Re: Low cost GPS receiver?

[Sanjeev Gupta]

Gary, once an year, I ask for this, often on this list.

The "problem" I see with most modules like these is the UART voltage.  (Nearly) all are designed for Aurdino, so they work on 3.3V (TTL?) logic.  I think HAL would like to plug this into an RS-232 port in a "server", so he needs the +12/-12V signals.

I don't see those products under $200 :-(

--
Sanjeev Gupta
+65 98551208     http://www.linkedin.com/in/ghane

On Thu, 30 Mar 2023 at 07:08, Gary E. Miller <gem@rellim.com> wrote:

Yo Hal!

On Wed, 29 Mar 2023 15:07:07 -0700
Hal Murray <halmurray@sonic.net> wrote:

> Is there a popular low cost GPS receiver that requires (at most) only
> moderate amounts of soldering?

Ebay has many under $10:

https://www.ebay.com/itm/275756616309

https://www.ebay.com/itm/373651892261

https://www.ebay.com/itm/174653466203

Try to avoid anything older than u-blox 8.





RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        gem@rellim.com  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin