Re: ✘gpscsv

[Andreas B]

Gary,

It's working - thank you so much!

Best,
Andreas

On Fri, Aug 28, 2020 at 6:49 PM Gary E. Miller <gem@rellim.com> wrote:
>
> Yo Andreas!
>
> On Fri, 28 Aug 2020 11:37:48 +0200
> Andreas B <panden@gmail.com> wrote:
>
> > I've enabled subframes with
> >     ~ # ubxtool -e SFRBX
>
> And you used the proper -P XX setting and you got an ACK?
>
> > but I'm confused how I increase the speed.
>
> See "man gpsctl":
>
>     "-s Set the baud rate at which the GPS emits packets."
>
> So:
>
>     # gpsctl -s 38400
>
> > It's 9600 at the moment,
> > and I figured I would try to set it to 38400. Any other
> > recommendations? I'm connected with the F9P with USB if it matters.
>
> The F9P has integrated USB, no USB to serial converter involved.  So
> no serial port to change the speed of.
>
> > So I try with
> >     ubxtool -S 38400
>
> That works too, on a serial port, not an integrated USB port.
>
> > but when I connect to it still says
>     [....] "bps":9600 [....]
>
> The driver is pretending it has a speed so as not to confuse older programs
> that do not understand.
>
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
>         gem@rellim.com  Tel:+1 541 382 8588
>
>             Veritas liberabit vos. -- Quid est veritas?
>     "If you can't measure it, you can't improve it." - Lord Kelvin