[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Info-gnucap] gnucap development snapshot 2008-01-30

From: al davis
Subject: [Info-gnucap] gnucap development snapshot 2008-01-30
Date: Wed, 30 Jan 2008 22:17:41 -0500
User-agent: KMail/1.9.7

There is a new snapshot available ...

Models (optional) have also been updated:

Another optional package contains some tools:

This snapshot provides:

1. Root circuit in Spectre or Verilog format. (in addition to 
Spice format)

2. Command syntax in spectre format (when lang=spectre).  In 
general, command syntax depends on the language.  Language 
choices are: spice, acs, spectre, verilog.

3. Case sensitivity and units (SI or Spice) normally tracks the 
language, but can be overridden.

As usual, to get started you need only the main package 
gnucap-2008-01-30.tar.gz .  The other "models" packages contain 
the exact models from the various sources.  If you need a jfet, 
I recommend the one in "spice3f5".  If you need a BSIM model, 
the obvious choice is the "bsim" package, which has all of 
them.  The "ngspice17" package contains a few models not 
available elsewhere, such as "vbic".

If you need others, let me know.  Others, such as Josephson 
junction, are available, but I have not ported them yet.  
Porting a Spice model usually requires two files, a "Makefile" 
and a "wrapper.h", and no other changes.

reply via email to

[Prev in Thread] Current Thread [Next in Thread]