[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Honeycomb LX2 ARM board, problems booting Guix

From: Christopher Baines
Subject: Re: Honeycomb LX2 ARM board, problems booting Guix
Date: Thu, 01 Jul 2021 01:22:04 +0100
User-agent: mu4e 1.4.15; emacs 27.2

Vagrant Cascadian <> writes:

> On 2021-06-29, Christopher Baines wrote:
>> I've had a Honeycomb LX2 board for a few weeks now, but I've been
>> struggling to get Guix installed on it.
>> The most success I've had is with an installer image written to either a
>> USB drive or nVME drive. I changed the bootloader to the
>> grub-efi-bootloader, using the efi-raw image type, a couple of other
>> tweaks, but I only get as far as Linux starting Guile and then it
>> promptly erroring [1].
>> 1:
>> For some reason, /proc/partitions is empty, and I can't see usual things
>> relating to storage devices in /dev. Any ideas how this could happen,
>> what might I be doing wrong, or anything else I could try?
> Most likely missing kernel modules from the initrd, missing kernel
> configuration options enabled, and/or missing support in the kernel
> upstream...
> Hopefully it's one of the first two; good luck module/option hunting!

Thanks for the tip, I think I've muddled through enabling relevant
things in Linux to get past the partition problem at least.

I've seemingly still got some problem getting in to the
installer/getting a tty over the serial connection, but I'll send
another email about that.

Attachment: signature.asc
Description: PGP signature

reply via email to

[Prev in Thread] Current Thread [Next in Thread]