[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Build Problems on AIX
From: |
John W. Eaton |
Subject: |
Build Problems on AIX |
Date: |
Thu, 2 Oct 2003 23:14:05 -0500 |
On 30-Sep-2003, saurabh <address@hidden> wrote:
| Hi all,
| I am very new to octave and was recently given the task of building and
| installing it on our IBM AIX 5.1 machine. During the build, i ran into
| some problems and i am pasting the error messages below.
|
| As a comparison i also decided to build it on a linux machine (2.4.18/gcc
| 2.96-113) and it build without any error message and started to run
| without any problems.
|
| As for the AIX build, the build goes on for about 35 mins and i think
| everything gets built and then it fails at the last stage while linking
| the final executable i.e. octave.
| I would highly appreciate any help that you can offer.
|
| [...]
|
| g++ -I. -I.. -I../liboctave -I../src -I../libcruft/misc -I../glob
| -I../glob -DHAVE_CONFIG_H -g -O2 -Wall \
| -L.. -o octave \
| main.o balance.o besselj.o betainc.o chol.o colloc.o daspk.o
| dasrt.o dassl.o det.o eig.o expm.o fft.o fft2.o filter.o find.o
| fsolve.o gammainc.o getgrent.o getpwent.o getrusage.o givens.o
| hess.o ifft.o ifft2.o inv.o kron.o lpsolve.o lsode.o lu.o minmax.o
| odessa.o pinv.o qr.o quad.o qz.o rand.o schur.o sort.o sqrtm.o
| svd.o syl.o time.o \
| -L../liboctave -L../libcruft -L../src \
| ../src/liboctinterp.a ../liboctave/liboctave.a ../libcruft/libcruft.a
| ../glob/glob.o ../glob/fnmatch.o \
| -ll -lreadline -lcurses -lm
| -L/usr/local/lib/gcc-lib/powerpc-ibm-aix5.1.0.0/3.3
| -L/usr/local/lib/gcc-lib/powerpc-ibm-aix5.1.0.0/3.3/../../.. -lfrtbegin
| -lg2c -lm -lgcc_s
| /usr/local/lib/gcc-lib/powerpc-ibm-aix5.1.0.0/3.3/libgcc.a
| ld: 0711-317 ERROR: Undefined symbol: .Array<octave_value>::resize(int)
| ld: 0711-317 ERROR: Undefined symbol: .Array<octave_value>::resize(int,
| octave_value const&)
| ld: 0711-317 ERROR: Undefined symbol: .Array<octave_value>::~Array
| [in-charge]()
| ld: 0711-317 ERROR: Undefined symbol:
| .Array<octave_value>::Array[in-charge](int, octave_value const&)
| ld: 0711-317 ERROR: Undefined symbol:
| .Array<octave_value>::operator=(Array<octave_value> const&)
| ld: 0711-317 ERROR: Undefined symbol: .Array<octave_value>::~Array
| [not-in-charge]()
| ld: 0711-317 ERROR: Undefined symbol:
| .Array<octave_value>::Array[not-in-charge](int, octave_value const&)
| ld: 0711-317 ERROR: Undefined symbol:
| .Array<Matrix>::operator=(Array<Matrix> const&)
| ld: 0711-317 ERROR: Undefined symbol: .Array<Matrix>::~Array [in-charge]()
| ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more
| information.
| collect2: ld returned 8 exit status
| make[2]: *** [octave] Error 1
What version of gcc do you have? Someone reported a similar problem
when using gcc 3.3.1 on an HP system, and apparently the problem was
avoided by using gcc 3.2.3.
jwe
-------------------------------------------------------------
Octave is freely available under the terms of the GNU GPL.
Octave's home on the web: http://www.octave.org
How to fund new projects: http://www.octave.org/funding.html
Subscription information: http://www.octave.org/archive.html
-------------------------------------------------------------
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Build Problems on AIX,
John W. Eaton <=