[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
01/01: gnu: u-boot: Update to 2019.01.
|
From: |
guix-commits |
|
Subject: |
01/01: gnu: u-boot: Update to 2019.01. |
|
Date: |
Sun, 3 Feb 2019 18:24:46 -0500 (EST) |
dannym pushed a commit to branch master
in repository guix.
commit 4da4e952ddf9823d115997dbfa3bb45c74ac7463
Author: Vagrant Cascadian <address@hidden>
Date: Wed Jan 16 15:21:52 2019 -0800
gnu: u-boot: Update to 2019.01.
* gnu/packages/bootloaders.scm (u-boot): Update to 2019.01.
(u-boot-tools): Disable CONFIG_SOUND in sandbox configs.
(u-boot-pinebook)[source]: Remove patches.
* gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch,
gnu/packages/patches/u-boot-pinebook-dts.patch,
gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch,
gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch,
gnu/packages/patches/u-boot-pinebook-syscon-node.patch,
gnu/packages/patches/u-boot-pinebook-video-bridge.patch: Delete files.
* gnu/local.mk (dist_patch_DATA): Adjust as necessary.
---
gnu/local.mk | 6 -
gnu/packages/bootloaders.scm | 24 +-
.../patches/u-boot-pinebook-a64-update-dts.patch | 1485 --------------------
gnu/packages/patches/u-boot-pinebook-dts.patch | 388 -----
.../patches/u-boot-pinebook-mmc-calibration.patch | 98 --
.../patches/u-boot-pinebook-r_i2c-controller.patch | 70 -
.../patches/u-boot-pinebook-syscon-node.patch | 38 -
.../patches/u-boot-pinebook-video-bridge.patch | 50 -
8 files changed, 8 insertions(+), 2151 deletions(-)
diff --git a/gnu/local.mk b/gnu/local.mk
index 84752f8..5759572 100644
--- a/gnu/local.mk
+++ b/gnu/local.mk
@@ -1281,12 +1281,6 @@ dist_patch_DATA =
\
%D%/packages/patches/totem-meson-easy-codec.patch \
%D%/packages/patches/tuxpaint-stamps-path.patch \
%D%/packages/patches/twinkle-include-qregexpvalidator.patch \
- %D%/packages/patches/u-boot-pinebook-a64-update-dts.patch \
- %D%/packages/patches/u-boot-pinebook-mmc-calibration.patch \
- %D%/packages/patches/u-boot-pinebook-r_i2c-controller.patch \
- %D%/packages/patches/u-boot-pinebook-dts.patch \
- %D%/packages/patches/u-boot-pinebook-syscon-node.patch \
- %D%/packages/patches/u-boot-pinebook-video-bridge.patch \
%D%/packages/patches/unzip-CVE-2014-8139.patch \
%D%/packages/patches/unzip-CVE-2014-8140.patch \
%D%/packages/patches/unzip-CVE-2014-8141.patch \
diff --git a/gnu/packages/bootloaders.scm b/gnu/packages/bootloaders.scm
index 0fbf481..5bd784f 100644
--- a/gnu/packages/bootloaders.scm
+++ b/gnu/packages/bootloaders.scm
@@ -376,7 +376,7 @@ tree binary files. These are board description files used
by Linux and BSD.")
(define u-boot
(package
(name "u-boot")
- (version "2018.11")
+ (version "2019.01")
(source (origin
(method url-fetch)
(uri (string-append
@@ -384,7 +384,7 @@ tree binary files. These are board description files used
by Linux and BSD.")
"u-boot-" version ".tar.bz2"))
(sha256
(base32
- "0znkwljfwwn4y7j20pzz4ilqw8znphrfxns0x1lwdzh3xbr96z3k"))))
+ "08hwsmh5xsb1gcxsv8gvx00bai938dm5y3889n8jif3a8rd7xgah"))))
(native-inputs
`(("bc" ,bc)
("bison" ,bison)
@@ -440,6 +440,11 @@ also initializes the boards (RAM etc).")
(("def test_ctrl_c")
"@pytest.mark.skip(reason='Guix has problems with SIGINT')
def test_ctrl_c"))
+ ;; This test requires a sound system, which is un-used in
u-boot-tools.
+ (for-each (lambda (file)
+ (substitute* file
+ (("CONFIG_SOUND=y") "CONFIG_SOUND=n")))
+ (find-files "configs" "sandbox_.*defconfig$"))
#t))
(replace 'configure
(lambda* (#:key make-flags #:allow-other-keys)
@@ -595,20 +600,7 @@ board-independent tools.")))
(make-u-boot-sunxi64-package "pine64_plus" "aarch64-linux-gnu"))
(define-public u-boot-pinebook
- (let ((base (make-u-boot-sunxi64-package "pinebook" "aarch64-linux-gnu")))
- (package
- (inherit base)
- (source (origin
- (inherit (package-source u-boot))
- (patches (search-patches
- ;; Add patches to enable Pinebook support from sunxi
- ;; maintainer tree: git://git.denx.de/u-boot-sunxi.git
- "u-boot-pinebook-a64-update-dts.patch"
- "u-boot-pinebook-syscon-node.patch"
- "u-boot-pinebook-mmc-calibration.patch"
- "u-boot-pinebook-video-bridge.patch"
- "u-boot-pinebook-r_i2c-controller.patch"
- "u-boot-pinebook-dts.patch")))))))
+ (make-u-boot-sunxi64-package "pinebook" "aarch64-linux-gnu"))
(define-public u-boot-bananapi-m2-ultra
(make-u-boot-package "Bananapi_M2_Ultra" "arm-linux-gnueabihf"))
diff --git a/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
b/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
deleted file mode 100644
index 9d0a08c..0000000
--- a/gnu/packages/patches/u-boot-pinebook-a64-update-dts.patch
+++ /dev/null
@@ -1,1485 +0,0 @@
-From 1b39a1834ed182bbd8036a5cd74a9ea111fa4691 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <address@hidden>
-Date: Mon, 29 Oct 2018 00:56:47 +0000
-Subject: [PATCH 03/13] sunxi: A64: Update .dts/.dtsi files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Update the .dts/.dtsi file from the Linux sunxi/dt64-for-4.20 tree:
-commit 679294497be31596e1c9c61507746d72b6b05f26
-Author: Rodrigo Exterckötter Tjäder <address@hidden>
-Date: Wed Sep 26 19:48:24 2018 +0000
- arm64: dts: allwinner: a64: a64-olinuxino: set the PHY TX delay
-
-Signed-off-by: Andre Przywara <address@hidden>
-Acked-by: Maxime Ripard <address@hidden>
-Reviewed-by: Jagan Teki <address@hidden>
----
- arch/arm/dts/sun50i-a64-amarula-relic.dts | 168 +++++++++++++-
- arch/arm/dts/sun50i-a64-bananapi-m64.dts | 34 ++-
- arch/arm/dts/sun50i-a64-nanopi-a64.dts | 89 +++++++-
- arch/arm/dts/sun50i-a64-olinuxino.dts | 103 ++++++++-
- arch/arm/dts/sun50i-a64-orangepi-win.dts | 179 ++++++++++++++-
- arch/arm/dts/sun50i-a64-pine64.dts | 32 ++-
- arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 32 ++-
- arch/arm/dts/sun50i-a64-sopine.dtsi | 15 ++
- arch/arm/dts/sun50i-a64.dtsi | 313 +++++++++++++++++++++++++--
- 9 files changed, 920 insertions(+), 45 deletions(-)
-
-diff --git a/arch/arm/dts/sun50i-a64-amarula-relic.dts
b/arch/arm/dts/sun50i-a64-amarula-relic.dts
-index f3b4e93ece..6cb2b7f0c8 100644
---- a/arch/arm/dts/sun50i-a64-amarula-relic.dts
-+++ b/arch/arm/dts/sun50i-a64-amarula-relic.dts
-@@ -22,11 +22,11 @@
- stdout-path = "serial0:115200n8";
- };
-
-- reg_vcc3v3: vcc3v3 {
-- compatible = "regulator-fixed";
-- regulator-name = "vcc3v3";
-- regulator-min-microvolt = <3300000>;
-- regulator-max-microvolt = <3300000>;
-+ wifi_pwrseq: wifi-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ clocks = <&rtc 1>;
-+ clock-names = "ext_clock";
-+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
- };
- };
-
-@@ -34,10 +34,34 @@
- status = "okay";
- };
-
-+&mmc1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc1_pins>;
-+ vmmc-supply = <®_dcdc1>;
-+ /*
-+ * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
-+ * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
-+ * 0Ohm register to vcc-io-wifi so eldo1 is used.
