Re: Unable to Install Rust 1.20.0 and Beyond

[Brian Woodcox]

Hi Mark,

I am marking this as *** RESOLVED ***.

Thanks for responding.  It got me thinking in a different direction.  I decided 
to delve into this problem by running the guix build command.

Turn out the failure was occurring during cargo tests.

Specifically:

...
  Running 
build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-gnu/release/deps/jobserver-dd0c6bf78d70e32b

running 3 tests
test jobserver_and_j ... ok
test jobserver_exists ... test jobserver_exists has been running for over 60 
seconds

At this point the system hangs forever.

After much internet searching without much for results, I decided on a hunch to 
increase the number of processors on my virtual machine from 1 to 2.

Tests now succeed!!  rustc is now installed.

Brian.

> On Dec 20, 2018, at 11:24 AM, Mark H Weaver <address@hidden> wrote:
> 
> Hi Brian,
> 
> Brian Woodcox <address@hidden> writes:
> 
>> I’m not able to install rust.  Initially, I was having problems with
>> 1.19.0 because of memory issues.  I fixed that by increasing the
>> memory and now 1.19.0 is installed.
>> 
>> Now that I have lots of memory 16GB, and lots of hard disk space, I cannot 
>> get 1.20.0 to install.
>> 
>> I am installing it via:
>> 
>> guix package -i rust
>> 
>> It appears to be hung.
>> 
>> guixbui+ 10572 0.0 0.2 127308 38260 ?  Ssl 01:03 0:17 guile
>> --no-auto-compile -L
>> /gnu/store/27qw1zxljzylvm9b3jbi343gh6cngazq-module-import
>> /gnu/store/iw20znxa586mkrv0156paq7z1ya9vcbq-rust-1.20.0-guile-builder
>> 
>> The cpu just sits at 0.0 for this process.  Normally it should be close to 
>> 100.
> 
> FWIW, I've built rust-1.20.0 locally on my x86_64 GuixSD system several
> times without running into this issue.  My system has only 4 GB of RAM
> and 8 GB of swap.  On this system, I build everything locally.
> 
> Hydra.gnu.org, our older build farm, has not run into this issue while
> building rust-1.20.0.  Binary substitutes for rust-1.20.0 are currently
> available from hydra.gnu.org, so you should simply be able to download
> them.
> 
I am able to install the binaries for these.

> Are you attempting to perform these builds within a VM?  If so, are you
> using QEMU, VirtualBox, or something else?

Yes, with VirtualBox.
> 
> I'm reminded of another unusual build failure that you encountered in
> 'guile' when you were first experimenting with Guix, when hydra.gnu.org
> was temporarily offline.  The failure was one that I'd not seen reported
> before or since.  As I recall, in that case you were attempting the
> build within VirtualBox.
> 
> With this in mind, I wonder if the virtualization is imperfect in some
> way that the rust-1.20.0 test suite is sensitive to.
> 
Yup, it’s imperfect with less than 2 processors in the virtual machine.

>> My var/log/guix/drvs/av/xcyxs39bdzs28kya500s4kpv0xvb9p-rust-1.20.0.drv.bz2 
>> file has the following at the end:
>> 
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1260)
>> ... ignored test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1273) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1306) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1321) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1338) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1358) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1409) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1440) ... ok
>> test /tmp/guix-build-rust-1.20.0.drv-0/rustc-
> 
> FYI, here's the most recent build of rust-1.20.0 on x86_64 on
> hydra.gnu.org:
> 
>  https://hydra.gnu.org/build/3218738
> 
> From there, you can retrieve the build log.  Here's an excerpt of the
> rust-1.20.0 build log from my own local system, including the point
> where your build gets stuck:
> 
> --8<---------------cut here---------------start------------->8---
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - Standard_library_traits_used_for_error_handling (line 1321) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - Standard_library_traits_used_for_error_handling (line 1338) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - Standard_library_traits_used_for_error_handling (line 1358) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - Standard_library_traits_used_for_error_handling (line 1409) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - Standard_library_traits_used_for_error_handling (line 1440) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - Standard_library_traits_used_for_error_handling (line 1466) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - Standard_library_traits_used_for_error_handling (line 1500) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - Standard_library_traits_used_for_error_handling (line 1514) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - The_Basics (line 132) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - The_Basics (line 148) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - The_Basics (line 173) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - The_Basics (line 197) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - The_Basics (line 232) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - The_Basics (line 266) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - The_Basics (line 283) ... ok
> test 
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>  - The_Basics (line 300) ... ok
> --8<---------------cut here---------------end--------------->8---
> 
Thanks for pointing me to this.

>       Mark