[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
SV: K7 and K8 ; keyboard recognition; ADD NOTE
From: |
sigbj-st |
Subject: |
SV: K7 and K8 ; keyboard recognition; ADD NOTE |
Date: |
Sun, 16 Jan 2005 20:57:05 +0100 (CET) |
Additional note by sigbj-st:
I put an add here to the comments below:
Trying out the operations to reach X-window/DebianX under The Hurd on an other
machine - mach2- , the startx ran throughout the whole procedure ending up with
these messages:
'AddScreen/ScreenInit failed for driver 0
(EE) VGA(0) Depth 16 not supported by this driver. '
Does anybody want to see the /var/logXFree86..log, just tell me. This is the
first log trying out startx ever on mach2 (pc_machine_nr_2) The problems
related to my report below belongs to mach1
Hope you do not get confused. Sorry.
> From: sigbj-st [sigbj-st@frisurf.no]
> Sent: 2005-01-16 20:19:44 CET
> To: help-hurd@gnu.org
> Subject: SV: K7 and K8 ; keyboard recognition;
>
> After correcting the '--repeater=' to '--repeat=' I am getting tty1-6. The
> operation works nice and smooth on the K8.
> But on STARTX I receive 'reading XF86Config....cannot open the keyboard...(no
> such file)'
> I tried different choices during the installation K8_CD1 while running
> install.sh and gui.sh. Could it be that I messed the whole thing up doing
> wrong or unnecessary choices?
>
> The /etc/X11/XF86Config-4 looks like this at the keyboard section:
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "no"
> Option "XkbVariant" "no"
> Option "XkbOptions" "no"
> EndSection
>
> And by the way the mouse section:
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/psaux"
> Option "Protocol" "PS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver "mouse"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Just to show you.
> I am wondering what specificly should be written in the config-file, or if
> this has anything to do with the freeze_and_hang I get upon startx at that
> point. The required
> 'export LD_LIBRARY_PATH=/X11R6/lib' is in the /etc/profile and I even tried
> to specify to:
> export LD_LIBRARY_PATH=/X11R6/lib:$LD_LIBRARY_PATH
>
> Trying establishing symlinks is returned with '..kbd..already exist'. Can
> find no /dev/cons after 'console -d.....' operation. Should I find it? I
> tried to follow the DebianX in hurd.gnufans.org.
>
> ----------------------------------------------------------------------------------
>
> sigbj-st <sigbj-st@frisurf.no> writes:
>
> > The startx have the problem of recognizing the keyboard and hurd hangs
> > at this point.... The command 'console -d vga -d pc_kbd
> > --repeater=kbd -d pc_mouse --repeater=mouse -c /dev/cons /dev/vcs'
> > will not execute the expected result, and returns only with message to
> > check console --help.
>
> It seems like I was confused. Use --repeat instead of --repeater.
> After that you need to make some symlinks. This is described on the
> wiki:
>
> http://hurd.gnufans.org/bin/view/Hurd/DebianX
>
>