[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
GPSD does not see Galileo
From: |
David Taylor |
Subject: |
GPSD does not see Galileo |
Date: |
Thu, 21 Jan 2021 17:01:18 +0000 |
User-agent: |
Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:78.0) Gecko/20100101 Thunderbird/78.6.1 |
Compiled cgps: 3.22.1~dev (revision release-3.22-46-gc36433084) and all
seems to be running OK, with one exception - I can't get Galileo to
work! I'm using the same hardware and GPS/RTC device as before (a
second set), and whilst I can use ubxtool to enable and disable GLONASS
(for example), the same commands don't appear to work for GALILEO. I'm
puzzled because ubxtool seems to think it's enabled if I'm reading the
output correctly:
UBX-CFG-GNSS:
msgVer 0 numTrkChHw 32 numTrkChUse 32 numConfigBlocks 7
gnssId 0 TrkCh 8 maxTrCh 16 reserved 0 Flags x01010001
GPS L1C/A enabled
gnssId 1 TrkCh 1 maxTrCh 3 reserved 0 Flags x01010001
SBAS L1C/A enabled
gnssId 2 TrkCh 4 maxTrCh 8 reserved 0 Flags x01010001
Galileo E1 enabled
gnssId 3 TrkCh 8 maxTrCh 16 reserved 0 Flags x01010000
BeiDou B1I
gnssId 4 TrkCh 0 maxTrCh 8 reserved 0 Flags x03010000
IMES L1
gnssId 5 TrkCh 0 maxTrCh 3 reserved 0 Flags x05010001
QZSS L1C/A enabled
gnssId 6 TrkCh 8 maxTrCh 14 reserved 0 Flags x01010001
GLONASS L1 enabled
Full output attached.
I've left it running for many minutes, enough for a full almanac
download. The antenna is a standard one, working on GPS and GLONASS.
I've used ubxtool reset, power resets. What am I missing?
Thanks,
David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@blueyonder.co.uk
Twitter: @gm8arv
_temp.txt
Description: Text document
- GPSD does not see Galileo,
David Taylor <=