[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Cannot boot GuixSD after system reconfigure

From: Roel Janssen
Subject: Re: Cannot boot GuixSD after system reconfigure
Date: Tue, 26 Sep 2017 21:24:55 +0200
User-agent: mu4e 0.9.18; emacs 25.1.1

Ludovic Courtès writes:

> Hi Roel,
> Roel Janssen <address@hidden> skribis:
>> I could generate a new system, but upon booting it, I was dropped to a
>> Guile REPL.
> Could you check what the error was?  (You can type “,error” at the REPL
> if the message disappeared.)
>> So it doesn't seem to work.  How can I troubleshoot from there?
>> I used the following configuration for the EFI partition:
>>   (file-system
>>     (title 'uuid)
>>     (device (uuid "72E5-26A0" 'fat32))
>>     (mount-point "/boot/efi")
>>     (needed-for-boot? #t)
>>     (type "vfat"))
> I don’t see yet what could possibly go wrong.  Note that
> ‘needed-for-boot?’ can be #f (it’s definitely not needed for boot), but
> both should work.
> Thanks,
> Ludo’.

I attached a photograph of the boot.  Unfortunately, it doesn't seem
very informative to me.

My partition layout is like to:

Device       Start       End   Sectors   Size Type
/dev/sda1     2048   1026047   1024000   500M EFI System
/dev/sda2  1026048   2050047   1024000   500M Linux filesystem
/dev/sda3  2050048 976773134 974723087 464.8G Linux filesystem

/dev/sda2 -> /boot
/dev/sda2 -> /boot/efi
/dev/sda3 -> /

Thanks for your efforts!

Kind regards,
Roel Janssen

Attachment: guixsd-boot-problem.jpg
Description: JPEG image

reply via email to

[Prev in Thread] Current Thread [Next in Thread]