[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Question regarding qmk firmware

From: Fredrik Salomonsson
Subject: Re: Question regarding qmk firmware
Date: Tue, 10 Oct 2023 19:32:28 +0000

Hi Ekaitz,

Ekaitz Zarraga <> writes:

> Hi Fredrik,
> Now what you need to do is call to the `make-avr-toolchain` function from 
> `(gnu packages avr)` to get that.
> Maybe the easiest way is to create a `manifest.scm` where you do something 
> like this (i'm doing it by memory):
> ``` scheme
> (use-modules (gnu packages avr)
>              (gnu packages flashing-tools)
>              (gnu packages firmware))
> (packages->manifest (list (make-avr-toolchain) dfu-programmer qmk))
> ```
> Then use `guix shell -m manifest.scm`.
> There are other ways to do it, but I find this the easiest.

Thank you for pointing me in the right direction!  This is what I ended
up with:

 (gnu packages embedded)
 (gnu packages flashing-tools)
 (gnu packages firmware))

 (list (make-arm-none-eabi-nano-toolchain-6)
Then just simply run

guix shell -m manifest.scm -- qmk flash -kb ergodox_infinity -km plattfot -bl 
And that worked like a charm.

I had forgotten that my ergodox is using different tools than my kyria.
Also the nano lib threw me for a loop.  I was using the
`make-arm-none-eabi-toolchain-6` at first.

> You can even make a package for your firmware and let guix compile it
> for you (and maybe flash it too?).

Oh, that sounds that it might be useful.  Especially if it can flash it
too.  As I have a few keyboards and not all keymaps are pushed upstream


reply via email to

[Prev in Thread] Current Thread [Next in Thread]