[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ubxtool port?
From: |
Gary E. Miller |
Subject: |
Re: ubxtool port? |
Date: |
Wed, 6 May 2020 12:13:13 -0700 |
Yo John!
On Wed, 6 May 2020 15:01:41 -0400
John Ackermann N8UR <address@hidden> wrote:
> On 5/6/20 2:33 PM, Fred Wright wrote:
>
> > You can configure any port - see the -i option. Be sure ubxtool is
> > connecting *directly* to the receiver, rather than through GPSD, as
> > driver_ubx has a bunch of confused crap relating to the port ID.
> > You may or may not need to save the settings in the receiver and
> > tell GPSD to leave them alone with -b.
> >
> > Fred Wright
> >
>
> Ah, that may be it, then -- I was running through gpsd and I wasn't
> specifying port. What is the format for the -i? "USB", "UART",
> "UART1", etc.? And what is the default? (Neither is mentioned in the
> manpage.)
The ZED-F9P doc is over 270 pages. No room to fir that in the ubxtool
mand page.
You need to look at the u-blox doc for the decimal and hex values to use.
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can't measure it, you can't improve it." - Lord Kelvin
pgpKNMYm_pKSd.pgp
Description: OpenPGP digital signature
- ubxtool port?, John Ackermann N8UR, 2020/05/06
- Re: ubxtool port?, Fred Wright, 2020/05/06
- Re: ubxtool port?, John Ackermann N8UR, 2020/05/06
- Re: ubxtool port?,
Gary E. Miller <=
- Re: ubxtool port?, John Ackermann N8UR, 2020/05/06
- Re: ubxtool port?, Gary E. Miller, 2020/05/06
- ubxtool set GLONASS L1/L2, John Ackermann N8UR, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, Gary E. Miller, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, Gary E. Miller, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, John Ackermann N8UR, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, John Ackermann N8UR, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, Gary E. Miller, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, John Ackermann N8UR, 2020/05/06
- Re: ubxtool set GLONASS L1/L2, Gary E. Miller, 2020/05/06