-+ */
-+ vqmmc-supply = <®_eldo1>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ brcmf: address@hidden {
-+ reg = <1>;
-+ compatible = "brcm,bcm4329-fmac";
-+ interrupt-parent = <&r_pio>;
-+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* WL-WAKE-AP: PL3 */
-+ interrupt-names = "host-wake";
-+ };
-+};
-+
- &mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
-- vmmc-supply = <®_vcc3v3>;
-+ vmmc-supply = <®_dcdc1>;
- bus-width = <8>;
- non-removable;
- cap-mmc-hw-reset;
-@@ -48,9 +72,138 @@
- status = "okay";
- };
-
-+&r_rsb {
-+ status = "okay";
-+
-+ axp803: address@hidden {
-+ compatible = "x-powers,axp803";
-+ reg = <0x3a3>;
-+ interrupt-parent = <&r_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
-+ };
-+};
-+
-+#include "axp803.dtsi"
-+
-+®_aldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ regulator-name = "avdd-csi";
-+};
-+
-+®_aldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-pl";
-+};
-+
-+®_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-name = "vcc-pll-avcc";
-+};
-+
-+®_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-3v3";
-+};
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1040000>;
-+ regulator-max-microvolt = <1300000>;
-+ regulator-name = "vdd-cpux";
-+};
-+
-+/* DCDC3 is polyphased with DCDC2 */
-+
-+®_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-name = "vcc-dram";
-+};
-+
-+®_dcdc6 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ regulator-name = "vdd-sys";
-+};
-+
-+®_dldo1 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-hdmi-dsi-sensor";
-+};
-+
-+®_dldo2 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-mipi";
-+};
-+
-+®_dldo3 {
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ regulator-name = "dovdd-csi";
-+};
-+
-+®_dldo4 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-wifi-io";
-+};
-+
-+®_drivevbus {
-+ regulator-name = "usb0-vbus";
-+ status = "okay";
-+};
-+
-+®_eldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-name = "cpvdd";
-+};
-+
-+®_eldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-name = "dvdd-csi";
-+};
-+
-+®_fldo1 {
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1200000>;
-+ regulator-name = "vcc-1v2-hsic";
-+};
-+
-+/*
-+ * The A64 chip cannot work without this regulator off, although
-+ * it seems to be only driving the AR100 core.
-+ * Maybe we don't still know well about CPUs domain.
-+ */
-+®_fldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ regulator-name = "vdd-cpus";
-+};
-+
-+®_rtc_ldo {
-+ regulator-name = "vcc-rtc";
-+};
-+
- &uart0 {
- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-+ pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
- };
-
-@@ -61,5 +214,6 @@
-
- &usbphy {
- usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+ usb0_vbus-supply = <®_drivevbus>;
- status = "okay";
- };
-diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-index 0716b14411..ef1c90401b 100644
---- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
-@@ -60,6 +60,17 @@
- stdout-path = "serial0:115200n8";
- };
-
-+ hdmi-connector {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+
- leds {
- compatible = "gpio-leds";
-
-@@ -86,6 +97,10 @@
- };
- };
-
-+&de {
-+ status = "okay";
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -103,6 +118,17 @@
- status = "okay";
- };
-
-+&hdmi {
-+ hvcc-supply = <®_dldo1>;
-+ status = "okay";
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
- &i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-@@ -151,7 +177,7 @@
-
- &mmc2 {
- pinctrl-names = "default";
-- pinctrl-0 = <&mmc2_pins>;
-+ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
- vmmc-supply = <®_dcdc1>;
- bus-width = <8>;
- non-removable;
-@@ -296,9 +322,13 @@
- regulator-name = "vcc-rtc";
- };
-
-+&simplefb_hdmi {
-+ vcc-hdmi-supply = <®_dldo1>;
-+};
-+
- &uart0 {
- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-+ pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
- };
-
-diff --git a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-index e2dce48fa2..31884dbc88 100644
---- a/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-+++ b/arch/arm/dts/sun50i-a64-nanopi-a64.dts
-@@ -51,12 +51,44 @@
- compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
-
- aliases {
-+ ethernet0 = &emac;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ hdmi-connector {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ blue {
-+ label = "nanopi-a64:blue:status";
-+ gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
-+ };
-+ };
-+
-+ wifi_pwrseq: wifi_pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ clocks = <&rtc 1>;
-+ clock-names = "ext_clock";
-+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+ };
-+};
-+
-+&de {
-+ status = "okay";
- };
-
- &ehci0 {
-@@ -67,6 +99,26 @@
- status = "okay";
- };
-
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rgmii_pins>;
-+ phy-mode = "rgmii";
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-supply = <®_dcdc1>;
-+ status = "okay";
-+};
-+
-+&hdmi {
-+ hvcc-supply = <®_dldo1>;
-+ status = "okay";
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
- /* i2c1 connected with gpio headers like pine64, bananapi */
- &i2c1 {
- pinctrl-names = "default";
-@@ -78,6 +130,13 @@
- bias-pull-up;
- };
-
-+&mdio {
-+ ext_rgmii_phy: address@hidden {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <7>;
-+ };
-+};
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
-@@ -88,6 +147,24 @@
- status = "okay";
- };
-
-+&mmc1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc1_pins>;
-+ vmmc-supply = <®_dcdc1>;
-+ vqmmc-supply = <®_dldo4>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ rtl8189etv: address@hidden {
-+ reg = <1>;
-+ interrupt-parent = <&r_pio>;
-+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
-+ interrupt-names = "host-wake";
-+ };
-+};
-+
- &ohci0 {
- status = "okay";
- };
-@@ -125,9 +202,9 @@
-
- ®_dcdc1 {
- regulator-always-on;
-- regulator-min-microvolt = <3000000>;
-- regulator-max-microvolt = <3000000>;
-- regulator-name = "vcc-3v";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-3v3";
- };
-
- ®_dcdc2 {
-@@ -195,9 +272,13 @@
- regulator-name = "vcc-rtc";
- };
-
-+&simplefb_hdmi {
-+ vcc-hdmi-supply = <®_dldo1>;
-+};
-+
- &uart0 {
- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-+ pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
