linphone-developers
[Top][All Lists]
Advanced
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Linphone-developers] [Linphone-users] [Beta] Linphone 3.7.0

From: Charles Hamilton
Subject: Re: [Linphone-developers] [Linphone-users] [Beta] Linphone 3.7.0
Date: Wed, 15 Jan 2014 00:23:59 -0500
Hi again, Guillaume--

I've gone ahead and done a build for Debian. The errors are the same as they are for the Ubuntu install.

I look forward to your thoughts.

Regards,
Charles


On Tue, Jan 14, 2014 at 9:41 AM, Charles Hamilton <address@hidden> wrote:
Hello again, Guillaume--

I'm wondering if you have any guidance on the errors I described in my thread. Before moving on to a Debian build with your preview release, I'd like to have an idea what might be going wrong with Ubuntu since I seem to recall having a similar error with an earlier src compile on Debian, as well.

Thanks very much for your attention.
Charles



On Sat, Jan 11, 2014 at 11:07 PM, Charles Hamilton <address@hidden> wrote:
Hi Guillaume,

I've now done a first build on Ubuntu 12.04.2 for the Beaglebone Black. I did a very straightforward build from the new src linphone-3.6.99-beta.tar.gz and
belle-sip-1.2.4.tar.gz, using my (slightly) edited version of your ReadMe. The only exception was the switch ./configure --disable-strict, which Simon Morlat suggested that I use some months ago to address a build error I was getting in the prior version, and which was recurring in this new build.

I'll move on to Debian and probably Arch Linux shortly, but wanted to first get your thoughts on the best way to address the Ubuntu errors below.

The results are the following:

1) Video window -- video window only shows black (using webcam that performed fine in prior Linphone versions)
2) Call connection -- when a call is answered either by the BBB, or when the BBB initiates the call, the app crashes


FROM LINPHONEC
ortp-error-Could not find suitable format or Xv port to work with.
ortp-error-Could not find suitable format or Xv port to work with.
ortp-error-Could not find suitable format or Xv port to work with.
ortp-error-Could not find suitable format or Xv port to work with.
ortp-error-Could not find suitable format or Xv port to work with.


