[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Using guile-scmutils with REPL and compilation

From: Vladimir Zhbanov
Subject: Re: Using guile-scmutils with REPL and compilation
Date: Thu, 9 Jul 2020 09:32:12 +0300
User-agent: Mutt/1.10.1 (2018-07-13)

On Thu, Jul 09, 2020 at 12:04:29AM +0300, Viacheslav Dushin wrote:


> >Another way is to just use:
> >scheme@(guile-user)> (primitive-load "/My/absolute/file/name.scm")
> What's the key difference between load and primitive-load? The docs are
> unclear.

AFAICS in the docs, under the hood, 'load' calls for
'primitive-load', it's a wrapper for it and may take an additional
argument, the "reader" procedure.  It's a subject to play with :-)


> Anyway thanks for your answer. I moved a bit forward with this code
> (add-to-load-path "/Users/slava/.guile.d/")
> (load  (%search-load-path  "guile-scmutils/src/load.scm"))
> (use-modules (generic-environment))
> Now it fails with the following error:
> ;;; note: source file
> /Users/slava/Documents/work/func-diff-geometry/prologue/code.scm
> ;;;       newer than compiled
> /Users/slava/.cache/guile/ccache/3.0-LE-8-4.3/Users/slava/Documents/work/func-diff-geometry/prologue/code.scm.go
> ;;; note: auto-compilation is enabled, set GUILE_AUTO_COMPILE=0
> ;;;       or pass the --no-auto-compile argument to disable.
> ;;; compiling
> /Users/slava/Documents/work/func-diff-geometry/prologue/code.scm
> ;;; WARNING: compilation of
> /Users/slava/Documents/work/func-diff-geometry/prologue/code.scm failed:
> ;;; no code for module (generic-environment)

Is there the file "generic-environment.scm" with the module
definition "(define-module (generic-environment) ...)" in the
'%load-path' visible within 'code.scm'?


> I think the main question is why REPL and compiler act differently.
> This code works ok inside the REPL but fails to compile:
> (add-to-load-path "/Users/slava/.guile.d/")
> (load  (%search-load-path  "guile-scmutils/src/load.scm"))
> (set-current-module generic-environment)
> (define ((Gamma w) t)
>   (up t (w t) ((D w) t)))

Maybe, different settings wrt '%load-path' and such in some config
files?  Or maybe some additional modules are loaded when the REPL
starts?  Check what '%load-path' and '(module-uses
(current-module))' return in both cases. (Dunno, if
'%load-compiled-path' can affect something in such a case.)



(λ)επτόν EDA —

reply via email to

[Prev in Thread] Current Thread [Next in Thread]