- };
-
-diff --git a/arch/arm/dts/sun50i-a64-olinuxino.dts
b/arch/arm/dts/sun50i-a64-olinuxino.dts
-index 3b3081b10e..f7a4bccaa5 100644
---- a/arch/arm/dts/sun50i-a64-olinuxino.dts
-+++ b/arch/arm/dts/sun50i-a64-olinuxino.dts
-@@ -51,6 +51,7 @@
- compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
-
- aliases {
-+ ethernet0 = &emac;
- serial0 = &uart0;
- };
-
-@@ -58,12 +59,74 @@
- stdout-path = "serial0:115200n8";
- };
-
-+ hdmi-connector {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb1-vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-boot-on;
-+ enable-active-high;
-+ gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
-+ status = "okay";
-+ };
-+
- wifi_pwrseq: wifi_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
- };
- };
-
-+&de {
-+ status = "okay";
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rgmii_pins>;
-+ phy-mode = "rgmii";
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-supply = <®_dcdc1>;
-+ allwinner,tx-delay-ps = <600>;
-+ status = "okay";
-+};
-+
-+&hdmi {
-+ hvcc-supply = <®_dldo1>;
-+ status = "okay";
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
-+&mdio {
-+ ext_rgmii_phy: address@hidden {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
-+};
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
-@@ -92,6 +155,14 @@
- };
- };
-
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
- &r_rsb {
- status = "okay";
-
-@@ -100,6 +171,7 @@
- reg = <0x3a3>;
- interrupt-parent = <&r_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
- };
- };
-
-@@ -142,10 +214,14 @@
-
- /* DCDC3 is polyphased with DCDC2 */
-
-+/*
-+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
-+ * 1.35V that the PMIC can drive.
-+ */
- ®_dcdc5 {
- regulator-always-on;
-- regulator-min-microvolt = <1500000>;
-- regulator-max-microvolt = <1500000>;
-+ regulator-min-microvolt = <1360000>;
-+ regulator-max-microvolt = <1360000>;
- regulator-name = "vcc-ddr3";
- };
-
-@@ -180,6 +256,11 @@
- regulator-name = "vcc-wifi-io";
- };
-
-+®_drivevbus {
-+ regulator-name = "usb0-vbus";
-+ status = "okay";
-+};
-+
- ®_eldo1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-@@ -214,8 +295,24 @@
- regulator-name = "vcc-rtc";
- };
-
-+&simplefb_hdmi {
-+ vcc-hdmi-supply = <®_dldo1>;
-+};
-+
- &uart0 {
- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-+ pinctrl-0 = <&uart0_pb_pins>;
-+ status = "okay";
-+};
-+
-+&usb_otg {
-+ dr_mode = "otg";
-+ status = "okay";
-+};
-+
-+&usbphy {
- status = "okay";
-+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+ usb0_vbus-supply = <®_drivevbus>;
-+ usb1_vbus-supply = <®_usb1_vbus>;
- };
-diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts
b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-index bf42690a33..b0c64f7579 100644
---- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
-+++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
-@@ -1,5 +1,6 @@
- /*
- * Copyright (C) 2017 Jagan Teki <address@hidden>
-+ * Copyright (C) 2017-2018 Samuel Holland <address@hidden>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
-@@ -51,23 +52,127 @@
- compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
-
- aliases {
-+ ethernet0 = &emac;
- serial0 = &uart0;
-+ serial1 = &uart1;
-+ serial2 = &uart2;
-+ serial3 = &uart3;
-+ serial4 = &uart4;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ hdmi-connector {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "orangepi:green:status";
-+ gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-+ };
-+ };
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ enable-active-high;
-+ gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
-+ status = "okay";
-+ };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb1-vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-boot-on;
-+ enable-active-high;
-+ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
-+ status = "okay";
-+ };
-+
-+ wifi_pwrseq: wifi_pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
-+ };
-+};
-+
-+&de {
-+ status = "okay";
-+};
-+
-+&ehci0 {
-+ status = "okay";
- };
-
- &ehci1 {
- status = "okay";
- };
-
-+&emac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&rgmii_pins>;
-+ phy-mode = "rgmii";
-+ phy-handle = <&ext_rgmii_phy>;
-+ phy-supply = <®_gmac_3v3>;
-+ status = "okay";
-+};
-+
-+&hdmi {
-+ hvcc-supply = <®_dldo1>;
-+ status = "okay";
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
-+&mdio {
-+ ext_rgmii_phy: address@hidden {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
-+};
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <®_dcdc1>;
-- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-+ disable-wp;
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
-+&mmc1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc1_pins>;
-+ vmmc-supply = <®_dldo2>;
-+ vqmmc-supply = <®_dldo4>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+};
-+
-+&ohci0 {
- status = "okay";
- };
-
-@@ -89,9 +194,8 @@
- #include "axp803.dtsi"
-
- ®_aldo1 {
-- regulator-always-on;
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <3300000>;
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
- regulator-name = "afvcc-csi";
- };
-
-@@ -163,12 +267,23 @@
- regulator-name = "vcc-wifi-io";
- };
-
-+®_drivevbus {
-+ regulator-name = "usb0-vbus";
-+ status = "okay";
-+};
-+
- ®_eldo1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "cpvdd";
- };
-
-+®_eldo3 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-name = "dvdd-csi";
-+};
-+
- ®_fldo1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
-@@ -191,13 +306,65 @@
- regulator-name = "vcc-rtc";
- };
-
-+&simplefb_hdmi {
-+ vcc-hdmi-supply = <®_dldo1>;
-+};
-+
-+&spi0 {
-+ status = "okay";
-+
-+ address@hidden {
-+ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <80000000>;
-+ m25p,fast-read;
-+ status = "okay";
-+ };
-+};
-+
-+/* On debug connector */
- &uart0 {
- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-+ pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
- };
-
--&usbphy {
-+/* Bluetooth */
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-+ status = "okay";
-+};
-+
-+/* On Pi-2 connector, RTS/CTS optional */
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins>;
-+ status = "disabled";
-+};
-+
