[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
networking in hurd
From: |
Mohanaraj |
Subject: |
networking in hurd |
Date: |
Sun, 12 Aug 2001 23:20:55 +0800 |
Hello,
I am currently trying to get hurd to network here in my uni network. Our
computers are connected to a LAN and get our IPs etc assigned by DHCP. I have
a Dlink card which runs of a VIA Rhine chipset. I believe the card was
detected during startup(i saw the msg)
I have followed Neals guide and did the following command (the address i put
in was the address my linux partition was assigned) .In return my i eithere
get no response i.e the cursor doesnt accept any keyboard input or it does
return but when i try to ping nothing happens.
settrans -fgap /servers/socket/2 /hurd/pfinet -i eth0 \
-a 10.100.106.25 -g 10.100.106.254 -m 255.255.255.0
Nevertheless if i somewhat do a loopback as follow I can ping myself. Any
advice?
settrans -fgap /servers/socket/2 /hurd/pfinet -i eth0 \
-a 192.168.1.1 -g 192.168.1.1 -m 255.255.255.0
Thank you
Mohan
- networking in hurd,
Mohanaraj <=