[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
GnuPG 2.1.16 released
GnuPG 2.1.16 released
Fri, 18 Nov 2016 22:19:54 +0100
Gnus/5.13 (Gnus v5.13)
The GnuPG team is pleased to announce the availability of a new release
of GnuPG modern: Version 2.1.16. See below for a list of new features
and bug fixes.
The GNU Privacy Guard (GnuPG) is a complete and free implementation
of the OpenPGP standard which is commonly abbreviated as PGP.
GnuPG allows to encrypt and sign data and communication, features a
versatile key management system as well as access modules for public key
directories. GnuPG itself is a command line tool with features for easy
integration with other applications. A wealth of frontend applications
and libraries making use of GnuPG are available. Since version 2 GnuPG
provides support for S/MIME and Secure Shell in addition to OpenPGP.
GnuPG is Free Software (meaning that it respects your freedom). It can
be freely used, modified and distributed under the terms of the GNU
General Public License.
Three different branches of GnuPG are actively maintained:
- GnuPG "modern" (2.1) comes with the latest features and is suggested
for most users. This announcement is about this branch.
- GnuPG "stable" (2.0) is the currently mostly used branch which will be
maintain until 2017-12-31.
- GnuPG "classic" (1.4) is a simplified version of GnuPG, required on
very old platforms or to decrypt data created with PGP-2 keys.
You may not install "modern" (2.1) and "stable" (2.0) at the same time.
However, it is possible to install "classic" (1.4) along with any of the
Noteworthy changes in version 2.1.16
* gpg: New algorithm for selecting the best ranked public key when
using a mail address with -r, -R, or --locate-key.
* gpg: New option --with-tofu-info to print a new "tfs" record in
colon formatted key listings.
* gpg: New option --compliance as an alternative way to specify
options like --rfc2440, --rfc4880, et al.
* gpg: Many changes to the TOFU implementation.
* gpg: Improve usability of --quick-gen-key.
* gpg: In --verbose mode print a diagnostic when a pinentry is
* gpg: Remove code which warns for old versions of gnome-keyring.
* gpg: New option --override-session-key-fd.
* gpg: Option --output does now work with --verify.
* gpgv: New option --output to allow saving the verified data.
* gpgv: New option --enable-special-filenames.
* agent, dirmngr: New --supervised mode for use by systemd and alike.
* agent: By default listen on all available sockets using standard
* agent: Invoke scdaemon with --homedir.
* dirmngr: On Linux now detects the removal of its own socket and
* scd: Support ECC key generation.
* scd: Support more card readers.
* dirmngr: New option --allow-version-check to download a software
version database in the background.
* dirmngr: Use system provided CAs if no --hkp-cacert is given.
* dirmngr: Use a default keyserver if none is explicitly set
* gpgconf: New command --query-swdb to check software versions
against an copy of an online database.
* gpgconf: Print the socket directory with --list-dirs.
* tools: The WKS tools now support draft version -02.
* tools: Always build gpg-wks-client and install under libexec.
* tools: New option --supported for gpg-wks-client.
* The log-file option now accepts a value "socket://" to log to the
socket named "S.log" in the standard socket directory.
* Provide fake pinentries for use by tests cases of downstream
* Fixed many bugs and regressions.
* Many changes and improvements for the test suite.
A detailed description of the changes found in the 2.1 branch can be
found at <https://gnupg.org/faq/whats-new-in-2.1.html>.
Please be aware that there are still known bugs which we are working on.
Check https://bugs.gnupg.org, https://wiki.gnupg.org, and the mailing
list archives for known problems and workarounds.
Getting the Software
Please follow the instructions found at <https://gnupg.org/download/> or
GnuPG 2.1.16 may be downloaded from one of the GnuPG mirror sites or
direct from its primary FTP server. The list of mirrors can be found at
<https://gnupg.org/download/mirrors.html>. Note that GnuPG is not
available at ftp.gnu.org.
The GnuPG source code compressed using BZIP2 and its OpenPGP signature
are available here:
An installer for Windows without any graphical frontend except for a
very minimal Pinentry tool is available here:
The source used to build the Windows installer can be found in the same
directory with a ".tar.xz" suffix. This Windows installer comes with
TOFU support, translations, and support for Tor; it is still missing
HKPS and Web Key Directory support, though.
Checking the Integrity
In order to check that the version of GnuPG which you are going to
install is an original and unmodified one, you can do it in one of
the following ways:
* If you already have a version of GnuPG installed, you can simply
verify the supplied signature. For example to verify the signature
of the file gnupg-2.1.16.tar.bz2 you would use this command:
gpg --verify gnupg-2.1.16.tar.bz2.sig gnupg-2.1.16.tar.bz2
This checks whether the signature file matches the source file.
