[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

sgi O2 supported?

From: Waldemar Brodkorb
Subject: sgi O2 supported?
Date: Sat, 7 Jan 2017 20:34:19 +0100
User-agent: Mutt/1.5.23 (2014-03-12)


can I use grub to bootup Linux/mips64 from SCSI disk on a
SGI O2 machine?

I cross-compiled grub (git hash
The toolchain is fine, I can bootup a Linux system via TFTP.

I create a grub.img with following modules included:
boot linux ext2 part_dvh normal

I copy grub.img with dvhtool to the volume header and
try to bootup:

> setenv OSLoader grub
> boot
Cannot load scsi(0)disk(1)rdisk(0)partition(8)/grub.
Range check failure: text start 0x881ffde0, size 0x53478.
Text section would overwrite an already loaded program.Unable to
execute scsi(0)disk(1)rdisk(0)partition(8)/grub:  not enough space
Unable to load scsi(0)disk(1)rdisk(0)partition(8)/grub: not enough

Seems like the load address is bad?

Is it possible to use grub for this task?

best regards

reply via email to

[Prev in Thread] Current Thread [Next in Thread]