
-libeufin-cli \
- accounts \
- transactions \
- bar-at-nexus
-echo DONE
-
-echo Resetting the Nexus database..
-# Bring the database state so that Nexus does not hold any payment.
-echo "DELETE FROM nexusbanktransactions" | psql -d libeufincheck
-echo "DELETE FROM nexusbankmessages" | psql -d libeufincheck
-echo DONE
-
-echo Checking that no payment data appears after the reset..
-# Double-checking that the future steps start
-# without the previous transactions.
-libeufin-cli \
- accounts \
- transactions \
- foo-at-nexus # FIXME: put a 204 No Content check?
-echo DONE
-
-# Fetch time-framed payments via x-libeufin-bank.
-echo Nexus: syncing banking records for the time frame
${END_DEC_2019}_${MID_JAN_2020} via x-libeufin-bank..
-libeufin-cli \
- accounts \
- fetch-transactions \
- --level=statement \
- --range-type=time-range \
- --start=$END_DEC_2019 \
- --end=$MID_JAN_2020 \
- foo-at-nexus
-echo DONE
-
-# As in the previous case, now Nexus should show
-# the 2020-01-01 the payment.
-echo Showing the synced data..
-libeufin-cli \
- accounts \
- transactions \
- foo-at-nexus # FIXME: put a 200 OK check?
-echo DONE
diff --git a/nlnet/task5/long-poll/Dockerfile b/nlnet/task5/long-poll/Dockerfile
deleted file mode 100644
index 713e47e..0000000
--- a/nlnet/task5/long-poll/Dockerfile
+++ /dev/null
@@ -1,14 +0,0 @@
-FROM debian:stable
-
-RUN apt-get update
-RUN apt-get install -y openjdk-17-jre git python3-pip curl jq sqlite3
postgresql python3-requests python3-click sudo libgnunet0.19
-
-# Installation
-RUN git clone git://git.taler.net/libeufin
-WORKDIR /libeufin
-RUN git fetch && git checkout 934a73b09b9e9abba348e15ddc058df5bb9cd6a3
-RUN ./bootstrap
-RUN ./configure --prefix=/usr/local
-RUN make install
-COPY start.sh /
-ENTRYPOINT ["/start.sh"]
diff --git a/nlnet/task5/long-poll/start.sh b/nlnet/task5/long-poll/start.sh
deleted file mode 100755
index 46a0af2..0000000
--- a/nlnet/task5/long-poll/start.sh
+++ /dev/null
@@ -1,134 +0,0 @@
-#!/bin/bash
-
-set -eu
-
-service postgresql start
-sudo -u postgres createuser -s root
-createdb libeufincheck
-
-wire_transfer () {
- RESERVE_PUB=$(gnunet-ecc -g1 /tmp/www &> /dev/null && gnunet-ecc -p /tmp/www)
- DB_CONN="postgresql:///libeufincheck"
- libeufin-sandbox \
- make-transaction \
- --credit-account=sandbox-user \
- --debit-account=admin MANA:2 \
- $RESERVE_PUB
-}
-
-WITH_TASKS=1
-echo RUNNING SANDBOX-NEXUS EBICS PAIR
-jq --version &> /dev/null || (echo "'jq' command not found"; exit 77)
-curl --version &> /dev/null || (echo "'curl' command not found"; exit 77)
-
-DB_CONN="postgresql:///libeufincheck"
-export LIBEUFIN_SANDBOX_DB_CONNECTION=$DB_CONN
-export LIBEUFIN_NEXUS_DB_CONNECTION=$DB_CONN
-
-echo -n Delete previous data...
-libeufin-sandbox reset-tables
-libeufin-nexus reset-tables
-echo DONE
-echo -n Configure the default demobank with MANA...
-libeufin-sandbox config --with-signup-bonus --currency MANA default
-echo DONE
-echo -n Setting the default exchange at Sandbox...
-libeufin-sandbox \
- default-exchange \
- "https://exchange.example.com/" \
- "payto://iban/NOTUSED"
-echo DONE
-echo -n Start the bank...
-export LIBEUFIN_SANDBOX_ADMIN_PASSWORD=foo
-libeufin-sandbox serve > sandbox.log 2>&1 &
-SANDBOX_PID=$!
-echo DONE
-echo -n Wait for the bank...
-curl --max-time 4 --retry-all-errors --retry-connrefused --retry-delay 1
--retry 10 http://localhost:5000/ &> /dev/null
-echo DONE
-echo -n Make one superuser at Nexus...
