|
From: | Lau KhimChuen |
Subject: | Re: [Linphone-developers] Linphone-android, Prepare_sources.sh at > >> cygwin with the message 'VP8 prepare stage failed.' |
Date: | Thu, 9 Aug 2012 09:22:03 +0000 |
After installed the toolchains from CodeSourcery, no more complain about the 'arm-none-linux-gnueabi-gcc'.
Thanks. But the issue now is cannot find the input file from /tmp directory. - The input file is in the /tmp directory (i purposely commented out the remove file function 'rm' so that the tmp file will always be there), and it just cannot find it. clean_temp_files() { log "Hello World!" # rm -f ${TMP_C} ${TMP_H} ${TMP_O} ${TMP_X} ${TMP_ASM} } - try 'arm-none-linux-gnueabi-gcc /tmp/a.c' will get 'No such file or directory', but it can compile without the /tmp by putting in the same folder - its no problem with the 'gcc' even in /tmp folder, its work with gcc compiler. - permission looks alright : address@hidden / $ ls -l total 213 drwxr-xr-x+ 1 kclau root 0 Aug 8 15:49 bin dr-xr-xr-x 1 kclau Domain Users 0 Aug 9 16:27 cygdrive -rwxr-xr-x 1 kclau root 57 Jul 28 2011 Cygwin.bat -rw-r--r-- 1 kclau root 157097 Aug 3 17:12 Cygwin.ico -rw-r--r-- 1 kclau root 53342 Aug 3 17:12 Cygwin-Terminal.ico drwxr-xr-x+ 1 kclau Domain Users 0 Aug 3 16:09 dev drwxr-xr-x+ 1 kclau root 0 Aug 3 17:09 etc drwxrwxrwt+ 1 kclau root 0 Jul 28 2011 home drwxr-xr-x+ 1 kclau root 0 Aug 3 16:34 lib drwxr-xr-x+ 1 kclau root 0 Jul 28 2011 opt dr-xr-xr-x 13 kclau Domain Users 0 Aug 9 16:27 proc drwxr-xr-x+ 1 kclau root 0 Jul 28 2011 sbin drwxr-xr-x+ 1 kclau Domain Users 0 Jul 28 2011 srv drwxrwxrwx+ 1 kclau root 0 Aug 9 15:43 tmp drwxr-xr-x+ 1 kclau root 0 Aug 3 16:23 usr drwxr-xr-x+ 1 kclau root 0 Jul 28 2011 var Anyone faced the same issue before? Thanks & regards KC Lau. ------------------------------------------config.err log --------------------------------------- # ./configure --target=armv7-android-gcc --sdk-path=/cygdrive/c/android-ndk-r8b --enable-error-concealment Configuring selected codecs enabling vp8_encoder enabling vp8_decoder Configuring for target 'armv7-android-gcc' enabling armv7 enabling armv6 enabling armv5te enabling fast_unaligned add_asflags --defsym ARCHITECTURE=7 check_cflags -march=armv7-a -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp check_cc -march=armv7-a -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp BEGIN /tmp/vpx-conf-2868-24275.c 1 int x; END /tmp/vpx-conf-2868-24275.c arm-none-linux-gnueabi-gcc -march=armv7-a -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp -c -o /tmp/vpx-conf-2868-809.o /tmp/vpx- conf-2868-24275.c arm-none-linux-gnueabi-gcc.exe: /tmp/vpx-conf-2868-24275.c: No such file or directory arm-none-linux-gnueabi-gcc.exe: no input files add_asflags -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp enabling realtime_only check_cflags -O3 check_cc -O3 BEGIN /tmp/vpx-conf-2868-24275.c 1 int x; END /tmp/vpx-conf-2868-24275.c /cygdrive/c/android-ndk-r8b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/windows/bin/arm-linux-androideabi-gcc -- sysroot=/cygdrive/c/android-ndk-r8b/platforms/android-14/arch-arm -O3 -c -o /tmp/vpx-conf-2868-809.o /tmp/vpx-conf-2868-24275.c arm-linux-androideabi-gcc.exe: /tmp/vpx-conf-2868-24275.c: No such file or directory arm-linux-androideabi-gcc.exe: no input files . . . . . . . . . . . . . . . . . . . . . . . . ------------------------------------------config.err log --------------------------------------- > Message: 1 > Date: Tue, 7 Aug 2012 12:11:14 -0500 > From: "Don Thorp (address@hidden)" <address@hidden> > To: address@hidden > Subject: Re: [Linphone-developers] Linphone-developers Digest, Vol > 114, Issue 5 > Message-ID: > <address@hidden> > Content-Type: text/plain; charset=ISO-8859-1 > > I had a similar issue until I put the pre-built toolchain in the path. > You might read through this google group on how to create the > standalone toolchains. > https://groups.google.com/forum/?fromgroups#!topic/android-ndk/6C55SW74_KA > > On Tue, Aug 7, 2012 at 5:01 AM, Lau KhimChuen <address@hidden> wrote: > > Hi! > > Im sorry, I had missed some of the useful info in config.err : > > > > line 271: arm-none-linux-gnueabi-gcc: command not found > > > > > > Is it because of this gcc missing? > > I am getting it from CodeSourcery, hope it work. > > > > > > --------------------------------------------- config.err > > ----------------------------------------------------------------- > > # ./configure --target=armv7-android-gcc > > --sdk-path=/cygdrive/c/android-ndk-r8b --enable-error-concealment > > > > Configuring selected codecs > > enabling vp8_encoder > > enabling vp8_decoder > > Configuring for target 'armv7-android-gcc' > > enabling armv7 > > enabling