You should see a message indicating that the signature is good and
made by one or more of the release signing keys. Make sure that
this is a valid key, either by matching the shown fingerprint
against a trustworthy list of valid release signing keys or by
checking that the key has been signed by trustworthy other keys.
See the end of this mail for information on the signing keys.
* If you are not able to use an existing version of GnuPG, you have
to verify the SHA-1 checksum. On Unix systems the command to do
this is either "sha1sum" or "shasum". Assuming you downloaded the
file gnupg-2.1.16.tar.bz2, you run the command like this:
and check that the output matches the next line:
This version of GnuPG has support for 26 languages with Chinese, Czech,
French, German, Japanese, Norwegian, Russian, and Ukrainian being almost
completely translated. Due to expected changes in the next release some
strings pertaining to the TOFU code are not translated in this version.
If you used GnuPG in the past you should read the description of
changes and new features at doc/whats-new-in-2.1.txt or online at
The file gnupg.info has the complete user manual of the system.
Separate man pages are included as well but they have not all the
details available as are the manual. It is also possible to read the
complete manual online in HTML format at
or in Portable Document Format at
The chapters on gpg-agent, gpg and gpgsm include information on how
to set up the whole thing. You may also want search the GnuPG mailing
list archives or ask on the gnupg-users mailing lists for advise on
how to solve problems. Many of the new features are around for
several years and thus enough public knowledge is already available.
You may also want to follow our postings at <https://gnupg.org/blob/>
Please consult the archive of the gnupg-users mailing list before
reporting a bug <https://gnupg.org/documentation/mailing-lists.html>.
We suggest to send bug reports for a new release to this list in favor
of filing a bug at <https://bugs.gnupg.org>. If you need commercial
support check out <https://gnupg.org/service.html>.
If you are a developer and you need a certain feature for your project,
please do not hesitate to bring it to the gnupg-devel mailing list for
Maintenance and development of GnuPG is mostly financed by donations.
The GnuPG project employs 3 full-time developers, one part-timer, and
one contractor. They all work exclusivly on GnuPG and closely related
software like Libgcrypt, GPGME, and GPA. Please consider to donate via:
We have to thank all the people who helped with this release, be it
testing, coding, translating, suggesting, auditing, administering the
servers, spreading the word, answering questions on the mailing
lists, and donating money.
For the GnuPG hackers,
This is an announcement only mailing list. Please send replies only to
the gnupg-users'at'gnupg.org mailing list.
List of Release Signing Keys:
To guarantee that a downloaded GnuPG version has not been tampered by
malicious entities we provide signature files for all tarballs and
binary versions. The keys are also signed by the long term keys of
their respective owners. Current releases are signed by one or more
of these four keys:
2048R/4F25E3B6 2011-01-12 [expires: 2019-12-31]
Key fingerprint = D869 2123 C406 5DEA 5E0F 3AB5 249B 39D2 4F25 E3B6
Werner Koch (dist sig)
rsa2048/E0856959 2014-10-29 [expires: 2019-12-31]
Key fingerprint = 46CC 7308 65BB 5C78 EBAB ADCF 0437 6F3E E085 6959
David Shaw (GnuPG Release Signing Key) <dshaw 'at' jabberwocky.com>
rsa2048/33BD3F06 2014-10-29 [expires: 2020-10-30]
Key fingerprint = 031E C253 6E58 0D8E A286 A9F2 2071 B08A 33BD 3F06
NIIBE Yutaka (GnuPG Release Key) <gniibe 'at' fsij.org>
rsa2048/7EFD60D9 2014-10-19 [expires: 2020-12-31]
Key fingerprint = D238 EA65 D64C 67ED 4C30 73F2 8A86 1B1C 7EFD 60D9
Werner Koch (Release Signing Key)
You may retrieve these keys from a keyserver using this command
gpg --keyserver hkp://keys.gnupg.net --recv-keys \
249B39D24F25E3B6 04376F3EE0856959 \
The keys are also available at https://gnupg.org/signature_key.html and
in any recently released GnuPG tarball in the file g10/distsigkey.gpg .
Note that this mail has been signed by a different key.
Die Gedanken sind frei. Ausnahmen regelt ein Bundesgesetz.
Description: PGP signature
|[Prev in Thread]
||[Next in Thread]|
- GnuPG 2.1.16 released,
Werner Koch <=