-libeufin-nexus superuser test-user --password x
-echo DONE
-echo -n Launching Nexus...
-libeufin-nexus serve &> nexus.log &
-NEXUS_PID=$!
-echo DONE
-echo -n Waiting for Nexus...
-curl --max-time 4 --retry-all-errors --retry-connrefused --retry-delay 1
--retry 10 http://localhost:5001/ &> /dev/null
-echo DONE
-
-echo -n "Register the Sandbox account..."
-export LIBEUFIN_SANDBOX_USERNAME=sandbox-user
-export LIBEUFIN_SANDBOX_PASSWORD=foo
-libeufin-cli \
- sandbox --sandbox-url http://localhost:5000/ \
- demobank \
- register
-echo DONE
-echo -n Creating the x-libeufin-bank connection at Nexus...
-export LIBEUFIN_NEXUS_USERNAME=test-user
-export LIBEUFIN_NEXUS_PASSWORD=x
-export LIBEUFIN_NEXUS_URL=http://localhost:5001
-# echoing the password to STDIN, as that is a "prompt" option.
-libeufin-cli connections new-xlibeufinbank-connection \
- --bank-url "http://localhost:5000/demobanks/default/access-api" \
- --username sandbox-user \
- --password foo \
- wwwconn
-echo DONE
-echo -n Connecting the x-libeufin-bank connection...
-libeufin-cli connections connect wwwconn
-echo DONE
-# Importing the bank account under a local name at Nexus.
-echo -n Importing the x-libeufin-bank account locally..
-libeufin-cli connections import-bank-account \
- --offered-account-id sandbox-user \
- --nexus-bank-account-id foo-at-nexus wwwconn
-echo DONE
-echo -n Create the Taler facade at Nexus...
-libeufin-cli facades \
- new-taler-wire-gateway-facade \
- --currency TESTKUDOS --facade-name test-facade \
- wwwconn foo-at-nexus
-echo DONE
-if test 1 = $WITH_TASKS; then
- echo -n Creating submit transactions task..
- libeufin-cli accounts task-schedule \
- --task-type submit \
- --task-name www-payments \
- --task-cronspec "* * *" \
- foo-at-nexus || true
- # Tries every second. Ask C52
- echo DONE
- echo -n Creating fetch transactions task..
- # Not idempotent, FIXME #7739
- libeufin-cli accounts task-schedule \
- --task-type fetch \
- --task-name www-history \
- --task-cronspec "* * *" \
- --task-param-level statement \
- --task-param-range-type since-last \
- foo-at-nexus || true
- echo DONE
-else
- echo NOT creating background tasks!
-fi
-
-echo
-echo Services are online! The following shell offers a 'wire_transfer'
-echo command that wires money to Nexus 'test-user'. Give it after having
-echo connected an HTTP client that long-polls to Nexus. As an example, a
-echo 100 seconds long-poller to Nexus is the following command:
-echo curl -v -u test-user:x
"'http://localhost:5001/facades/test-facade/taler-wire-gateway/history/incoming?delta=5&long_poll_ms=100000'"
-echo
-echo Hint: after having issued the previous command and having observed
-echo that it actually long-polls, press CTRL-Z to send it in the background,
-echo "then wire the funds to the long-poller with 'wire_transfer',"
-echo "and finally give 'fg 1' to bring the long-poller in the foreground."
-echo If the client now shows a response, then the long-polling mechanism
-echo worked.
-echo
-
-cd /
-export -f wire_transfer
-bash
diff --git a/nlnet/task5/performance/Dockerfile
b/nlnet/task5/performance/Dockerfile
deleted file mode 100644
index 4daeaf0..0000000
--- a/nlnet/task5/performance/Dockerfile
+++ /dev/null
@@ -1,70 +0,0 @@
-FROM debian:stable
-
-RUN apt-get update
-RUN apt-get install -y \
- git \
- openjdk-17-jre \
- python3-pip \
- curl \
- jq \
- postgresql \
- python3-requests \
- python3-click \
- sudo \
- time \
- autoconf \
- autopoint \
- libtool \
- texinfo \
- libgcrypt-dev \
- libidn11-dev \
- zlib1g-dev \
- libunistring-dev \
- libjansson-dev \
- recutils \
- libsqlite3-dev \
- libpq-dev \
- libcurl4-openssl-dev \
- libsodium-dev \
- libqrencode-dev \
- zip
-
-# Installation
-RUN git clone git://git.taler.net/libeufin
-WORKDIR /libeufin
-RUN git fetch && git checkout 4bc5f38f571a45d427f73813ec3846bf59413afa
-RUN ./bootstrap
-RUN ./configure --prefix=/usr/local
-RUN make install
-WORKDIR /
-RUN git clone git://git.gnunet.org/libmicrohttpd
-WORKDIR /libmicrohttpd
-RUN ./bootstrap
-RUN ./configure --disable-doc
-RUN make install
-WORKDIR /
-RUN git clone git://git.gnunet.org/gnunet
-WORKDIR /gnunet
-RUN apt-get install -y python3-sphinx python3-sphinx-rtd-theme # Move up?