armv6 > > enabling armv5te > > enabling fast_unaligned > > add_asflags --defsym ARCHITECTURE=7 > > check_cflags -march=armv7-a -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp > > check_cc -march=armv7-a -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp > > BEGIN /tmp/vpx-conf-5704-20064.c > > 1 int x; > > END /tmp/vpx-conf-5704-20064.c > > arm-none-linux-gnueabi-gcc -march=armv7-a -mcpu=cortex-a8 -mfpu=neon > > -mfloat-abi=softfp -c -o /tmp/vpx-conf-5704-12736.o > > /tmp/vpx-conf-5704-20064.c > > ./build/make/configure.sh: line 271: arm-none-linux-gnueabi-gcc: command not > > found > > add_asflags -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp > > enabling realtime_only > > check_cflags -O3 > > check_cc -O3 > > BEGIN /tmp/vpx-conf-5704-20064.c > > 1 int x; > > END /tmp/vpx-conf-5704-20064.c > > /cygdrive/c/android-ndk-r8b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/windows/bin/arm-linux-androideabi-gcc > > --sysroot=/cygdrive/c/android-ndk-r8b/platforms/android-14/arch-arm -O3 -c > > -o /tmp/vpx-conf-5704-12736.o /tmp/vpx-conf-5704-20064.c > > arm-linux-androideabi-gcc.exe: /tmp/vpx-conf-5704-20064.c: No such file or > > directory > > arm-linux-androideabi-gcc.exe: no input files > > check_cflags -fPIC > > check_cc -fPIC > > . . . . > > . . . . > > . . . . > > ------------------------------------end ------------------------------- > > > > > > > > Thanks & regards, > > KC Lau. > > > > > > > > > > > > > > > >> From: address@hidden > >> Subject: Linphone-developers Digest, Vol 114, Issue 5 > >> To: address@hidden > >> Date: Mon, 6 Aug 2012 12:00:36 -0400 > > > >> > >> Send Linphone-developers mailing list submissions to > >> address@hidden > >> > >> To subscribe or unsubscribe via the World Wide Web, visit > >> https://lists.nongnu.org/mailman/listinfo/linphone-developers > >> or, via email, send a message with subject or body 'help' to > >> address@hidden > >> > >> You can reach the person managing the list at > >> address@hidden > >> > >> When replying, please edit your Subject line so it is more specific > >> than "Re: Contents of Linphone-developers digest..." > >> > >> > >> Today's Topics: > >> > >> 1. Linphone-android, Prepare_sources.sh at cygwin with the > >> message 'VP8 prepare stage failed.' (Lau KhimChuen) > >> > >> > >> ---------------------------------------------------------------------- > >> > >> Message: 1 > >> Date: Mon, 6 Aug 2012 09:14:43 +0000 > >> From: Lau KhimChuen <address@hidden> > >> To: <address@hidden> > >> Subject: [Linphone-developers] Linphone-android, Prepare_sources.sh at > >> cygwin with the message 'VP8 prepare stage failed.' > >> Message-ID: <address@hidden> > >> Content-Type: text/plain; charset="iso-8859-1" > >> > >> > >> Hi! I was trying to start my Linphone Android project, and started > >> configuration by executing the ./prepare_sources.sh (from cygwin), it showed > >> me the failed message as follow : > >> > >> > >> --------------- start -------------------------- > >> > >> Configuring selected codecs > >> enabling vp8_encoder > >> enabling vp8_decoder > >> Configuring for target 'armv7-android-gcc' > >> enabling armv7 > >> enabling armv6 > >> enabling armv5te > >> enabling fast_unaligned > >> enabling realtime_only > >> > >> Unable to invoke compiler: > >> /cygdrive/c/android-ndk-r8b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/windows/bin/arm-linux- > >> > >> androideabi-gcc > >> --sysroot=/cygdrive/c/android-ndk-r8b/platforms/android-14/arch-arm > >> > >> Configuration failed. This could reflect a misconfiguration of your > >> toolchains, improper options selected, or another problem. If you > >> don't see any useful error messages above, the next step is to look > >> at the configure error log file (config.err) to determine what > >> configure was trying to do when it died. > >> VP8 prepare stage failed. > >> > >> --------------- end log ----------------------- > >> > >> > >> My sources & versions : > >> linphone-android source => git clone > >> git://git.linphone.org/linphone-android.git --recursive > >> cygwin version ( CYGWIN_NT-5.1 lpcx037 1.7.16(0.262/5/3) 2012-07-20 22:55 > >> i686 Cygwin ) > >> ndk-r8b > >> Window XP OS > >> > >> > >> > >> Had tried to search and updated the latest sdk, ndk and cygwin also cannot > >> resolve the issue. > >> > >> Any pointers would be greatly appreciated! > >> > >> Thanks and regards, > >> KC Lau. > >> -------------- next part -------------- > >> An HTML attachment was scrubbed... > >> URL: > >> <http://lists.nongnu.org/archive/html/linphone-developers/attachments/20120806/16ccbeb7/attachment.html> > >> > >> ------------------------------ > >> |
[Prev in Thread] | Current Thread | [Next in Thread] |