Re: [Health] Fw: Tryton-server

[Yusif Suleiman]

Hi Axel,

I have follow your suggestion for installing GNU_Health on a clean system, & I succeeded for the installation.

But I observed the following:

1. My "GNU Health Client application" only connect to the server when I am (online) connected to the Internet. See the attached installation screen.
2. After I started the client application, I am unable to add my local server. on 'manage profiles'. It can only be connected to that of testing (Profile: federation.gnuhealth.org; Host: federation.gnuhealth.org; Database: health36; & Username: admin) server. See the attached client application profile.
3. I try as a test to add patient_name but the system require Institute_name to be added first, to which I press f3 function key based on the documentation. I am yet unable to be succeed.
   

Please, kindly help me understand & resolve this stages.

Regards.

Yusuf

 

---

From: Health <health-bounces+yusifsuleiman=address@hidden> on behalf of Axel Braun <address@hidden>
Sent: Sunday, May 17, 2020 7:14 PM
To: General GNU Health discussion and help <address@hidden>
Subject: Re: [Health] Fw: Tryton-server

 

Hi,
Am Sonntag, 17. Mai 2020, 19:03:41 CEST schrieb Yusif Suleiman:
.
> I used VBox machine to install both the client & the server in same
> computer. Will that work?

Yes - his is the setup I usually use as well for testing

> I follow the procedure to configure the server, & it seem everything perfect
> according to the instruction (although no GUI, all are using terminals).

You need to have a GUI for the client to work - server can run without GUI

> Must I install both client & server for the client to work?

No

> do I need two
> computers to test run the GNU Health?

No (see first answer)

> May be I will reinstall system from the beginning again.

Probably.
On a clean system do the following (assuming you use Leap 15.1):
As user root, add GNU Health 3.6 series:

zypper ar -f https://download.opensuse.org/repositories/Application:/ERP:/
GNUHealth:/3.6/openSUSE_Leap_15.1/ gh36

Install GUN Health:
zypper in gnuhealth gnuhealth-client

run setup:
openSUSE-gnuhealth-setup setup

Now start the client, go to 'manage profiles' and add your local server.
That should be it...

HTH
Axel

IMG_6962.JPG
Description: IMG_6962.JPG

Installation screen.JPG
Description: Installation screen.JPG

client application profile.JPG
Description: client application profile.JPG