-RUN ./bootstrap
-RUN ./configure
-RUN pip3 install --break-system-packages htmlark
-RUN make install
-WORKDIR /
-RUN git clone git://git.taler.net/exchange
-WORKDIR /exchange
-RUN ./bootstrap
-RUN ./configure
-RUN make install
-WORKDIR /
-RUN git clone git://git.taler.net/merchant
-WORKDIR /merchant
-RUN ./bootstrap
-RUN ./configure
-RUN make install
-WORKDIR /
-
-COPY start.sh /
-RUN apt-get install -y wget
-RUN apt-get install -y bc
-ENTRYPOINT ["/start.sh"]
diff --git a/nlnet/task5/performance/start.sh b/nlnet/task5/performance/start.sh
deleted file mode 100755
index 2cc9175..0000000
--- a/nlnet/task5/performance/start.sh
+++ /dev/null
@@ -1,107 +0,0 @@
-#!/bin/bash
-
-# This script shows, via runnuing the benchmark, how
-# the LibEuFin database connections are significantly
-# shorter than the benchmark total time.
-
-# For this reason, it can only be that LibEuFin opens
-# and closes many PostgreSQL connections, as it is required
-# by milestone #3.
-
-set -eu
-
-export HOW_MANY_WITHDRAWALS=100
-
-service postgresql start
-sudo -u postgres createuser -s root
-
-# Activating the disconnection logs.
-sudo -u postgres psql -q -c "ALTER SYSTEM SET log_disconnections = 'on'" -c
"SELECT pg_reload_conf()" > /dev/null
-
-# Converts AA:BB:CC.DDD to milliseconds.
-convert_pg_time_to_ms () {
- awk -F[.:] '{SECS=(60*60*$1)+(60*$2)+$3; MILLI=$4;
TOTAL_MS=(SECS*1000)+MILLI; print TOTAL_MS}'
-}
-
-createdb talercheck
-export LD_LIBRARY_PATH=/usr/local/lib
-
-prepare_and_run () {
- taler-unified-setup.sh \
- -Wwemtns \
- -c /exchange/src/benchmark/benchmark-cs.conf \
- -u exchange-account-2 &> /check_ready.txt &
- # Wait that the prep. went through.
- echo -n Waiting the unified setup to complete..
- READY="NO"
- for i in `seq 100` true; do
- if grep -q "<<READY>>" /check_ready.txt; then
- READY="YES"
- break
- fi
- echo -n "."; sleep 1
- done
-
- if test $READY = "YES"; then
- echo "DONE"
- else
- cat /check_ready.txt
- echo FAIL
- exit 1
- fi
-
- echo Running the benchmark..
- taler-exchange-benchmark \
- -c /exchange/src/benchmark/benchmark-cs.conf.edited \
- -u exchange-account-2 \
- -L WARNING \
- -n 1 \
- -r $HOW_MANY_WITHDRAWALS
-}
-
-export -f prepare_and_run
-/usr/bin/time -o /benchmark-wall-clock-time.txt --format=%e bash -c
"prepare_and_run"
-
-NEXUS_PID=$(cat /libeufin-nexus.pid)
-SANDBOX_PID=$(cat /libeufin-sandbox.pid)
-
-if test -z $NEXUS_PID; then
- echo Could not find Nexus PID, failing.
- exit 1
-fi
-
-if test -z $SANDBOX_PID; then
- echo Could not find Sandbox PID, failing.
- exit 1
-fi
-
-# Convert the wall clock time to milliseconds, to make
-# it compatible with the format as GREPped through Postgres logs.