FROM DEBUG WINDOW
message: Using (r/w) config information from .linphonerc
message: Initializing LinphoneCore 3.6.99
message: oRTP-0.22.1 initialized.
message: assigning PCMU/8000 payload type number 0
message: assigning GSM/8000 payload type number 3
message: assigning PCMA/8000 payload type number 8
message: assigning speex/8000 payload type number 110
message: assigning speex/16000 payload type number 111
message: assigning speex/32000 payload type number 112
message: assigning telephone-event/8000 payload type number 101
message: assigning G722/8000 payload type number 9
message: assigning H263/90000 payload type number 34
message: assigning H263-1998/90000 payload type number 98
message: assigning MP4V-ES/90000 payload type number 99
message: assigning H264/90000 payload type number 102
message: assigning VP8/90000 payload type number 103
message: assigning theora/90000 payload type number 97
message: assigning x-snow/90000 payload type number 96
message: assigning iLBC/8000 payload type number 100
message: assigning AMR/8000 payload type number 104
message: assigning AMR-WB/16000 payload type number 105
message: assigning 1015/8000 payload type number 106
message: assigning G726-16/8000 payload type number 107
message: assigning G726-24/8000 payload type number 108
message: assigning G726-32/8000 payload type number 109
message: assigning G726-40/8000 payload type number 113
message: assigning AAL2-G726-16/8000 payload type number 114
message: assigning AAL2-G726-24/8000 payload type number 115
message: assigning AAL2-G726-32/8000 payload type number 116
message: assigning AAL2-G726-40/8000 payload type number 117
message: assigning SILK/8000 payload type number 118
message: assigning SILK/12000 payload type number 119
message: assigning SILK/16000 payload type number 120
message: assigning SILK/24000 payload type number 121
message: assigning G729/8000 payload type number 18
message: assigning mpeg4-generic/22050 payload type number 122
message: assigning mpeg4-generic/44100 payload type number 123
message: assigning opus/48000 payload type number 124
message: assigning iSAC/16000 payload type number 125
message: assigning 1016/8000 payload type number 1
message: assigning GSM/8000 payload type number 3
message: assigning G723/8000 payload type number 4
message: assigning LPC/8000 payload type number 7
message: assigning PCMA/8000 payload type number 8
message: assigning G722/8000 payload type number 9
message: assigning L16/44100 payload type number 10
message: assigning L16/44100 payload type number 11
message: assigning G729/8000 payload type number 18
message: assigning H261/90000 payload type number 31
message: assigning MPV/90000 payload type number 32
message: assigning H263/90000 payload type number 34
message: Mediastreamer2 2.9.2 (git: unknown) starting.
message: CPU count set to 1
message: ms_base_init() done
message: Registering all soundcard handlers
message: Card 'ALSA: default device' added
warning: Could not attach mixer to card: Invalid argument
message: Card 'ALSA: TI BeagleBone Black' added
warning: Could not attach mixer to card: Invalid argument
message: Card 'ALSA: Generic USB Audio Device' added
warning: Could not attach mixer to card: Invalid argument
message: Card 'ALSA: IceCam2' added
message: Card 'OSS: /dev/dsp' added
message: Card 'OSS: /dev/dsp1' added
message: Card 'OSS: /dev/dsp2' added
message: Registering all webcam handlers
message: Webcam V4L2: /dev/video0 added
message: Webcam StaticImage: Static picture added
message: ms_voip_init() done
message: Loading ms plugins from [/usr/local/lib/mediastreamer/plugins]
message: Loading plugin /usr/local/lib/mediastreamer/plugins/libmsamr.so...
message: libmsamr 0.0.2 plugin loaded
message: Plugin loaded (/usr/local/lib/mediastreamer/plugins/libmsamr.so)
message: Loading plugin /usr/local/lib/mediastreamer/plugins/libmssilk.so.0...
warning: Fail to load plugin /usr/local/lib/mediastreamer/plugins/libmssilk.so.0 : /usr/local/lib/mediastreamer/plugins/libmssilk.so.0: undefined symbol: SKP_Silk_resampler_private_up2_HQ
message: Loading plugin /usr/local/lib/mediastreamer/plugins/libmsx264.so.0...
message: ms264-1.4.3 plugin registered.
message: Plugin loaded (/usr/local/lib/mediastreamer/plugins/libmsx264.so.0)
message: Loading plugin /usr/local/lib/mediastreamer/plugins/libmsilbc.so.0.0.0...
message: Plugin loaded (/usr/local/lib/mediastreamer/plugins/libmsilbc.so.0.0.0)
message: Loading plugin /usr/local/lib/mediastreamer/plugins/libmsbcg729.so.0.0.0...
message:  libmsbcg729 0.1 plugin loaded
message: Plugin loaded (/usr/local/lib/mediastreamer/plugins/libmsbcg729.so.0.0.0)
message: Sal nat helper [enabled]
message: Cannot open directory /usr/local/lib/liblinphone/plugins: No such file or directory
message: linphone_core_set_playback_gain_db(): no active call.
message: linphone_core_set_mic_gain_db(): no active call.
message: Sal nat helper [enabled]
message: Sal use rport [enabled]
message: Could not find encoder for 1016
message: Could not find decoder for 1016
