[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v3 3/7] efi: implemented LoadFile2 initrd loading protocol for Li
From: |
Nikita Ermakov |
Subject: |
[PATCH v3 3/7] efi: implemented LoadFile2 initrd loading protocol for Linux |
Date: |
Thu, 28 Oct 2021 23:31:16 +0300 |
From: Ard Biesheuvel <ard.biesheuvel@arm.com>
Recent Linux kernels will invoke the LoadFile2 protocol installed on
a well-known vendor media path to load the initrd if it is exposed by
the firmware. Using this method is preferred for two reasons:
- the Linux kernel is in charge of allocating the memory, and so it can
implement any placement policy it wants (given that these tend to
change between kernel versions),
- it is no longer necessary to modify the device tree provided by the
firmware.
So let's install this protocol when handling the 'initrd' command if
such a recent kernel was detected (based on the PE/COFF image version),
and defer loading the initrd contents until the point where the kernel
invokes the LoadFile2 protocol.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Nikita Ermakov <arei@altlinux.org>
---
grub-core/loader/arm64/linux.c | 117 ++++++++++++++++++++++++++++++++-
1 file changed, 116 insertions(+), 1 deletion(-)
diff --git a/grub-core/loader/arm64/linux.c b/grub-core/loader/arm64/linux.c
index aed7a200b..6b03455d1 100644
--- a/grub-core/loader/arm64/linux.c
+++ b/grub-core/loader/arm64/linux.c
@@ -48,9 +48,18 @@ static grub_uint32_t cmdline_size;
static grub_addr_t initrd_start;
static grub_addr_t initrd_end;
+static struct grub_linux_initrd_context initrd_ctx = { 0, 0, 0 };
+static grub_efi_handle_t initrd_lf2_handle;
+static int initrd_use_loadfile2;
+static grub_efi_guid_t load_file2_guid = GRUB_EFI_LOAD_FILE2_PROTOCOL_GUID;
+static grub_efi_guid_t device_path_guid = GRUB_EFI_DEVICE_PATH_GUID;
+
grub_err_t
grub_arch_efi_linux_check_image (struct linux_arch_kernel_header * lh)
{
+ struct grub_pe32_coff_header *coff_header;
+ struct grub_pe32_optional_header *optional_header;
+
if (lh->magic != GRUB_LINUX_ARMXX_MAGIC_SIGNATURE)
return grub_error(GRUB_ERR_BAD_OS, "invalid magic number");
@@ -61,6 +70,21 @@ grub_arch_efi_linux_check_image (struct
linux_arch_kernel_header * lh)
grub_dprintf ("linux", "UEFI stub kernel:\n");
grub_dprintf ("linux", "PE/COFF header @ %08x\n", lh->hdr_offset);
+ coff_header = (struct grub_pe32_coff_header *)((unsigned long)lh +
lh->hdr_offset);
+ optional_header = (struct grub_pe32_optional_header *)(coff_header + 1);
+
+ /*
+ * Linux kernels built for any architecture are guaranteed to support the
+ * LoadFile2 based initrd loading protocol if the image version is >= 1.
+ */
+ if (optional_header->major_image_version >= 1)
+ initrd_use_loadfile2 = 1;
+ else
+ initrd_use_loadfile2 = 0;
+
+ grub_dprintf ("linux", "LoadFile2 initrd loading %sabled\n",
+ initrd_use_loadfile2 ? "en" : "dis");
+
return GRUB_ERR_NONE;
}
@@ -230,13 +254,86 @@ allocate_initrd_mem (int initrd_pages)
GRUB_EFI_LOADER_DATA);
}
+struct initrd_media_device_path {
+ grub_efi_vendor_media_device_path_t vendor;
+ grub_efi_device_path_t end;
+} GRUB_PACKED;
+
+#define LINUX_EFI_INITRD_MEDIA_GUID \
+ { 0x5568e427, 0x68fc, 0x4f3d, \
+ { 0xac, 0x74, 0xca, 0x55, 0x52, 0x31, 0xcc, 0x68 } \
+ }
+
+static struct initrd_media_device_path initrd_lf2_device_path = {
+ {
+ {
+ GRUB_EFI_MEDIA_DEVICE_PATH_TYPE,