-BENCHMARK_TOT_MS=$(awk -F. '{t=($1 * 1000 + $2 * 10)} END {print t}'
/benchmark-wall-clock-time.txt)
-
-NEXUS_LONGEST_DB_SESSION_MS=$(grep disconnection <
/var/log/postgresql/postgresql-15-main.log | grep $NEXUS_PID | grep -o
"session time:.*$" | grep -o [0-9]:[0-9][0-9]:[0-9][0-9]\.[0-9][0-9][0-9] |
convert_pg_time_to_ms | sort -n | tail -n 1)
-
-SANDBOX_LONGEST_DB_SESSION_MS=$(grep disconnection <
/var/log/postgresql/postgresql-15-main.log | grep $SANDBOX_PID | grep -o
"session time:.*$" | grep -o [0-9]:[0-9][0-9]:[0-9][0-9]\.[0-9][0-9][0-9] |
convert_pg_time_to_ms | sort -n | tail -n 1)
-
-if test $NEXUS_LONGEST_DB_SESSION_MS -gt $BENCHMARK_TOT_MS; then
- echo Nexus had a DB session longer than the benchmark itself, failing.
- exit 1
-fi
-
-if test $SANDBOX_LONGEST_DB_SESSION_MS -gt $BENCHMARK_TOT_MS; then
- echo Sandbox had a DB session longer than the benchmark itself, failing.
- exit 1
-fi
-
-NEXUS_TIME_PORTION=$(echo "($NEXUS_LONGEST_DB_SESSION_MS / $BENCHMARK_TOT_MS)
* 100" | bc -lq | sed 's/^\./0./')
-SANDBOX_TIME_PORTION=$(echo "($SANDBOX_LONGEST_DB_SESSION_MS /
$BENCHMARK_TOT_MS) * 100" | bc -lq | sed 's/^\./0./')
-
-# Here: the further from 1 the better.
-echo Nexus longest DB session is $NEXUS_TIME_PORTION percent of the total
benchmark time.
-echo Sandbox longest DB session is $SANDBOX_TIME_PORTION percent of the total
benchmark time.
-
-# Now show the total space occupied by the database.
-# Although that's a _total_ estimate, it'll anyhow show
-# that _also_ libeufin has reasonable data usage.
-TOTAL_DB_SPACE=$(echo "SELECT pg_size_pretty(pg_database_size('talercheck'))"
| psql -d talercheck | grep "^ [0-9]" | tr -d "[:blank:]")
-echo "The total space occupied by the database for $HOW_MANY_WITHDRAWALS
withdrawals is $TOTAL_DB_SPACE"
diff --git a/pylint/README b/pylint/README
deleted file mode 100644
index 59eef70..0000000
--- a/pylint/README
+++ /dev/null
@@ -1,5 +0,0 @@
-rc file to drive pylint; mainly used to disable certain
-warning which aren't critical to our applications.
-
-We added the "missing docstring" warning to the ignored
-ones.
diff --git a/pylint/pylintrc b/pylint/pylintrc
deleted file mode 100644
index f1fb109..0000000
--- a/pylint/pylintrc
+++ /dev/null
@@ -1,425 +0,0 @@
-[MASTER]
-
-# A comma-separated list of package or module names from where C extensions may
-# be loaded. Extensions are loading into the active Python interpreter and may
-# run arbitrary code
-extension-pkg-whitelist=
-
-# Add files or directories to the blacklist. They should be base names, not
-# paths.
-ignore=CVS,migrations,south_migrations,wsgi.py
-
-# Add files or directories matching the regex patterns to the blacklist. The
-# regex matches against base names, not paths.
-ignore-patterns=
-
-# Python code to execute, usually for sys.path manipulation such as
-# pygtk.require().
-#init-hook=
-
-# Use multiple processes to speed up Pylint.
-jobs=1
-
-# List of plugins (as comma separated values of python modules names) to load,
-# usually to register additional checkers.
-load-plugins=
-
-# Pickle collected data for later comparisons.
-persistent=yes
-
-# Specify a configuration file.
-#rcfile=
-
-# Allow loading of arbitrary C extensions. Extensions are imported into the
-# active Python interpreter and may run arbitrary code.
-unsafe-load-any-extension=no
-
-
-[MESSAGES CONTROL]
-
-# Only show warnings with the listed confidence levels. Leave empty to show
-# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
-confidence=
-
-# Disable the message, report, category or checker with the given id(s). You
-# can either give multiple identifiers separated by comma (,) or put this
-# option multiple times (only on the command line, not in the configuration
-# file where it should appear only once).You can also use "--disable=all" to
-# disable everything first and then reenable specific checks. For example, if
-# you want to run only the similarities checker, you can use "--disable=all
-# --enable=similarities". If you want to run only the classes checker, but have
-# no Warning level messages displayed, use"--disable=all --enable=classes
-# --disable=W"
-disable=print-statement,parameter-unpacking,unpacking-in-except,old-raise-syntax,backtick,long-suffix,old-ne-operator,old-octal-literal,import-star-module-level,raw-checker-failed,bad-inline-option,locally-disabled,locally-enabled,file-ignored,suppressed-message,useless-suppression,deprecated-pragma,apply-builtin,basestring-builtin,buffer-builtin,cmp-builtin,coerce-builtin,execfile-builtin,file-builtin,long-builtin,raw_input-builtin,reduce-builtin,standarderror-builtin,unicode-builtin,xr
[...]
