[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: “Guix Profiles in Practice”
From: |
Konrad Hinsen |
Subject: |
Re: “Guix Profiles in Practice” |
Date: |
Mon, 28 Oct 2019 17:20:51 +0100 |
Hi Pierre,
>> Jumping to symbol definitions, for example, or access to documentation.
>
> I can jump to definition with no problem. Is your load path set
> properly?
After inspection... no. At least not in all my Guix installations.
It does work fine with the right path.
> Access to the manual has been broken forever apparently.
>
> Work-around here: https://gitlab.com/jaor/geiser/issues/252
Great, thanks! The biggest improvement in my Guix experience for a
while!
Cheers,
Konrad.
- “Guix Profiles in Practice”, Ludovic Courtès, 2019/10/25
- Re: “Guix Profiles in Practice”, Thompson, David, 2019/10/25
- Re: “Guix Profiles in Practice”, Pjotr Prins, 2019/10/25
- Re: “Guix Profiles in Practice”, Pierre Neidhardt, 2019/10/26
- Re: “Guix Profiles in Practice”, Pjotr Prins, 2019/10/27
- Re: “Guix Profiles in Practice”, Pierre Neidhardt, 2019/10/27
- Re: “Guix Profiles in Practice”, Hartmut Goebel, 2019/10/27
- Re: “Guix Profiles in Practice”, Konrad Hinsen, 2019/10/27
- Re: “Guix Profiles in Practice”, Pierre Neidhardt, 2019/10/27
- Re: “Guix Profiles in Practice”,
Konrad Hinsen <=
- Re: “Guix Profiles in Practice”, Pierre Neidhardt, 2019/10/30
Re: “Guix Profiles in Practice”, Jonathan Frederickson, 2019/10/25
Re: “Guix Profiles in Practice”, Pierre Neidhardt, 2019/10/26
Re: “Guix Profiles in Practice”, Konrad Hinsen, 2019/10/27
Re: “Guix Profiles in Practice”, Jelle Licht, 2019/10/27
Re: “Guix Profiles in Practice”, Alex Griffin, 2019/10/26