[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] access to UBX-CFG antenna status via gposd
From: |
tom |
Subject: |
Re: [gpsd-users] access to UBX-CFG antenna status via gposd |
Date: |
Tue, 13 Sep 2016 12:24:40 +1000 |
Hi Gary,
i think i send you in the wrong direction (because i didn't understand it )
UBX-CFG-ANT is just there to say that i am interested in the Antenna
Short Circuit data (when it occurs)
Then the MON-HW message can then be polled and the reply will contain
the Antenna Short Circuit flag.
Your anwer is still useful because i think i can add the UBX-CFG-ANT
to the startup and then i need to send a periodic MON-HW using gpsctrl
.
How would i catch the MON-HW response data myself ? do i need to
register a raw_hook using gps_set_raw_hook() ?
thanks,
tom
On 13 September 2016 at 11:58, Gary E. Miller <address@hidden> wrote:
>
> Yo tom!
>
> On Mon, 12 Sep 2016 15:15:58 +1000
> tom <address@hidden> wrote:
>
> > we are talking to a U-Blox 6S/6R via gpsd and i was wondering how i
> > would go abouts in getting access to some of the UBlox specific data
> > that gets reported via UBX-CFG (such as antenna state).
>
> Right now gpsd mostly concerns itself with parsing the data that the
> GPS periodically sends out on its own. gpsd mostly wait
> passively for whatever data it gets.
>
> This would be something that needs to be requested. When gpsd starts
> up, it polls some GPS for some configuration data. A request for
> UBX-CFG could be added to the startup code.
>
> I see that there is no specifi U X-CFG message, but a number of them:
>
> UBX-CFG-PRT
> UBX-CFG-USB
> UBX-CFG-MSG
> UBX-CFG-INF
> UBX-CFG-NAV5
> UBX-CFG-DAT
> UBX-CFG-RATE
> UBX-CFG-SBAS
> UBX-CFG-NMEA
> UBX-CFG-TMODE
> UBX-CFG-TP
> UBX-CFG-ANT
>
> I assume you want UBX-CFG-ANT? Looks like you send the CFG-ANT poll
> and get back a CFG-ANT?
>
> > Is there a generic way of accessing manufacturer specific binary data.
>
> Sort of. You can use gpsctl to send arbitrary data to the GPS, and
> just look at the raw data back for the answer. Then ading a UBX-CFG-ANT
> decoder would be easy, just need to get the GPS to send it.
>
> Sadly the gpsctl method is not well documented. gosd needs to add a
> lot of device specific instructions on how to use gpsctl.
>
> > i understand that gpsd is supposed to add a 'generic' layer on top of
> > these manufacturer specific implementations , but we do like the
> > 'multiplexer' functionality of gpsd so we don't really want to move
> > away from it, if possible.
>
> You can mix and match looking at decoded and raw results.
>
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
> address@hidden Tel:+1 541 382 8588
--
my public key