-
-# Enable the message, report, category or checker with the given id(s). You can
-# either give multiple identifier separated by comma (,) or put this option
-# multiple time (only on the command line, not in the configuration file where
-# it should appear only once). See also the "--disable" option for examples.
-enable=
-
-
-[REPORTS]
-
-# Python expression which should return a note less than 10 (10 is the highest
-# note). You have access to the variables errors warning, statement which
-# respectively contain the number of errors / warnings messages and the total
-# number of statements analyzed. This is used by the global evaluation report
-# (RP0004).
-evaluation=10.0 - ((float(5 * error + warning + refactor + convention) /
statement) * 10)
-
-# Template used to display messages. This is a python new-style format string
-# used to format the message information. See doc for all details
-#msg-template=
-
-# Set the output format. Available formats are text, parseable, colorized, json
-# and msvs (visual studio).You can also give a reporter class, eg
-# mypackage.mymodule.MyReporterClass.
-output-format=text
-
-# Tells whether to display a full report or only the messages
-reports=no
-
-# Activate the evaluation score.
-score=yes
-
-
-[REFACTORING]
-
-# Maximum number of nested blocks for function / method body
-max-nested-blocks=5
-
-
-[SIMILARITIES]
-
-# Ignore comments when computing similarities.
-ignore-comments=yes
-
-# Ignore docstrings when computing similarities.
-ignore-docstrings=yes
-
-# Ignore imports when computing similarities.
-ignore-imports=no
-
-# Minimum lines number of a similarity.
-min-similarity-lines=4
-
-
-[SPELLING]
-
-# Spelling dictionary name. Available dictionaries: none. To make it working
-# install python-enchant package.
-spelling-dict=
-
-# List of comma separated words that should not be checked.
-spelling-ignore-words=
-
-# A path to a file that contains private dictionary; one word per line.
-spelling-private-dict-file=
-
-# Tells whether to store unknown words to indicated private dictionary in
-# --spelling-private-dict-file option instead of raising a message.
-spelling-store-unknown-words=no
-
-
-[TYPECHECK]
-
-# List of decorators that produce context managers, such as
-# contextlib.contextmanager. Add to this list to register other decorators that
-# produce valid context managers.
-contextmanager-decorators=contextlib.contextmanager
-
-# List of members which are set dynamically and missed by pylint inference
-# system, and so shouldn't trigger E1101 when accessed. Python regular
-# expressions are accepted.
-generated-members=
-
-# Tells whether missing members accessed in mixin class should be ignored. A
-# mixin class is detected if its name ends with "mixin" (case insensitive).
-ignore-mixin-members=yes
-
-# This flag controls whether pylint should warn about no-member and similar
-# checks whenever an opaque object is returned when inferring. The inference
-# can return multiple potential results while evaluating a Python object, but
-# some branches might not be evaluated, which results in partial inference. In
-# that case, it might be useful to still emit no-member and other checks for
-# the rest of the inferred objects.
-ignore-on-opaque-inference=yes
-
-# List of class names for which member attributes should not be checked (useful
-# for classes with dynamically set attributes). This supports the use of
-# qualified names.
-ignored-classes=optparse.Values,thread._local,_thread._local
-
-# List of module names for which member attributes should not be checked
-# (useful for modules/projects where namespaces are manipulated during runtime
-# and thus existing member attributes cannot be deduced by static analysis. It
-# supports qualified module names, as well as Unix pattern matching.
-ignored-modules=
-
-# Show a hint with possible names when a member name was not found. The aspect
-# of finding the hint is based on edit distance.
-missing-member-hint=yes
-
-# The minimum edit distance a name should have in order to be considered a
-# similar match for a missing member name.
-missing-member-hint-distance=1
-
-# The total number of similar names that should be taken in consideration when
-# showing a hint for a missing member.
-missing-member-max-choices=1
-
-
-[MISCELLANEOUS]
-
-# List of note tags to take in consideration, separated by a comma.
