[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: help building octave 3.4.3
From: |
Tatsuro MATSUOKA |
Subject: |
Re: help building octave 3.4.3 |
Date: |
Sat, 31 Dec 2011 04:33:18 +0900 (JST) |
Hello
Please show first he what platform do you use Linux(Ubuntu, Debian,....), Mac,
or Windows.
> sh: makeinfo: not found
In building octave, dependency libraries and extra tools are required.
Your seem not to have makeinfo so that you may install it.
Regards
Tatsuro
--- On Sat, 2011/12/31, yashar mehmani wrote:
> Hi,
> I have recently been able to configure octave (with very little warnings at
> the end) and then I compiled it using "make" and once it got done it had the
> following errors and I was wondering what they were and what they meant and
> what I should do or shouldn't do to NOT have any problems in the future
> working with my octave:
>
> sh: makeinfo: not found
> error: makeinfo failed with exit status 127!
> error: called from:
> error: /home/yashar/Downloads/octave-3.4.3/doc/interpreter/mk_doc_cache.m
> at line 68, column 3
>
> make[3]: *** [doc-cache] Error 1
> make[3]: Leaving directory
> `/home/yashar/Downloads/octave-3.4.3/doc/interpreter'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/home/yashar/Downloads/octave-3.4.3/doc'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/home/yashar/Downloads/octave-3.4.3'
> make: *** [all] Error 2
>
> However if I type in "./run-octave" it works, but I obviously haven't checked
> all the features.
>
> The compilation took about 2hrs or 1:30hrs, if there is only ONE or FEW
> things that I should fix/download/install etc. to get rid of this can I avoid
> recompiling the whole thing or is that a no go?
>
> I'd appreciate your help very much,
> Yashar
> --
> Yashar Mehmani
> Dept. of Petroleum & Geosystems Engineering
> The University of Texas at Austin
> 1 University Station, C0300
> Austin, TX 78712-0228
>