message: Could not find encoder for GSM
message: Could not find decoder for GSM
message: Could not find encoder for G723
message: Could not find decoder for G723
message: Could not find encoder for LPC
message: Could not find decoder for LPC
message: Could not find encoder for telephone-event
message: Could not find decoder for telephone-event
message: Could not find encoder for AMR-WB
message: Could not find decoder for AMR-WB
message: Could not find encoder for 1015
message: Could not find decoder for 1015
message: Could not find encoder for G726-16
message: Could not find decoder for G726-16
message: Could not find encoder for G726-24
message: Could not find decoder for G726-24
message: Could not find encoder for G726-32
message: Could not find decoder for G726-32
message: Could not find encoder for G726-40
message: Could not find decoder for G726-40
message: Could not find encoder for AAL2-G726-16
message: Could not find decoder for AAL2-G726-16
message: Could not find encoder for AAL2-G726-24
message: Could not find decoder for AAL2-G726-24
message: Could not find encoder for AAL2-G726-32
message: Could not find decoder for AAL2-G726-32
message: Could not find encoder for AAL2-G726-40
message: Could not find decoder for AAL2-G726-40
message: Could not find encoder for SILK
message: Could not find decoder for SILK
message: Could not find encoder for SILK
message: Could not find decoder for SILK
message: Could not find encoder for SILK
message: Could not find decoder for SILK
message: Could not find encoder for SILK
message: Could not find decoder for SILK
message: Could not find encoder for mpeg4-generic
message: Could not find decoder for mpeg4-generic
message: Could not find encoder for mpeg4-generic
message: Could not find decoder for mpeg4-generic
message: Could not find encoder for opus
message: Could not find decoder for opus
message: Could not find encoder for iSAC
message: Could not find decoder for iSAC
message: Could not find encoder for H261
message: Could not find decoder for H261
message: Could not find encoder for MPV
message: Could not find decoder for MPV
message: Could not find encoder for theora
message: Could not find decoder for theora
message: Sal use rport [enabled]
message: sal_unlisten_ports done
message: Creating listening point [0x123f30] on [sip:0.0.0.0:5060;transport=UDP]
message: Notifying all friends that we are [online]
message: New local ip address is 192.168.1.67
message: Network state is now [UP]
message: belle_sip_client_transaction_send_request(): waiting channel to be ready
message: channel 0x1f8dd8: state RES_IN_PROGRESS
message: transaction [0x21f0c8] channel state changed to [RES_IN_PROGRESS]
message: Resolver is using DNS server(s):
message: 192.168.1.254
message: resolver_process_data dns_res_check() in progress
message: DNS resolution awaiting response, queued to main loop
message: Neither Expires header nor corresponding Contact header found, checking from original request
message: Refresher [0x21f4a0] takes ownership of transaction [0x21f0c8]
message: Proxy config [0x127a38] for identity [sip:address@hidden] moving from state [LinphoneRegistrationNone] to [LinphoneRegistrationProgress]
message: resolver_process_data dns_res_check() in progress
message: resolver_process_data dns_res_check() in progress
message: resolver_process_data dns_res_check() in progress
message: resolver_process_data dns_res_check() in progress
message: resolver_process_data dns_res_check() in progress
message: resolver_process_data dns_res_check() in progress
message: resolver_process_data dns_res_check() in progress
message: resolver_process_data dns_res_check() in progress
message: resolver_process_data dns_res_check() in progress
message: No SRV result for [_sip._udp.sip.linphone.org], trying A/AAAA.
message: Resolver is using DNS server(s):
message: 192.168.1.254
message: resolver_process_data dns_res_check() in progress
message: DNS resolution awaiting response, queued to main loop
message: sip.linphone.org resolved to 91.121.209.194
message: channel 0x1f8dd8: state RES_DONE
message: transaction [0x21f0c8] channel state changed to [RES_DONE]
message: channel 0x1f8dd8: state CONNECTING
message: transaction [0x21f0c8] channel state changed to [CONNECTING]
message: Trying to connect to [UDP://91.121.209.194:5060]
message: Channel has local address 192.168.1.67:5060
message: channel 0x1f8dd8: state READY
message: transaction [0x21f0c8] channel state changed to [READY]
message: Changing [client] [REGISTER] transaction [0x21f0c8], from state [INIT] to [TRYING]
message: channel [0x1f8dd8]: message sent to [UDP://sip.linphone.org:5060], size: [467] bytes
REGISTER sip:sip.linphone.org SIP/2.0
Via: SIP/2.0/UDP 192.168.1.67:5060;branch=z9hG4bK.bO6eEeDfM;rport
From: <sip:address@hidden>;tag=W4WM7gL-i
To: sip:address@hidden
CSeq: 20 REGISTER
Call-ID: acLlp0GERz
Max-Forwards: 70
Supported: replaces, outbound
Contact: <sip:address@hidden>;+sip.instance="<urn:uuid:401d52e9-57d3-40fb-9d27-a21054a66dbd>"
Expires: 3600
User-Agent: Linphone/3.6.99 (belle-sip/1.2.4)