-notes=FIXME,XXX,TODO
-
-
-[LOGGING]
-
-# Logging modules to check that the string format arguments are in logging
-# function parameter format
-logging-modules=logging
-
-
-[BASIC]
-
-# Naming hint for argument names
-argument-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Regular expression matching correct argument names
-argument-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Naming hint for attribute names
-attr-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Regular expression matching correct attribute names
-attr-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Bad variable names which should always be refused, separated by a comma
-bad-names=foo,bar,baz,toto,tutu,tata
-
-# Naming hint for class attribute names
-class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
-
-# Regular expression matching correct class attribute names
-class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
-
-# Naming hint for class names
-class-name-hint=[A-Z_][a-zA-Z0-9]+$
-
-# Regular expression matching correct class names
-class-rgx=[A-Z_][a-zA-Z0-9]+$
-
-# Naming hint for constant names
-const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
-
-# Regular expression matching correct constant names
-const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__)|(urls|urlpatterns|register))$
-
-# Minimum line length for functions/classes that require docstrings, shorter
-# ones are exempt.
-docstring-min-length=-1
-
-# Naming hint for function names
-function-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Regular expression matching correct function names
-function-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Good variable names which should always be accepted, separated by a comma
-good-names=i,j,k,ex,Run,_,qs
-
-# Include a hint for the correct naming format with invalid-name
-include-naming-hint=no
-
-# Naming hint for inline iteration names
-inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
-
-# Regular expression matching correct inline iteration names
-inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
-
-# Naming hint for method names
-method-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Regular expression matching correct method names
-method-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Naming hint for module names
-module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
-
-# Regular expression matching correct module names
-module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
-
-# Colon-delimited sets of names that determine each other's naming style when
-# the name regexes allow several styles.
-name-group=
-
-# Regular expression which should only match function or class names that do
-# not require a docstring.
-no-docstring-rgx=^_
-
-# List of decorators that produce properties, such as abc.abstractproperty. Add
-# to this list to register other decorators that produce valid properties.
-property-classes=abc.abstractproperty
-
-# Naming hint for variable names
-variable-name-hint=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-# Regular expression matching correct variable names
-variable-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
-
-
-[FORMAT]
-
-# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
-expected-line-ending-format=
-
-# Regexp for a line that is allowed to be longer than the limit.
-ignore-long-lines=^\s*(# )?<?https?://\S+>?$
-
-# Number of spaces of indent required inside a hanging or continued line.
-indent-after-paren=4
-
-# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
-# tab).
-indent-string=' '
-
-# Maximum number of characters on a single line.
-max-line-length=100
-
-# Maximum number of lines in a module
-max-module-lines=1000
-
-# List of optional constructs for which whitespace checking is disabled. `dict-
-# separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}.
-# `trailing-comma` allows a space between comma and closing bracket: (a, ).
-# `empty-line` allows space-only lines.
-no-space-check=trailing-comma,dict-separator
-
-# Allow the body of a class to be on the same line as the declaration if body
-# contains single statement.
-single-line-class-stmt=no
-
-# Allow the body of an if to be on the same line as the test if there is no
-# else.
-single-line-if-stmt=no
-
-
-[VARIABLES]
-
-# List of additional names supposed to be defined in builtins. Remember that
-# you should avoid to define new builtins when possible.
-additional-builtins=
-
-# Tells whether unused global variables should be treated as a violation.
-allow-global-unused-variables=yes
-
-# List of strings which can identify a callback function by name. A callback
-# name must start or end with one of those strings.
-callbacks=cb_,_cb
-
-# A regular expression matching the name of dummy variables (i.e. expectedly
-# not used).
-dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
-
-# Argument names that match this expression will be ignored. Default to name
-# with leading underscore
-ignored-argument-names=_.*|^ignored_|^unused_
-
-# Tells whether we should check for unused import in __init__ files.
-init-import=no
-
-# List of qualified module names which can have objects that can redefine
-# builtins.
-redefining-builtins-modules=six.moves,future.builtins
-
-
-[DESIGN]
-
-# Maximum number of arguments for function / method
-max-args=5
-
-# Maximum number of attributes for a class (see R0902).
-max-attributes=7
-
-# Maximum number of boolean expressions in a if statement
-max-bool-expr=5
-
-# Maximum number of branch for function / method body
-max-branches=12
-
-# Maximum number of locals for function / method body
-max-locals=15
-
-# Maximum number of parents for a class (see R0901).
