[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[gpsd-users] gpsd fails with Illegal instruction on old Intel CPU
From: |
Klaus Klein |
Subject: |
[gpsd-users] gpsd fails with Illegal instruction on old Intel CPU |
Date: |
Fri, 30 Dec 2011 00:33:39 +0100 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.16) Gecko/20111110 Icedove/3.0.11 |
Hi Folks,
I just installed gpsd 3.3-5 under Debian GNU/Linux wheezy/sid
(3.1.0-1-686-pae) on my old Dell Notebook.
/proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 11
model name : Intel(R) Pentium(R) III Mobile CPU 933MHz
stepping : 1
cpu MHz : 930.110
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pse36 mmx fxsr sse up
bogomips : 1860.22
clflush size : 32
cache_alignment : 32
address sizes : 36 bits physical, 32 bits virtual
power management:
||/ Name Version Description
+++-=======-========-==================================
ii gpsd 3.3-5 Global Positioning System - daemon
new debian package, version 2.0.
size 102912 bytes: control archive= 13630 bytes.
17 bytes, 1 lines conffiles
2885 bytes, 123 lines * config #!/bin/sh
975 bytes, 23 lines control
878 bytes, 14 lines md5sums
2039 bytes, 78 lines * postinst #!/bin/bash
640 bytes, 33 lines * postrm #!/bin/sh
1217 bytes, 49 lines * preinst #!/bin/sh
163 bytes, 7 lines * prerm #!/bin/sh
25161 bytes, 290 lines templates
Package: gpsd
Version: 3.3-5
Architecture: i386
Maintainer: Bernd Zeimetz <address@hidden>
Installed-Size: 214
Depends: netbase, lsb-base (>= 3.2-13), libbluetooth3 (>= 4.91), libc6 (>= 2.11),
libdbus-1-3 (>= 1.0.2), libgps20 (>= 3.3), libusb-1.0-0 (>= 2:1.0.8), debconf (>= 0.5) |
debconf-2.0
Recommends: udev, python
Suggests: gpsd-clients, dbus
Conflicts: fso-gpsd
Breaks: udev (<< 125)
Section: misc
Priority: optional
Multi-Arch: foreign
Homepage: http://www.catb.org/gpsd/
Unfortunately the start of gpsd ends with an "Illegal instruction".
address@hidden:~# /usr/sbin/gpsd -D 5 -N -n /dev/ttyS0
gpsd:INFO: launching (Version 3.3)
gpsd:IO: opening IPv4 socket
gpsd:IO: opening IPv6 socket
gpsd:ERROR: can't bind to IPv6 port gpsd, Cannot assign requested address
gpsd:INFO: listening on port gpsd
gpsd:PROG: NTPD shmat(0,0,0) succeeded, segment 0
gpsd:PROG: NTPD shmat(32769,0,0) succeeded, segment 1
gpsd:PROG: NTPD shmat(65538,0,0) succeeded, segment 2
gpsd:PROG: NTPD shmat(98307,0,0) succeeded, segment 3
gpsd:PROG: successfully connected to the DBUS system bus
gpsd:PROG: shmat() succeeded, segment 131076
gpsd:PROG: shared-segment creation succeeded,
gpsd:INFO: NTPD ntpd_link_activate: 1
gpsd:INFO: stashing device /dev/ttyS0 at slot 0
gpsd:PROG: no etc/gpsd/device-hook present, skipped running ACTIVATE hook
gpsd:INFO: opening GPS data source type 2 at '/dev/ttyS0'
gpsd:PROG: PPS Create Thread gpsd_ppsmonitor
gpsd:PROG: PPS chrony socket /var/run/chrony.ttyS0.sock doesn't exist
gpsd:INFO: speed 4800, 8N1
gpsd:IO: => GPS: $PASHQ,RID*28\x0d\x0a
gpsd:IO: => GPS: @F0.3=1*67\x0d\x0a
gpsd:IO: => GPS: @F2.2=1*64\x0d\x0a
gpsd:IO: writing oncore control type Cj
gpsd:IO: => GPS: @@Cj)\x0d\x0aRID*28\x0d\x0a
gpsd:PROG: Probing "Garmin USB binary" driver...
gpsd:PROG: Probe not found "Garmin USB binary" driver...
gpsd:PROG: Probing "GeoStar binary" driver...
gpsd:IO: Sent GeoStar packet id 0xc1
gpsd:IO: => GPS: 5053474700c100010000000050924746
gpsd:PROG: Probe not found "GeoStar binary" driver...
gpsd:PROG: Probing "Trimble TSIP" driver...
gpsd:INFO: speed 9600, 8O1
gpsd:IO: => GPS: $PASHQ,RID*28\x0d\x0a
gpsd:IO: => GPS: @F0.3=1*67\x0d\x0a
gpsd:IO: => GPS: @F2.2=1*64\x0d\x0a
gpsd:IO: writing oncore control type Cj
gpsd:IO: => GPS: @@Cj)\x0d\x0aRID*28\x0d\x0a
gpsd:INFO: speed 4800, 8N1
gpsd:IO: => GPS: $PASHQ,RID*28\x0d\x0a
gpsd:IO: => GPS: @F0.3=1*67\x0d\x0a
gpsd:IO: => GPS: @F2.2=1*64\x0d\x0a
gpsd:IO: writing oncore control type Cj
gpsd:IO: => GPS: @@Cj)\x0d\x0aRID*28\x0d\x0a
gpsd:PROG: Probe not found "Trimble TSIP" driver...
gpsd:PROG: no probe matched...
gpsd:INFO: gpsd_activate(): activated GPS (fd 6)
gpsd:INFO: device /dev/ttyS0 activated
gpsd:PROG: changing to group 20
gpsd:INFO: running with effective group ID 20
gpsd:INFO: running with effective user ID 65534
gpsd:INFO: startup at 2011-12-29T23:16:30.000Z (1325200590)
gpsd:PROG: switch_driver(Generic NMEA) called...
gpsd:PROG: selecting Generic NMEA driver...
gpsd:INFO: /dev/ttyS0 identified as type Generic NMEA (0.126615 sec @ 4800bps)
gpsd:PROG: => Probing for Garmin NMEA
gpsd:IO: => GPS: $PGRMCE*0E\x0d\x0a
gpsd:IO: <= GPS: $GPVTG,359.04,T,,M,15.83,N,29.3,K,N*0E
gpsd:DATA: packet from /dev/ttyS0 with {ONLINE|PACKET|DRIVER}
gpsd:PROG: => Probing for SiRF
gpsd:IO: => GPS: $PSRF100,0,4800,8,1,0*0F\x0d\x0a
gpsd:IO: <= GPS:
$GPGGA,231639.000,5158.9982,N,00429.9442,E,1,03,50.0,-15.5,M,47.1,M,,0000*7F
gpsd:DATA: GPGGA: registers fractional time 231639.00
gpsd:WARN: can't use GGA time until after ZDA or RMC has supplied a year.
gpsd:DATA: GGA: hhmmss=231639.000 lat=51.98 lon=4.50 alt=-15.50 mode=3 status=1
gpsd:PROG: GPGGA reporting cycle started on 231639.00.
gpsd:PROG: GPGGA starts a reporting cycle.
gpsd:DATA: packet from /dev/ttyS0 with
{ONLINE|LATLON|ALTITUDE|STATUS|MODE|PACKET|CLEAR}
Illegal instruction
address@hidden:~#
Anything I could do to fix this?
Regards,
Klaus
- [gpsd-users] gpsd fails with Illegal instruction on old Intel CPU,
Klaus Klein <=