-+/* On Pi-2 connector, RTS/CTS optional */
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart3_pins>;
-+ status = "disabled";
-+};
-+
-+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
-+&uart4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart4_pins>;
-+ status = "disabled";
-+};
-+
-+&usb_otg {
-+ dr_mode = "otg";
- status = "okay";
- };
-
-+&usbphy {
-+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
-+ usb0_vbus-supply = <®_drivevbus>;
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ status = "okay";
-+};
-diff --git a/arch/arm/dts/sun50i-a64-pine64.dts
b/arch/arm/dts/sun50i-a64-pine64.dts
-index a75825798a..c077b6c1f4 100644
---- a/arch/arm/dts/sun50i-a64-pine64.dts
-+++ b/arch/arm/dts/sun50i-a64-pine64.dts
-@@ -62,6 +62,21 @@
- chosen {
- stdout-path = "serial0:115200n8";
- };
-+
-+ hdmi-connector {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+};
-+
-+&de {
-+ status = "okay";
- };
-
- &ehci0 {
-@@ -82,6 +97,17 @@
-
- };
-
-+&hdmi {
-+ hvcc-supply = <®_dldo1>;
-+ status = "okay";
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
- &i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-@@ -229,6 +255,10 @@
- regulator-name = "vcc-rtc";
- };
-
-+&simplefb_hdmi {
-+ vcc-hdmi-supply = <®_dldo1>;
-+};
-+
- /* On Euler connector */
- &spdif {
- status = "disabled";
-@@ -237,7 +267,7 @@
- /* On Exp and Euler connectors */
- &uart0 {
- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-+ pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
- };
-
-diff --git a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-index abe179de35..53fcc9098d 100644
---- a/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm/dts/sun50i-a64-sopine-baseboard.dts
-@@ -61,6 +61,17 @@
- stdout-path = "serial0:115200n8";
- };
-
-+ hdmi-connector {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+
- reg_vcc1v8: vcc1v8 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8";
-@@ -69,6 +80,10 @@
- };
- };
-
-+&de {
-+ status = "okay";
-+};
-+
- &ehci0 {
- status = "okay";
- };
-@@ -86,6 +101,17 @@
- status = "okay";
- };
-
-+&hdmi {
-+ hvcc-supply = <®_dldo1>;
-+ status = "okay";
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
- &mdio {
- ext_rgmii_phy: address@hidden {
- compatible = "ethernet-phy-ieee802.3-c22";
-@@ -134,9 +160,13 @@
- regulator-name = "vcc-wifi";
- };
-
-+&simplefb_hdmi {
-+ vcc-hdmi-supply = <®_dldo1>;
-+};
-+
- &uart0 {
- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_pins_a>;
-+ pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
- };
-
-diff --git a/arch/arm/dts/sun50i-a64-sopine.dtsi
b/arch/arm/dts/sun50i-a64-sopine.dtsi
-index 43418bd881..6723b8695e 100644
---- a/arch/arm/dts/sun50i-a64-sopine.dtsi
-+++ b/arch/arm/dts/sun50i-a64-sopine.dtsi
-@@ -45,6 +45,8 @@
-
- #include "sun50i-a64.dtsi"
-
-+#include <dt-bindings/gpio/gpio.h>
-+
- &mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
-@@ -52,6 +54,7 @@
- non-removable;
- disable-wp;
- bus-width = <4>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- status = "okay";
- };
-
-@@ -66,6 +69,18 @@
- };
- };
-
-+&spi0 {
-+ status = "okay";
-+
-+ address@hidden {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <40000000>;
-+ };
-+};
-+
- #include "axp803.dtsi"
-
- ®_aldo2 {
-diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
-index 7a083637c4..f3a66f8882 100644
---- a/arch/arm/dts/sun50i-a64.dtsi
-+++ b/arch/arm/dts/sun50i-a64.dtsi
-@@ -43,9 +43,12 @@
- */
-
- #include <dt-bindings/clock/sun50i-a64-ccu.h>
-+#include <dt-bindings/clock/sun8i-de2.h>
- #include <dt-bindings/clock/sun8i-r-ccu.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/reset/sun50i-a64-ccu.h>
-+#include <dt-bindings/reset/sun8i-de2.h>
-+#include <dt-bindings/reset/sun8i-r-ccu.h>
-
- / {
- interrupt-parent = <&gic>;
-@@ -57,17 +60,21 @@
- #size-cells = <1>;
- ranges;
-
--/*
-- * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
-- * However there is no support for this clock on A64 yet, so we depend
-- * on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
-- */
- simplefb_lcd: framebuffer-lcd {
- compatible = "allwinner,simple-framebuffer",
- "simple-framebuffer";
- allwinner,pipeline = "mixer0-lcd0";
- clocks = <&ccu CLK_TCON0>,
-- <&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
-+ <&display_clocks CLK_MIXER0>;
-+ status = "disabled";
-+ };
-+
-+ simplefb_hdmi: framebuffer-hdmi {
-+ compatible = "allwinner,simple-framebuffer",
-+ "simple-framebuffer";
-+ allwinner,pipeline = "mixer1-lcd1-hdmi";
-+ clocks = <&display_clocks CLK_MIXER1>,
-+ <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
- status = "disabled";
- };
- };
-@@ -81,6 +88,7 @@
- device_type = "cpu";
- reg = <0>;
- enable-method = "psci";
-+ next-level-cache = <&L2>;
- };
-
- cpu1: address@hidden {
-@@ -88,6 +96,7 @@
- device_type = "cpu";
- reg = <1>;
- enable-method = "psci";
-+ next-level-cache = <&L2>;
- };
-
- cpu2: address@hidden {
-@@ -95,6 +104,7 @@
- device_type = "cpu";
- reg = <2>;
- enable-method = "psci";
-+ next-level-cache = <&L2>;
- };
-
- cpu3: address@hidden {
-@@ -102,7 +112,20 @@
- device_type = "cpu";
- reg = <3>;
- enable-method = "psci";
-+ next-level-cache = <&L2>;
- };
-+
-+ L2: l2-cache {
-+ compatible = "cache";
-+ cache-level = <2>;
-+ };
-+ };
-+
-+ de: display-engine {
-+ compatible = "allwinner,sun50i-a64-display-engine";
-+ allwinner,pipelines = <&mixer0>,
-+ <&mixer1>;
-+ status = "disabled";
- };
-
- osc24M: osc24M_clk {
-@@ -168,10 +191,92 @@
- #size-cells = <1>;
- ranges;
-
-+ address@hidden {
-+ compatible = "allwinner,sun50i-a64-de2";
-+ reg = <0x1000000 0x400000>;
-+ allwinner,sram = <&de2_sram 1>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0 0x1000000 0x400000>;
-+
-+ display_clocks: address@hidden {
-+ compatible = "allwinner,sun50i-a64-de2-clk";
-+ reg = <0x0 0x100000>;
-+ clocks = <&ccu CLK_DE>,
-+ <&ccu CLK_BUS_DE>;
-+ clock-names = "mod",
-+ "bus";
-+ resets = <&ccu RST_BUS_DE>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+
-+ mixer0: address@hidden {
-+ compatible = "allwinner,sun50i-a64-de2-mixer-0";
-+ reg = <0x100000 0x100000>;
-+ clocks = <&display_clocks CLK_BUS_MIXER0>,
-+ <&display_clocks CLK_MIXER0>;
-+ clock-names = "bus",
-+ "mod";
-+ resets = <&display_clocks RST_MIXER0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ mixer0_out: address@hidden {
