[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Fwd: Re: Problems with printed figures
From: |
Terry Duell |
Subject: |
Fwd: Re: Problems with printed figures |
Date: |
Sat, 07 Dec 2013 16:15:29 +1100 |
User-agent: |
Opera Mail/12.16 (Linux) |
Sorry, the following response was sent direct to Ben, instead of to the
list.
That the problem with hitting "reply" when "reply to" address is not set.
------- Forwarded message -------
From: "Terry Duell" <address@hidden>
To: "Benjamin Abbott" <address@hidden>
Cc:
Subject: Re: Problems with printed figures
Date: Sat, 07 Dec 2013 16:03:49 +1100
Hello Ben,
On Sat, 07 Dec 2013 12:38:30 +1100, Benjamin Abbott <address@hidden>
wrote:
[snip]
Just testing this a bit further, I have run Ron's gnuplot script to
generate an svg, and that svg loads into my LO Writer correctly (using
"insert > picture > from file" ) but is incorrectly rendered by LO Draw.
I have "gnuplot-4.6.1-6.fc19.x86_64" and "octave-3.6.4-3.fc19.x86_64"
I would have guessed that Octave would use this gnuplot to generate the
svg file, but clearly the svg generated by Octave is different to that
generated directly by gnuplot.
Can anyone elaborate on what might be happening here?
Octave uses gnuplot to generate an eps file and then uses pstoedit,
epstool, transfig, or Ghostscript to convert to other formats.
OK.
I have just looked at having Octave generate eps, then run those eps files
through a script that runs 'pstoedit -f plot-svg in.eps out.svg'.
That does the conversion OK, and is probably usable with a few tweaks.
The eps out of Octave has 'BoundingBox: 50 50 626 482' and the svg from
the pstoedit conversion seems to OK in what I can see, but is displaced to
the right and down, such that part of the plot is cut off. See attached
screenshot.
I think I need to force the eps to move the plot within the boundingbox,
or force the pstoedit to place the svg differently within the 'paper'
boundaries.
I'm guessing a bit here, new territory. Is there a reasonable way around
this?
Cheers,
--
Regards,
Terry Duell
Screenshot.jpg
Description: JPEG image
- Re: Problems with printed figures, (continued)
- Re: Fwd: Re: Problems with printed figures, Ron.Simonson, 2013/12/06
- Re: Fwd: Re: Problems with printed figures, Terry Duell, 2013/12/06
- Re: Fwd: Re: Problems with printed figures, Dmitri A. Sergatskov, 2013/12/06
- Re: Fwd: Re: Problems with printed figures, Terry Duell, 2013/12/06
- Re: Fwd: Re: Problems with printed figures, Dmitri A. Sergatskov, 2013/12/06
- Re: Fwd: Re: Problems with printed figures, Terry Duell, 2013/12/06
- Re: Fwd: Re: Problems with printed figures, Terry Duell, 2013/12/06
- Re: Problems with printed figures, Benjamin Abbott, 2013/12/06
- Message not available
- Fwd: Re: Problems with printed figures,
Terry Duell <=
- Message not available
- Re: Problems with printed figures, Ben Abbott, 2013/12/07