message: channel [0x1f8dd8]: received [508] new bytes from [UDP://sip.linphone.org:5060]:
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.1.67:5060;branch=z9hG4bK.bO6eEeDfM;rport
Record-Route: <sip:address@hidden:5060;lr>
From: <sip:address@hidden>;tag=W4WM7gL-i
To: <sip:mynameheresip.linphone.org>;tag=7B2m8UDrD7N3K
Call-ID: acLlp0GERz
CSeq: 20 REGISTER
WWW-Authenticate: Digest realm="sip.linphone.org", nonce="y3V81gAAAACdQ9hmAACGJL46cwcAAAAA", opaque="+GNywA==", algorithm=MD5, qop="auth"
server: Flexisip/0.6.0 (sofia-sip-nta/2.0)
Content-Length: 0


message: channel [0x1f8dd8] [508] bytes parsed
message: channel [0x1f8dd8]: discovered public ip and port are [192.168.1.67:5060]
message: Found transaction matching response.
message: Changing [client] [REGISTER] transaction [0x21f0c8], from state [TRYING] to [COMPLETED]
message: Auth info found for [mynamehere] realm [sip.linphone.org]
message: Changing [client] [REGISTER] transaction [0x2532f0], from state [INIT] to [TRYING]
message: channel [0x1f8dd8]: message sent to [UDP://sip.linphone.org:5060], size: [720] bytes
REGISTER sip:sip.linphone.org SIP/2.0
Via: SIP/2.0/UDP 192.168.1.67:5060;branch=z9hG4bK.mc65Cu9mA;rport
From: <sip:address@hidden>;tag=W4WM7gL-i
CSeq: 21 REGISTER
Call-ID: acLlp0GERz
Max-Forwards: 70
Supported: replaces, outbound
Contact: <sip:address@hidden>;+sip.instance="<urn:uuid:401d52e9-57d3-40fb-9d27-a21054a66dbd>"
Expires: 3600
User-Agent: Linphone/3.6.99 (belle-sip/1.2.4)
Authorization:  Digest realm="sip.linphone.org", nonce="y3V81gAAAACdQ9hmAACGJL46cwcAAAAA", opaque="+GNywA==", username="grannycam2-bbb",  uri="sip:sip.linphone.org", response="8a89734a23a2c6a2bf826ef19685101c", cnonce="0555643d", nc=00000001, qop=auth


message: channel [0x1f8dd8]: received [444] new bytes from [UDP://sip.linphone.org:5060]:
SIP/2.0 200 Registration successful
Via: SIP/2.0/UDP 192.168.1.67:5060;branch=z9hG4bK.mc65Cu9mA;rport
Record-Route: <sip:address@hidden:5060;lr>
From: <sip:address@hidden>;tag=W4WM7gL-i
To: <sip:address@hidden>;tag=9Xm6BjFZ7r28a
Call-ID: acLlp0GERz
CSeq: 21 REGISTER
Contact: <sip:address@hidden>;expires=3600;q=0.00
server: Flexisip/0.6.0 (sofia-sip-nta/2.0)
Content-Length: 0