-+ reg = <1>;
-+
-+ mixer0_out_tcon0: endpoint {
-+ remote-endpoint =
<&tcon0_in_mixer0>;
-+ };
-+ };
-+ };
-+ };
-+
-+ mixer1: address@hidden {
-+ compatible = "allwinner,sun50i-a64-de2-mixer-1";
-+ reg = <0x200000 0x100000>;
-+ clocks = <&display_clocks CLK_BUS_MIXER1>,
-+ <&display_clocks CLK_MIXER1>;
-+ clock-names = "bus",
-+ "mod";
-+ resets = <&display_clocks RST_MIXER1>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ mixer1_out: address@hidden {
-+ reg = <1>;
-+
-+ mixer1_out_tcon1: endpoint {
-+ remote-endpoint =
<&tcon1_in_mixer1>;
-+ };
-+ };
-+ };
-+ };
-+ };
-+
- syscon: address@hidden {
-- compatible = "allwinner,sun50i-a64-system-controller",
-- "syscon";
-+ compatible = "allwinner,sun50i-a64-system-control";
- reg = <0x01c00000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ sram_c: address@hidden {
-+ compatible = "mmio-sram";
-+ reg = <0x00018000 0x28000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0 0x00018000 0x28000>;
-+
-+ de2_sram: address@hidden {
-+ compatible =
"allwinner,sun50i-a64-sram-c";
-+ reg = <0x0000 0x28000>;
-+ };
-+ };
- };
-
- dma: address@hidden {
-@@ -185,6 +290,75 @@
- #dma-cells = <1>;
- };
-
-+ tcon0: address@hidden {
-+ compatible = "allwinner,sun50i-a64-tcon-lcd",
-+ "allwinner,sun8i-a83t-tcon-lcd";
-+ reg = <0x01c0c000 0x1000>;
-+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
-+ clock-names = "ahb", "tcon-ch0";
-+ clock-output-names = "tcon-pixel-clock";
-+ resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
-+ reset-names = "lcd", "lvds";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon0_in: address@hidden {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+
-+ tcon0_in_mixer0: address@hidden {
-+ reg = <0>;
-+ remote-endpoint =
<&mixer0_out_tcon0>;
-+ };
-+ };
-+
-+ tcon0_out: address@hidden {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <1>;
-+ };
-+ };
-+ };
-+
-+ tcon1: address@hidden {
-+ compatible = "allwinner,sun50i-a64-tcon-tv",
-+ "allwinner,sun8i-a83t-tcon-tv";
-+ reg = <0x01c0d000 0x1000>;
-+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
-+ clock-names = "ahb", "tcon-ch1";
-+ resets = <&ccu RST_BUS_TCON1>;
-+ reset-names = "lcd";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ tcon1_in: address@hidden {
-+ reg = <0>;
-+
-+ tcon1_in_mixer1: endpoint {
-+ remote-endpoint =
<&mixer1_out_tcon1>;
-+ };
-+ };
-+
-+ tcon1_out: address@hidden {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <1>;
-+
-+ tcon1_out_hdmi: address@hidden {
-+ reg = <1>;
-+ remote-endpoint =
<&hdmi_in_tcon1>;
-+ };
-+ };
-+ };
-+ };
-+
- mmc0: address@hidden {
- compatible = "allwinner,sun50i-a64-mmc";
- reg = <0x01c0f000 0x1000>;
-@@ -227,6 +401,11 @@
- #size-cells = <0>;
- };
-
-+ sid: address@hidden {
-+ compatible = "allwinner,sun50i-a64-sid";
-+ reg = <0x1c14000 0x400>;
-+ };
-+
- usb_otg: address@hidden {
- compatible = "allwinner,sun8i-a33-musb";
- reg = <0x01c19000 0x0400>;
-@@ -356,7 +535,7 @@
- };
-
- mmc2_pins: mmc2-pins {
-- pins = "PC1", "PC5", "PC6", "PC8", "PC9",
-+ pins = "PC5", "PC6", "PC8", "PC9",
- "PC10","PC11", "PC12", "PC13",
- "PC14", "PC15", "PC16";
- function = "mmc2";
-@@ -364,6 +543,18 @@
- bias-pull-up;
- };
-
-+ mmc2_ds_pin: mmc2-ds-pin {
-+ pins = "PC1";
-+ function = "mmc2";
-+ drive-strength = <30>;
-+ bias-pull-up;
-+ };
-+
-+ pwm_pin: pwm_pin {
-+ pins = "PD22";
-+ function = "pwm";
-+ };
-+
- rmii_pins: rmii_pins {
- pins = "PD10", "PD11", "PD13", "PD14", "PD17",
- "PD18", "PD19", "PD20", "PD22", "PD23";
-@@ -394,7 +585,7 @@
- function = "spi1";
- };
-
-- uart0_pins_a: uart0 {
-+ uart0_pb_pins: uart0-pb-pins {
- pins = "PB8", "PB9";
- function = "uart0";
- };
-@@ -474,15 +665,6 @@
- status = "disabled";
- };
-
-- pwm: address@hidden {
-- compatible = "allwinner,sun50i-a64-pwm",
-- "allwinner,sun5i-a13-pwm";
-- reg = <0x01c21400 0x8>;
-- clocks = <&osc24M>;
-- #pwm-cells = <3>;
-- status = "disabled";
-- };
--
- uart0: address@hidden {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
-@@ -617,8 +799,6 @@
- clocks = <&ccu CLK_BUS_EMAC>;
- clock-names = "stmmaceth";
- status = "disabled";
-- #address-cells = <1>;
-- #size-cells = <0>;
-
- mdio: mdio {
- compatible = "snps,dwmac-mdio";
-@@ -638,11 +818,69 @@
- #interrupt-cells = <3>;
- };
-
-+ pwm: address@hidden {
-+ compatible = "allwinner,sun50i-a64-pwm",
-+ "allwinner,sun5i-a13-pwm";
-+ reg = <0x01c21400 0x400>;
-+ clocks = <&osc24M>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm_pin>;
-+ #pwm-cells = <3>;
-+ status = "disabled";
-+ };
-+
-+ hdmi: address@hidden {
-+ compatible = "allwinner,sun50i-a64-dw-hdmi",
-+ "allwinner,sun8i-a83t-dw-hdmi";
-+ reg = <0x01ee0000 0x10000>;
-+ reg-io-width = <1>;
-+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-+ <&ccu CLK_HDMI>;
-+ clock-names = "iahb", "isfr", "tmds";
-+ resets = <&ccu RST_BUS_HDMI1>;
-+ reset-names = "ctrl";
-+ phys = <&hdmi_phy>;
-+ phy-names = "hdmi-phy";
-+ status = "disabled";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hdmi_in: address@hidden {
-+ reg = <0>;
-+
-+ hdmi_in_tcon1: endpoint {
-+ remote-endpoint =
<&tcon1_out_hdmi>;
-+ };
-+ };
-+
-+ hdmi_out: address@hidden {
-+ reg = <1>;
-+ };
-+ };
-+ };
-+
-+ hdmi_phy: address@hidden {
-+ compatible = "allwinner,sun50i-a64-hdmi-phy";
-+ reg = <0x01ef0000 0x10000>;
-+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-+ <&ccu 7>;
-+ clock-names = "bus", "mod", "pll-0";
-+ resets = <&ccu RST_BUS_HDMI0>;
-+ reset-names = "phy";
-+ #phy-cells = <0>;
-+ };
-+
- rtc: address@hidden {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x54>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
-+ clocks = <&osc32k>;
-+ #clock-cells = <1>;
- };
-
- r_intc: address@hidden {
-@@ -664,6 +902,29 @@
- #reset-cells = <1>;
- };
-
-+ r_i2c: address@hidden {
-+ compatible = "allwinner,sun50i-a64-i2c",
-+ "allwinner,sun6i-a31-i2c";
-+ reg = <0x01f02400 0x400>;
-+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&r_ccu CLK_APB0_I2C>;
-+ resets = <&r_ccu RST_APB0_I2C>;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ r_pwm: address@hidden {
-+ compatible = "allwinner,sun50i-a64-pwm",
-+ "allwinner,sun5i-a13-pwm";
-+ reg = <0x01f03800 0x400>;
-+ clocks = <&osc24M>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&r_pwm_pin>;