-max-parents=7
-
-# Maximum number of public methods for a class (see R0904).
-max-public-methods=20
-
-# Maximum number of return / yield for function / method body
-max-returns=6
-
-# Maximum number of statements in function / method body
-max-statements=50
-
-# Minimum number of public methods for a class (see R0903).
-min-public-methods=2
-
-
-[CLASSES]
-
-# List of method names used to declare (i.e. assign) instance attributes.
-defining-attr-methods=__init__,__new__,setUp
-
-# List of member names, which should be excluded from the protected access
-# warning.
-exclude-protected=_asdict,_fields,_replace,_source,_make
-
-# List of valid names for the first argument in a class method.
-valid-classmethod-first-arg=cls
-
-# List of valid names for the first argument in a metaclass class method.
-valid-metaclass-classmethod-first-arg=mcs
-
-
-[IMPORTS]
-
-# Allow wildcard imports from modules that define __all__.
-allow-wildcard-with-all=no
-
-# Analyse import fallback blocks. This can be used to support both Python 2 and
-# 3 compatible code, which means that the block might have code that exists
-# only in one or another interpreter, leading to false positives when analysed.
-analyse-fallback-blocks=no
-
-# Deprecated modules which should not be used, separated by a comma
-deprecated-modules=optparse,tkinter.tix
-
-# Create a graph of external dependencies in the given file (report RP0402 must
-# not be disabled)
-ext-import-graph=
-
-# Create a graph of every (i.e. internal and external) dependencies in the
-# given file (report RP0402 must not be disabled)
-import-graph=
-
-# Create a graph of internal dependencies in the given file (report RP0402 must
-# not be disabled)
-int-import-graph=
-
-# Force import order to recognize a module as part of the standard
-# compatibility libraries.
-known-standard-library=
-
-# Force import order to recognize a module as part of a third party library.
-known-third-party=enchant
-
-
-[EXCEPTIONS]
-
-# Exceptions that will emit a warning when being caught. Defaults to
-# "Exception"
-overgeneral-exceptions=Exception
diff --git a/gnu/release-template.txt b/sign-gnu-artefact/release-template.txt
similarity index 100%
rename from gnu/release-template.txt
rename to sign-gnu-artefact/release-template.txt
diff --git a/gnu/sign-gnu-artefact b/sign-gnu-artefact/sign-gnu-artefact
similarity index 100%
rename from gnu/sign-gnu-artefact
rename to sign-gnu-artefact/sign-gnu-artefact
diff --git a/gnu/upload-gnu-artefact b/sign-gnu-artefact/upload-gnu-artefact
similarity index 100%
rename from gnu/upload-gnu-artefact
rename to sign-gnu-artefact/upload-gnu-artefact
diff --git a/systemd-services/buildbot-worker-linkchecker.service
b/systemd-services/buildbot-worker-linkchecker.service
index 5e4a58f..f60c5e3 100644
--- a/systemd-services/buildbot-worker-linkchecker.service
+++ b/systemd-services/buildbot-worker-linkchecker.service
@@ -1,12 +1,14 @@
[Unit]
-Description=Buildbot worker service for doc
-AssertPathExists=/home/linkchecker/worker
+Description=Buildbot worker service for checking for dead links
+AssertPathExists=/home/linkchecker-worker/worker
[Service]
-WorkingDirectory=/home/linkchecker/
-ExecStart=/usr/bin/buildbot-worker start --nodaemon worker
-ExecReload=/usr/bin/buildbot-worker restart --nodaemon worker
-ExecStop=/usr/bin/buildbot-worker stop worker
+User=linkchecker-worker
+Group=linkchecker-worker
+WorkingDirectory=~
+ExecStart=/home/linkchecker-worker/.local/buildbot-worker start --nodaemon
worker
+ExecReload=/home/linkchecker-worker/.local/buildbot-worker restart --nodaemon
worker
+ExecStop=/home/linkchecker-worker/.local/buildbot-worker stop worker
Restart=always
[Install]
diff --git a/systemd-services/buildbot-worker-sites.service
b/systemd-services/buildbot-worker-sites.service
index 620cfcd..f00932b 100644
--- a/systemd-services/buildbot-worker-sites.service
+++ b/systemd-services/buildbot-worker-sites.service
@@ -1,12 +1,14 @@
[Unit]
