[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Dividing ties and adjusting ties in an arpeggiated chord
From: |
bruys . |
Subject: |
Dividing ties and adjusting ties in an arpeggiated chord |
Date: |
Sat, 9 Apr 2011 15:31:31 +1000 |
Hello again,
I'm sorry to have to make further enquiries, but I'm flailing around here.
It seems that I need to divide the arpeggiated chord into separate
parts, so I can apply tweaks to each part separately.
Sorry about the length of the following code. It is for only one
arpeggiated chord, and I haven't been able to apply the tweaks yet.
When I put all the parts in the one voice context, I can get the notes
to line up, hooray. But, Lilypond ignores my explicit request to
direct the tie on the note d (d'') up (/tieUp), even though a major
collision results.
Part 2 to follow!
Thanks,
bruys
\version "2.12.3"
partOne = {
\set tieWaitForNote = ##t % for arpeggiated ties
\once \override Beam #'positions = #'(5.0 . 5.0) % raise beam to avoid
% collision with top tie
\grace {
\tieUp d''16[~ s16 s16 s16 s16]
}
\once \override Stem #'length = #'6.0 % lengthen stem to match height of
% grace notes - don't know why this
% needs to be 6.0 instead of 5.0
\stemUp
d''4
}
partTwo = {
\set tieWaitForNote = ##t % for arpeggiated ties
\once \override Beam #'positions = #'(5.0 . 5.0)
\grace {
s16[ \tieUp fis''16~ s16 s16 s16]
}
\once \override Stem #'length = #'6.0
\stemUp
fis''4
}
partThree = {
\set tieWaitForNote = ##t % for arpeggiated ties
\once \override Beam #'positions = #'(5.0 . 5.0) % raise beam to avoid
% collision with top tie
\grace {
s16[ s16 \tieUp b'16~ s16 s16]
}
\once \override Stem #'length = #'6.0 % lengthen stem to match height of
% grace notes - don't know why this
% needs to be 6.0 instead of 5.0
\stemUp
b'4
}
partFour = {
\set tieWaitForNote = ##t % for arpeggiated ties
\once \override Beam #'positions = #'(5.0 . 5.0) % raise beam to avoid
% collision with top tie
\grace {
s16[ s16 s16 \tieDown d'16~ s16]
}
\once \override Stem #'length = #'6.0 % lengthen stem to match height of
% grace notes - don't know why this
% needs to be 6.0 instead of 5.0
\stemUp
d'4
}
partFive = {
\set tieWaitForNote = ##t % for arpeggiated ties
\once \override Beam #'positions = #'(5.0 . 5.0) % raise beam to avoid
% collision with top tie
\grace {
s16[ s16 s16 s16 \tieDown gis'16~]
}
\once \override Stem #'length = #'6.0 % lengthen stem to match height of
% grace notes - don't know why this
% needs to be 6.0 instead of 5.0
\stemUp
gis'4
}
ignore = \override NoteColumn #'ignore-collision = ##t
revertIgnore = \override NoteColumn #'ignore-collision = ##f
\score {
{ \ignore
<<
\partOne
\partTwo
\partThree
\partFour
\partFive
>>
\revertIgnore
\tieNeutral
}
}
Arpeggiated Chord Example 3_.png
Description: PNG image
- Dividing ties and adjusting ties in an arpeggiated chord, bruys ., 2011/04/01
- Re: Dividing ties and adjusting ties in an arpeggiated chord, -Eluze, 2011/04/02
- Message not available
- Fwd: Dividing ties and adjusting ties in an arpeggiated chord, bruys ., 2011/04/02
- Re: Fwd: Dividing ties and adjusting ties in an arpeggiated chord, madMuze, 2011/04/03
- Re: Fwd: Dividing ties and adjusting ties in an arpeggiated chord, bruys ., 2011/04/03
- Dividing ties and adjusting ties in an arpeggiated chord,
bruys . <=
- Dividing ties and adjusting ties in an arpeggiated chord, bruys ., 2011/04/09
- Re: Dividing ties and adjusting ties in an arpeggiated chord, -Eluze, 2011/04/09
- Re: Dividing ties and adjusting ties in an arpeggiated chord, bruys ., 2011/04/09
- Re: Dividing ties and adjusting ties in an arpeggiated chord, -Eluze, 2011/04/10
- Re: Dividing ties and adjusting ties in an arpeggiated chord, bruys ., 2011/04/10
Re: Dividing ties and adjusting ties in an arpeggiated chord, James Lowe, 2011/04/10