-+ #pwm-cells = <3>;
-+ status = "disabled";
-+ };
-+
- r_pio: address@hidden {
- compatible = "allwinner,sun50i-a64-r-pinctrl";
- reg = <0x01f02c00 0x400>;
-@@ -675,6 +936,16 @@
- interrupt-controller;
- #interrupt-cells = <3>;
-
-+ r_i2c_pl89_pins: r-i2c-pl89-pins {
-+ pins = "PL8", "PL9";
-+ function = "s_i2c";
-+ };
-+
-+ r_pwm_pin: pwm {
-+ pins = "PL10";
-+ function = "s_pwm";
-+ };
-+
- r_rsb_pins: rsb {
- pins = "PL0", "PL1";
- function = "s_rsb";
---
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-dts.patch
b/gnu/packages/patches/u-boot-pinebook-dts.patch
deleted file mode 100644
index 48c004f..0000000
--- a/gnu/packages/patches/u-boot-pinebook-dts.patch
+++ /dev/null
@@ -1,388 +0,0 @@
-From b972831c3cd24f3c9bb0995ed61db8f8239f3391 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <address@hidden>
-Date: Mon, 5 Nov 2018 20:24:31 -0800
-Subject: [PATCH 10/13] sunxi: DT: add support for Pinebook
-
-Pinebook is a laptop produced by Pine64, with USB-connected keyboard,
-USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP
-bridge from Analogix.
-
-Signed-off-by: Vasily Khoruzhick <address@hidden>
-Acked-by: Maxime Ripard <address@hidden>
-Tested-by: Maxime Ripard <address@hidden>
-Cc: Vagrant Cascadian <address@hidden>
-Reviewed-by: Jagan Teki <address@hidden>
----
- arch/arm/dts/Makefile | 1 +
- arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi | 15 ++
- arch/arm/dts/sun50i-a64-pinebook.dts | 294 +++++++++++++++++++++++++++
- configs/pinebook_defconfig | 22 ++
- 4 files changed, 332 insertions(+)
- create mode 100644 arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
- create mode 100644 arch/arm/dts/sun50i-a64-pinebook.dts
- create mode 100644 configs/pinebook_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 3093c1185e..eae6b9ee5d 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -406,6 +406,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \
- sun50i-a64-orangepi-win.dtb \
- sun50i-a64-pine64-plus.dtb \
- sun50i-a64-pine64.dtb \
-+ sun50i-a64-pinebook.dtb \
- sun50i-a64-sopine-baseboard.dtb
- dtb-$(CONFIG_MACH_SUN9I) += \
- sun9i-a80-optimus.dtb \
-diff --git a/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
-new file mode 100644
-index 0000000000..a99b7171d0
---- /dev/null
-+++ b/arch/arm/dts/sun50i-a64-pinebook-u-boot.dtsi
-@@ -0,0 +1,15 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2018 Vasily Khoruzhick <address@hidden>
-+ *
-+ */
-+
-+/* The ANX6345 eDP-bridge is on r_i2c */
-+&r_i2c {
-+ anx6345: address@hidden {
-+ compatible = "analogix,anx6345";
-+ reg = <0x38>;
-+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
-+ status = "okay";
-+ };
-+};
-diff --git a/arch/arm/dts/sun50i-a64-pinebook.dts
b/arch/arm/dts/sun50i-a64-pinebook.dts
-new file mode 100644
-index 0000000000..ec537c5297
---- /dev/null
-+++ b/arch/arm/dts/sun50i-a64-pinebook.dts
-@@ -0,0 +1,294 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2017 Icenowy Zheng <address@hidden>
-+ * Copyright (C) 2018 Vasily Khoruzhick <address@hidden>
-+ *
-+ */
-+
-+/dts-v1/;
-+
-+#include "sun50i-a64.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/pwm/pwm.h>
-+
-+/ {
-+ model = "Pinebook";
-+ compatible = "pine64,pinebook", "allwinner,sun50i-a64";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ ethernet0 = &rtl8723cs;
-+ };
-+
-+ vdd_bl: address@hidden {
-+ compatible = "regulator-fixed";
-+ regulator-name = "bl-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
-+ enable-active-high;
-+ };
-+
-+ backlight: backlight {
-+ compatible = "pwm-backlight";
-+ pwms = <&pwm 0 50000 0>;
-+ brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
-+ default-brightness-level = <2>;
-+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
-+ power-supply = <&vdd_bl>;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+
-+ framebuffer-lcd {
-+ panel-supply = <®_dc1sw>;
-+ dvdd25-supply = <®_dldo2>;
-+ dvdd12-supply = <®_fldo1>;
-+ };
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+
-+ lid_switch {
-+ label = "Lid Switch";
-+ gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
-+ linux,input-type = <EV_SW>;
-+ linux,code = <SW_LID>;
-+ linux,can-disable;
-+ wakeup-source;
-+ };
-+ };
-+
-+ reg_vcc3v3: vcc3v3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ wifi_pwrseq: wifi_pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
-+ };
-+};
-+
-+&ehci0 {
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins>;
-+ vmmc-supply = <®_dcdc1>;
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
-+ disable-wp;
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
-+&mmc1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc1_pins>;
-+ vmmc-supply = <®_dldo4>;
-+ vqmmc-supply = <®_eldo1>;
-+ mmc-pwrseq = <&wifi_pwrseq>;
-+ bus-width = <4>;
-+ non-removable;
-+ status = "okay";
-+
-+ rtl8723cs: address@hidden {
-+ reg = <1>;
-+ };
-+};
-+
-+&mmc2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
-+ vmmc-supply = <®_dcdc1>;
-+ vqmmc-supply = <®_eldo1>;
-+ bus-width = <8>;
-+ non-removable;
-+ cap-mmc-hw-reset;
-+ mmc-hs200-1_8v;
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&pwm {
-+ status = "okay";
-+};
-+
-+&r_rsb {
-+ status = "okay";
-+
-+ axp803: address@hidden {
-+ compatible = "x-powers,axp803";
-+ reg = <0x3a3>;
-+ interrupt-parent = <&r_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+ };
-+};
-+
-+/* The ANX6345 eDP-bridge is on r_i2c */
-+&r_i2c {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&r_i2c_pl89_pins>;
-+ status = "okay";
-+};
-+
-+#include "axp803.dtsi"
-+
-+®_aldo1 {
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ regulator-name = "vcc-csi";
-+};
-+
-+®_aldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-pl";
-+};
-+
-+®_aldo3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <2700000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-pll-avcc";
-+};
-+
-+®_dc1sw {
-+ regulator-name = "vcc-lcd";
-+};
-+
-+®_dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-3v3";
-+};
-+
-+®_dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1300000>;
-+ regulator-name = "vdd-cpux";
-+};
-+
-+/* DCDC3 is polyphased with DCDC2 */
-+
-+®_dcdc5 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1200000>;
-+ regulator-name = "vcc-dram";
-+};
