help-grub
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: grub with serial line configuration using PCI serial adapter


From: Andrei Borzenkov
Subject: Re: grub with serial line configuration using PCI serial adapter
Date: Mon, 17 Oct 2016 19:16:18 +0300
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.3.0

17.10.2016 16:16, rishat пишет:
> setserial -g /dev/ttyS[0-4]
> /dev/ttyS0, UART: 16550A, Port: 0xa880, IRQ: 21
...
> 
> When I tried to manually type a "serial --speed=115200 --unit=0 --word=8
> --parity=no --stop=1" in the grub command line it complains that COM1
> port don't exist. I have played with unit and port attributes but
> without any luck.
> 

Does "serial --port=a880 ..." work? If not, what exactly happens?

Note that you may need to load at least PCI bus driver (insmod pci) for
this to work.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]