-Description=Buildbot worker service for sites
-AssertPathExists=/home/taler-websites/worker
+Description=Buildbot worker service for updating the Web sites
+AssertPathExists=/home/sites-worker/worker
[Service]
-WorkingDirectory=/home/taler-websites/
-ExecStart=/usr/bin/buildbot-worker start --nodaemon worker
-ExecReload=/usr/bin/buildbot-worker restart --nodaemon worker
-ExecStop=/usr/bin/buildbot-worker stop worker
+User=sites-worker
+Group=sites-worker
+WorkingDirectory=~
+ExecStart=/home/sites-worker/.local/bin/buildbot-worker start --nodaemon worker
+ExecReload=/home/sites-worker/.local/bin/buildbot-worker restart --nodaemon
worker
+ExecStop=/home/sites-worker/.local/bin/buildbot-worker stop worker
Restart=always
[Install]
diff --git a/codecoverage/coverage.sh b/worker-codecoverage/coverage.sh
similarity index 100%
rename from codecoverage/coverage.sh
rename to worker-codecoverage/coverage.sh
diff --git a/codecoverage/run-coverage-helper.sh
b/worker-codecoverage/run-coverage-helper.sh
similarity index 100%
rename from codecoverage/run-coverage-helper.sh
rename to worker-codecoverage/run-coverage-helper.sh
diff --git a/buildbot/linkchecker.Containerfile
b/worker-linkchecker/linkchecker.Containerfile
similarity index 100%
rename from buildbot/linkchecker.Containerfile
rename to worker-linkchecker/linkchecker.Containerfile
diff --git a/buildbot/linkchecker.sh b/worker-linkchecker/linkchecker.sh
similarity index 90%
rename from buildbot/linkchecker.sh
rename to worker-linkchecker/linkchecker.sh
index 24c90a0..0a0236c 100755
--- a/buildbot/linkchecker.sh
+++ b/worker-linkchecker/linkchecker.sh
@@ -20,7 +20,7 @@ if [ -f "$logfile" ]
echo "Info: existing log file '$logfile' not found."
fi
-podman build -t linkchecker:latest -f
"$HOME/deployment/buildbot/linkchecker.Containerfile"
"$HOME/deployment/buildbot"
+podman build -t linkchecker:latest -f
"$HOME/deployment/worker-linkchecker/linkchecker.Containerfile"
"$HOME/deployment/worker-linkchecker"
# Use wget to scan hosts and save output
for url in "https://www.taler.net/" "https://docs.taler.net/"
"https://taler-systems.com/" "https://demo.taler.net/"
"https://bank.demo.taler.net/" "https://shop.demo.taler.net/"
"https://donations.demo.taler.net/" ; do
diff --git a/buildbot/linkcheckerrc b/worker-linkchecker/linkcheckerrc
similarity index 100%
rename from buildbot/linkcheckerrc
rename to worker-linkchecker/linkcheckerrc
diff --git a/taler-sitesbuild/Makefile b/worker-sites/Makefile
similarity index 89%
rename from taler-sitesbuild/Makefile
rename to worker-sites/Makefile
index 30cd033..5cde2a2 100644
--- a/taler-sitesbuild/Makefile
+++ b/worker-sites/Makefile
@@ -1,4 +1,4 @@
-BASE="${HOME}/deployment/taler-sitesbuild"
+BASE="${HOME}/deployment/worker-sitesbuild"
all: www.taler.net-stamp
all: twister.taler.net-stamp
diff --git a/taler-sitesbuild/invalidate.sh b/worker-sites/invalidate.sh
similarity index 100%
rename from taler-sitesbuild/invalidate.sh
rename to worker-sites/invalidate.sh
diff --git a/taler-sitesbuild/update_buywith_page.sh
b/worker-sites/update_buywith_page.sh
similarity index 100%
rename from taler-sitesbuild/update_buywith_page.sh
rename to worker-sites/update_buywith_page.sh
diff --git a/taler-sitesbuild/update_stage.sh b/worker-sites/update_stage.sh
similarity index 100%
rename from taler-sitesbuild/update_stage.sh
rename to worker-sites/update_stage.sh
diff --git a/taler-sitesbuild/update_twister_page.sh
b/worker-sites/update_twister_page.sh
similarity index 100%
rename from taler-sitesbuild/update_twister_page.sh
rename to worker-sites/update_twister_page.sh
diff --git a/taler-sitesbuild/update_www.sh b/worker-sites/update_www.sh
similarity index 100%
rename from taler-sitesbuild/update_www.sh
rename to worker-sites/update_www.sh
--
To stop receiving notification emails like this one, please contact
gnunet@gnunet.org.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [taler-deployment] branch master updated: -more deployment git cleanups,
gnunet <=