message: channel [0x1f8dd8] [444] bytes parsed
message: Found transaction matching response.
message: Changing [client] [REGISTER] transaction [0x2532f0], from state [TRYING] to [COMPLETED]
message: Refresher [0x21f4a0]:  has no contact for request [0x2a1e40].
message: Refresher: scheduling next timer in 3240000 ms
message: Register refresher  [200] reason [Registration successful] for proxy [sip:address@hidden]
message: Proxy config [0x127a38] for identity [sip:address@hidden] moving from state [LinphoneRegistrationProgress] to [LinphoneRegistrationOk]
message: Garbage collecting unowned object of type belle_sip_header_contact_t
message: Changing [client] [REGISTER] transaction [0x21f0c8], from state [COMPLETED] to [TERMINATED]
message: Client internal REGISTER transaction [0x21f0c8] terminated
message: Changing [client] [REGISTER] transaction [0x2532f0], from state [COMPLETED] to [TERMINATED]
message: Client internal REGISTER transaction [0x2532f0] terminated
message: channel [0x1f8dd8]: keep alive sent to [UDP://sip.linphone.org:5060]
message: channel [0x1f8dd8]: keep alive sent to [UDP://sip.linphone.org:5060]
message: channel [0x1f8dd8]: keep alive sent to [UDP://sip.linphone.org:5060]
message: channel [0x1f8dd8]: keep alive sent to [UDP://sip.linphone.org:5060]
message: channel [0x1f8dd8]: keep alive sent to [UDP://sip.linphone.org:5060]


I look forward to your thoughts, and thanks very much for your support.

Kind regards,
Charles Hamilton




On Wed, Jan 8, 2014 at 2:33 PM, Guillaume BIENKOWSKI <address@hidden> wrote:
Hey Charles,

Thanks for the congratulations!
I have a BB Black at home as well, so if you are successful with it, I’ll be happy to try at home as well.
Feel free to drop me a mail if you need help on this.

Cheers,
Guillaume

Le 8 janv. 2014 à 20:09, Charles Hamilton <address@hidden> a écrit :

Congratulations on the new release!

After a quick install and review of the new MacOS (linphone-latest.app.zip) version, I'm happy to report that it appears far more stable on a MacBook Pro.

Over the next few days, I'll be testing Linphone on the Beaglebone Black, my main area of development. Since I had little success with the prior releases, I"ll be very eager to report back with results on the following (all Armv7 environments) :

- Debian 7.2
- Ubuntu 12.04
- Ubuntu 13.10
- Arch Linux
- Android

Thanks and congrats again on the new release.

Charles Hamilton
HudsonWerks
http://www.hudsonwerks.com




On Wed, Jan 8, 2014 at 11:55 AM, Margaux Clerc <address@hidden> wrote:
Dear developers and users,

A preview release for the next version of Linphone is available here :


This new version brings signifiants improvements and a new SIP stack, Belle-Sip.
A tarball version if Belle-sip is available :



+Application level improvements:
* It is now possible to configure multiple proxy accounts with different transports (UDP, TCP, TLS)
* can work with IPv6 and IPv4 simultaneously
* User can choose video rendering method on Linux
* Video HD formats support added, leveraging on multiple cores for encoding if available
* Keyboard can be used for DTMF input
* Faster and highly responsive UI thanks to fully asynchronous operation of the liblinphone.
* Add-on of opus codec

+Liblinphone level improvements thanks to new "belle-sip" SIP stack:
* multiple SIP transports simultaneously now allowed
* IP dual stack: can use IPv6 and IPv4 simultaneously
* fully asynchronous behavior: no more lengthly DNS or connections 
* sip.instance parameter (RFC5626)
* alias parameter (RFC5923)
* better management of network disconnections
* SIP/TLS handled through lightweight polarssl library (instead of openssl)
* SIP transaction state machines improved (RFC6026)
* Privacy API (RFC3323, RFC3325)
* Full support of rich presence in (RFC4480)
* Better handling of sips scheme in URIs.


You can aslo download the daily build version of Linphone for Windows and Mac :

Windows :

Mac :


Don't hesitate to send translations, feedbacks or bug reports.

Cheers,

_______________________________________________
Linphone-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-users


_______________________________________________
Linphone-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-users


_______________________________________________
Linphone-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-users




reply via email to
[Prev in Thread] Current Thread [Next in Thread]