[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: multi graph in Octave

From: Ben Abbott
Subject: Re: multi graph in Octave
Date: Mon, 01 Dec 2008 18:43:36 -0500

On Dec 1, 2008, at 2:28 PM, Oscar Bayona Candel wrote:

Hi all,

I have made a multi graph  using this instructions:

xlabel 'volumen'
ylabel 'presión'
xlabel 'volumen'
ylabel 'presión'

I have three questions:

First, how can I put an "on the top title"? Not on each Graph only a General title.

Running 3.0.3 you can try

x = 1:100;
y = 1./x;
Fluido = [x, 1i*y];
Masa = Fluido;

subplot (1, 2, 1)
plot (Fluido)
xlabel ('volumen')
ylabel ('presión')
title (' ')
subplot (1, 2, 2)
plot (Masa)
xlabel ('volumen')
ylabel ('presión')
title (' ')
ax = axes;
set(ax, 'visible', 'off')
title ('on the top title')

The *trick* I'm using is to add an extra axes and then to turn it visibility off.

In future versions you'll be able to modify the position and location of each axes. That will make what you want to do much easier.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]