+ GRUB_EFI_VENDOR_MEDIA_DEVICE_PATH_SUBTYPE,
+ sizeof(grub_efi_vendor_media_device_path_t),
+ },
+ LINUX_EFI_INITRD_MEDIA_GUID
+ }, {
+ GRUB_EFI_END_DEVICE_PATH_TYPE,
+ GRUB_EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ sizeof(grub_efi_device_path_t)
+ }
+};
+
+static grub_efi_status_t
+grub_efi_initrd_load_file2(grub_efi_load_file2_t *this,
+ grub_efi_device_path_t *device_path,
+ grub_efi_boolean_t boot_policy,
+ grub_efi_uintn_t *buffer_size,
+ void *buffer);
+
+static grub_efi_load_file2_t initrd_lf2 = {
+ grub_efi_initrd_load_file2
+};
+
+static grub_efi_status_t
+grub_efi_initrd_load_file2(grub_efi_load_file2_t *this,
+ grub_efi_device_path_t *device_path,
+ grub_efi_boolean_t boot_policy,
+ grub_efi_uintn_t *buffer_size,
+ void *buffer)
+{
+ grub_efi_status_t status = GRUB_EFI_SUCCESS;
+ grub_efi_uintn_t initrd_size;
+
+ if (!this || this != &initrd_lf2 || !buffer_size)
+ return GRUB_EFI_INVALID_PARAMETER;
+
+ if (device_path->type != GRUB_EFI_END_DEVICE_PATH_TYPE ||
+ device_path->subtype != GRUB_EFI_END_ENTIRE_DEVICE_PATH_SUBTYPE)
+ return GRUB_EFI_NOT_FOUND;
+
+ if (boot_policy)
+ return GRUB_EFI_UNSUPPORTED;
+
+ initrd_size = grub_get_initrd_size (&initrd_ctx);
+ if (!buffer || *buffer_size < initrd_size)
+ {
+ *buffer_size = initrd_size;
+ return GRUB_EFI_BUFFER_TOO_SMALL;
+ }
+
+ grub_dprintf ("linux", "Providing initrd via LOAD_FILE2_PROTOCOL\n");
+
+ if (grub_initrd_load (&initrd_ctx, buffer))
+ status = GRUB_EFI_LOAD_ERROR;
+
+ grub_initrd_close (&initrd_ctx);
+ return status;
+}
+
static grub_err_t
grub_cmd_initrd (grub_command_t cmd __attribute__ ((unused)),
int argc, char *argv[])
{
- struct grub_linux_initrd_context initrd_ctx = { 0, 0, 0 };
int initrd_size, initrd_pages;
void *initrd_mem = NULL;
+ grub_efi_boot_services_t *b;
+ grub_efi_status_t status;
if (argc == 0)
{
@@ -254,6 +351,24 @@ grub_cmd_initrd (grub_command_t cmd __attribute__
((unused)),
if (grub_initrd_init (argc, argv, &initrd_ctx))
goto fail;
+ if (initrd_use_loadfile2 && !initrd_lf2_handle)
+ {
+ b = grub_efi_system_table->boot_services;
+ status = b->install_multiple_protocol_interfaces (&initrd_lf2_handle,
+ &load_file2_guid,
+ &initrd_lf2,
+ &device_path_guid,
+ &initrd_lf2_device_path,
+ NULL);
+ if (status == GRUB_EFI_OUT_OF_RESOURCES)
+ {
+ grub_error (GRUB_ERR_OUT_OF_MEMORY, N_("out of memory"));
+ return grub_errno;
+ }
+ grub_dprintf ("linux", "LoadFile2 initrd loading protocol installed\n");
+ return GRUB_ERR_NONE;
+ }
+
initrd_size = grub_get_initrd_size (&initrd_ctx);
grub_dprintf ("linux", "Loading initrd\n");
--
2.33.1
- [PATCH v3 0/7] Add LoadFile2 and riscv Linux loader, Nikita Ermakov, 2021/10/28
- [PATCH v3 2/7] efi: add definition of LoadFile2 protocol, Nikita Ermakov, 2021/10/28
- [PATCH v3 7/7] RISC-V: Use common linux loader, Nikita Ermakov, 2021/10/28
- [PATCH v3 1/7] loader: drop argv[] argument in grub_initrd_load(), Nikita Ermakov, 2021/10/28
- [PATCH v3 6/7] RISC-V: Update image header, Nikita Ermakov, 2021/10/28
- [PATCH v3 3/7] efi: implemented LoadFile2 initrd loading protocol for Linux,
Nikita Ermakov <=
- [PATCH v3 5/7] loader: Move arm64 linux loader to common code, Nikita Ermakov, 2021/10/28
- [PATCH v3 4/7] linux: ignore FDT unless we need to modify it, Nikita Ermakov, 2021/10/28
- Re: [PATCH v3 0/7] Add LoadFile2 and riscv Linux loader, Heinrich Schuchardt, 2021/10/28