-+
-+®_dcdc6 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ regulator-name = "vdd-sys";
-+};
-+
-+®_dldo1 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-hdmi";
-+};
-+
-+®_dldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-name = "vcc-edp";
-+};
-+
-+®_dldo3 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "avdd-csi";
-+};
-+
-+®_dldo4 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-wifi";
-+};
-+
-+®_eldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-name = "cpvdd";
-+};
-+
-+®_eldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-name = "vdd-1v8-csi";
-+};
-+
-+®_fldo1 {
-+ regulator-min-microvolt = <1200000>;
-+ regulator-max-microvolt = <1200000>;
-+ regulator-name = "vcc-1v2-hsic";
-+};
-+
-+®_fldo2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ regulator-name = "vdd-cpus";
-+};
-+
-+®_ldo_io0 {
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc-usb";
-+ status = "okay";
-+};
-+
-+®_rtc_ldo {
-+ regulator-name = "vcc-rtc";
-+};
-+
-+&simplefb_hdmi {
-+ vcc-hdmi-supply = <®_dldo1>;
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pb_pins>;
-+ status = "okay";
-+};
-+
-+&usb_otg {
-+ dr_mode = "host";
-+};
-+
-+&usbphy {
-+ usb0_vbus-supply = <®_ldo_io0>;
-+ usb1_vbus-supply = <®_ldo_io0>;
-+ status = "okay";
-+};
-diff --git a/configs/pinebook_defconfig b/configs/pinebook_defconfig
-new file mode 100644
-index 0000000000..5294dbd2eb
---- /dev/null
-+++ b/configs/pinebook_defconfig
-@@ -0,0 +1,22 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN50I=y
-+CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
-+CONFIG_DRAM_CLK=552
-+CONFIG_DRAM_ZQ=3881949
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_R_I2C_ENABLE=y
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinebook"
-+CONFIG_DM_REGULATOR=y
-+CONFIG_DM_REGULATOR_FIXED=y
-+CONFIG_DM_PWM=y
-+CONFIG_PWM_SUNXI=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-+# CONFIG_USB_GADGET is not set
-+CONFIG_VIDEO_BRIDGE=y
-+CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y
---
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
b/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
deleted file mode 100644
index 118bdf8..0000000
--- a/gnu/packages/patches/u-boot-pinebook-mmc-calibration.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 20940ef2a397446a209350900d3bd618c3fd5b94 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <address@hidden>
-Date: Mon, 5 Nov 2018 20:24:28 -0800
-Subject: [PATCH 07/13] mmc: sunxi: add support for automatic delay calibration
-
-A64 and H6 support automatic delay calibration and Linux driver uses it
-instead of hardcoded delays. Add support for it to u-boot driver.
-
-Fixes eMMC instability on Pinebook
-
-Signed-off-by: Vasily Khoruzhick <address@hidden>
-Acked-by: Maxime Ripard <address@hidden>
-Tested-by: Maxime Ripard <address@hidden>
-Reviewed-by: Andre Przywara <address@hidden>
-Cc: Vagrant Cascadian <address@hidden>
-Reviewed-by: Jagan Teki <address@hidden>
----
- arch/arm/include/asm/arch-sunxi/mmc.h | 6 +++++-
- drivers/mmc/sunxi_mmc.c | 21 ++++++++++++++++++++-
- 2 files changed, 25 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h
b/arch/arm/include/asm/arch-sunxi/mmc.h
-index d98c53faaa..f2deafddd2 100644
---- a/arch/arm/include/asm/arch-sunxi/mmc.h
-+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
-@@ -46,7 +46,9 @@ struct sunxi_mmc {
- u32 cbda; /* 0x94 */
- u32 res2[26];
- #if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_MACH_SUN50I_H6)
-- u32 res3[64];
-+ u32 res3[17];
-+ u32 samp_dl;
-+ u32 res4[46];
- #endif
- u32 fifo; /* 0x100 / 0x200 FIFO access address */
- };
-@@ -130,5 +132,7 @@ struct sunxi_mmc {
- #define SUNXI_MMC_COMMON_CLK_GATE (1 << 16)
- #define SUNXI_MMC_COMMON_RESET (1 << 18)
-
-+#define SUNXI_MMC_CAL_DL_SW_EN (0x1 << 7)
-+
- struct mmc *sunxi_mmc_init(int sdc_no);
- #endif /* _SUNXI_MMC_H */
-diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
-index 39f15eb423..147eb9b4d5 100644
---- a/drivers/mmc/sunxi_mmc.c
-+++ b/drivers/mmc/sunxi_mmc.c
-@@ -99,11 +99,16 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv,
unsigned int hz)
- {
- unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
- bool new_mode = false;
-+ bool calibrate = false;
- u32 val = 0;
-
- if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2))
- new_mode = true;
-
-+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
-+ calibrate = true;
-+#endif
-+
- /*
- * The MMC clock has an extra /2 post-divider when operating in the new
- * mode.
-@@ -174,7 +179,11 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv,
unsigned int hz)
- val = CCM_MMC_CTRL_MODE_SEL_NEW;
- setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
- #endif
-- } else {
-+ } else if (!calibrate) {
-+ /*
-+ * Use hardcoded delay values if controller doesn't support
-+ * calibration
-+ */
- val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
- CCM_MMC_CTRL_SCLK_DLY(sclk_dly);
- }
-@@ -228,6 +237,16 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv,
struct mmc *mmc)
- rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
- writel(rval, &priv->reg->clkcr);
-
-+#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN50I_H6)
-+ /* A64 supports calibration of delays on MMC controller and we
-+ * have to set delay of zero before starting calibration.
-+ * Allwinner BSP driver sets a delay only in the case of
-+ * using HS400 which is not supported by mainline U-Boot or
-+ * Linux at the moment
-+ */
-+ writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl);
-+#endif
-+
- /* Re-enable Clock */
- rval |= SUNXI_MMC_CLK_ENABLE;
- writel(rval, &priv->reg->clkcr);
---
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
b/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
deleted file mode 100644
index 824a16b..0000000
--- a/gnu/packages/patches/u-boot-pinebook-r_i2c-controller.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 31a4ac4d79d75baeede3edfa95515fd4169ef502 Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <address@hidden>
-Date: Mon, 5 Nov 2018 20:24:30 -0800
-Subject: [PATCH 09/13] sun50i: A64: add support for R_I2C controller
-
-Allwinner A64 has a I2C controller, which is in the R_ MMIO zone and has
-two groups of pinmuxes on PL bank, so it's called R_I2C.
