[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: calculate SNR and watch a binary file
From: |
Markus Feldmann |
Subject: |
Re: calculate SNR and watch a binary file |
Date: |
Thu, 26 Mar 2009 20:24:49 +0100 |
User-agent: |
Mozilla-Thunderbird 2.0.0.19 (X11/20090103) |
Francesco Potorti` schrieb:
Have you applied my suggestions above?
Yes. :-)
But i got further information,
http://gnuradio.org/trac/wiki/Octave
and there exists an ready to use script, which i post further below.
i tried out and found some further documentation. But i am not sure.
As i assume, the IQ Signals should be a pair of 32 bit so i get 64 bit.
Here are the script to get the complex data out of the binary file and
save it to a vector:
###############################################################
function v = read_complex_binary (filename, count)
%% usage: read_complex_binary (filename, [count])
%%
%% open filename and return the contents as a column vector,
%% treating them as 32 bit complex numbers
%%
m = nargchk (1,2,nargin);
if (m)
usage (m);
end
if (nargin < 2)
count = Inf;
end
f = fopen (filename, 'rb');
if (f < 0)
v = 0;
else
t = fread (f, [2, count], 'float');
fclose (f);
v = t(1,:) + t(2,:)*i;
[r, c] = size (v);
v = reshape (v, c, r);
end
###############################################################
Leave the count parameter empty to save all data into the vector !
Then you have to use this function in octave and plot the data:
c=read_complex_binary('captire.dat')
plot([real(c), imag(c)])
I upload binary files. The first is with a sin signal:
http://rapidshare.com/files/213866747/usrp_output_64bit_complex_only_sin_signal.dat.html
and another one without any test signal, but only noise:
http://rapidshare.com/files/213867606/usrp_output_64bit_complex_only_noise.dat.html
I could plot both vectors, but it doesn't look like my
spectrum graphic,
http://img257.imageshack.us/img257/8017/nochstrender.jpg
I can't find any peak in the octave plot. Maybe the resolution is
not ok.
Maybe this are only the bits that are plotted and i hvae to collect them
first to 32bit pieces ???
Any hints ?
Regards Markus
- calculate SNR and watch a binary file, Markus Feldmann, 2009/03/25
- Re: calculate SNR and watch a binary file, Markus Feldmann, 2009/03/25
- Re: calculate SNR and watch a binary file, Francesco Potorti`, 2009/03/25
- Re: calculate SNR and watch a binary file, Markus Feldmann, 2009/03/26
- Re: calculate SNR and watch a binary file, Francesco Potorti`, 2009/03/26
- Re: calculate SNR and watch a binary file,
Markus Feldmann <=
- Re: calculate SNR and watch a binary file, Rob Mahurin, 2009/03/26
- Re: calculate SNR and watch a binary file, Markus Feldmann, 2009/03/26
- Re: calculate SNR and watch a binary file, Markus Feldmann, 2009/03/26
- Re: calculate SNR and watch a binary file, Rob Mahurin, 2009/03/27
- Re: calculate SNR and watch a binary file, feldmaus, 2009/03/27
- Re: calculate SNR and watch a binary file, Markus Feldmann, 2009/03/27
- Re: calculate SNR and watch a binary file, feldmaus, 2009/03/28