gpsd-dev
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gpsd-dev] GR-701W hangs on Pi-3

From: Frank Nicholas
Subject: Re: [gpsd-dev] GR-701W hangs on Pi-3
Date: Fri, 3 Jun 2016 09:57:50 -0400 
Another quick note regarding power & the Raspberry Pi B+, 2 & 3 - the red Power 
LED will turn off to indicate if voltage drops below 4.63V.  The Pi MIGHT 
continue to function Ok, but this is a clear indication of a power issue.

It might be a good thing to point out in the HowTo that if the power LED is 
flickering, or not staying on solid, then the power supply or power cable is 
not adequate.
reply via email to
[Prev in Thread] Current Thread [Next in Thread]