-
-Add support for this I2C controller and the pinmux which doesn't conflict
-with RSB.
-
-Signed-off-by: Vasily Khoruzhick <address@hidden>
-Acked-by: Maxime Ripard <address@hidden>
-Tested-by: Maxime Ripard <address@hidden>
-Cc: Vagrant Cascadian <address@hidden>
-Acked-by: Jagan Teki <address@hidden>
----
- arch/arm/include/asm/arch-sunxi/gpio.h | 1 +
- arch/arm/mach-sunxi/Kconfig | 1 +
- board/sunxi/board.c | 6 ++++++
- 3 files changed, 8 insertions(+)
-
-diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h
b/arch/arm/include/asm/arch-sunxi/gpio.h
-index 6a5eafc3d3..2daf23f6f5 100644
---- a/arch/arm/include/asm/arch-sunxi/gpio.h
-+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
-@@ -211,6 +211,7 @@ enum sunxi_gpio_number {
- #define SUN8I_H3_GPL_R_TWI 2
- #define SUN8I_A23_GPL_R_TWI 3
- #define SUN8I_GPL_R_UART 2
-+#define SUN50I_GPL_R_TWI 2
-
- #define SUN9I_GPN_R_RSB 3
-
-diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
-index 6277abc3cc..560dc9b25d 100644
---- a/arch/arm/mach-sunxi/Kconfig
-+++ b/arch/arm/mach-sunxi/Kconfig
-@@ -278,6 +278,7 @@ config MACH_SUN50I
- select ARM64
- select DM_I2C
- select PHY_SUN4I_USB
-+ select SUN6I_PRCM
- select SUNXI_DE2
- select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
-diff --git a/board/sunxi/board.c b/board/sunxi/board.c
-index b196d48674..64ccbc7245 100644
---- a/board/sunxi/board.c
-+++ b/board/sunxi/board.c
-@@ -168,10 +168,16 @@ void i2c_init_board(void)
- #endif
-
- #ifdef CONFIG_R_I2C_ENABLE
-+#ifdef CONFIG_MACH_SUN50I
-+ clock_twi_onoff(5, 1);
-+ sunxi_gpio_set_cfgpin(SUNXI_GPL(8), SUN50I_GPL_R_TWI);
-+ sunxi_gpio_set_cfgpin(SUNXI_GPL(9), SUN50I_GPL_R_TWI);
-+#else
- clock_twi_onoff(5, 1);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_H3_GPL_R_TWI);
- sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_H3_GPL_R_TWI);
- #endif
-+#endif
- }
-
- #if defined(CONFIG_ENV_IS_IN_MMC) && defined(CONFIG_ENV_IS_IN_FAT)
---
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-syscon-node.patch
b/gnu/packages/patches/u-boot-pinebook-syscon-node.patch
deleted file mode 100644
index 9289645..0000000
--- a/gnu/packages/patches/u-boot-pinebook-syscon-node.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From ababb5920e8992c9bb7956df3cc85dc68d27dfe8 Mon Sep 17 00:00:00 2001
-From: Andre Przywara <address@hidden>
-Date: Mon, 29 Oct 2018 00:56:48 +0000
-Subject: [PATCH 04/13] sunxi: A64: Re-add syscon to DT node
-
-The sun50i-a64.dtsi changes introduced in Linux v4.19-rc1 changed the
-compatible name for the syscon controller, dropping the generic "syscon"
-fallback. Using this new DT node will make the Ethernet driver in every
-older kernel (or non-Linux kernels) fail to initialise the MAC device.
-
-To allow booting distribution kernels (from installer images via UEFI,
-for instance), re-add the syscon compatible string as a fallback. This
-works with both older and newer kernels.
-
-Signed-off-by: Andre Przywara <address@hidden>
-Acked-by: Maxime Ripard <address@hidden>
-Reviewed-by: Jagan Teki <address@hidden>
----
- arch/arm/dts/sun50i-a64.dtsi | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
-index f3a66f8882..ff41abc96a 100644
---- a/arch/arm/dts/sun50i-a64.dtsi
-+++ b/arch/arm/dts/sun50i-a64.dtsi
-@@ -259,7 +259,8 @@
- };
-
- syscon: address@hidden {
-- compatible = "allwinner,sun50i-a64-system-control";
-+ compatible = "allwinner,sun50i-a64-system-control",
-+ "syscon";
- reg = <0x01c00000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
---
-2.11.0
-
diff --git a/gnu/packages/patches/u-boot-pinebook-video-bridge.patch
b/gnu/packages/patches/u-boot-pinebook-video-bridge.patch
deleted file mode 100644
index 8c6ca8a..0000000
--- a/gnu/packages/patches/u-boot-pinebook-video-bridge.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 8336a43792a103c13d939b3925cb75322911f7fb Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <address@hidden>
-Date: Mon, 5 Nov 2018 20:24:29 -0800
-Subject: [PATCH 08/13] dm: video: bridge: don't fail to activate bridge if
- reset or sleep GPIO is missing
-
-Both GPIOs are optional, so we shouldn't fail if any is missing.
-Without this fix reset is not deasserted if sleep GPIO is missing.
-
-Signed-off-by: Vasily Khoruzhick <address@hidden>
-Acked-by: Maxime Ripard <address@hidden>
-Tested-by: Maxime Ripard <address@hidden>
-Reviewed-by: Andre Przywara <address@hidden>
-Cc: Vagrant Cascadian <address@hidden>
----
- drivers/video/bridge/video-bridge-uclass.c | 16 +++++++++++-----
- 1 file changed, 11 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/video/bridge/video-bridge-uclass.c
b/drivers/video/bridge/video-bridge-uclass.c
-index cd4959cc71..5fecb4cfd5 100644
---- a/drivers/video/bridge/video-bridge-uclass.c
-+++ b/drivers/video/bridge/video-bridge-uclass.c
-@@ -106,13 +106,19 @@ static int video_bridge_pre_probe(struct udevice *dev)
- int video_bridge_set_active(struct udevice *dev, bool active)
- {
- struct video_bridge_priv *uc_priv = dev_get_uclass_priv(dev);
-- int ret;
-+ int ret = 0;
-
- debug("%s: %d\n", __func__, active);
-- ret = dm_gpio_set_value(&uc_priv->sleep, !active);
-- if (ret)
-- return ret;
-- if (active) {
-+ if (uc_priv->sleep.dev) {
-+ ret = dm_gpio_set_value(&uc_priv->sleep, !active);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ if (!active)
-+ return 0;
-+
-+ if (uc_priv->reset.dev) {
- ret = dm_gpio_set_value(&uc_priv->reset, true);
- if (ret)
- return ret;
---
-2.11.0
-