|
From: | vikas goel |
Subject: | [Linphone-developers] Issue running Linphone in MOTO G devices. |
Date: | Fri, 5 Dec 2014 16:30:33 +0530 |
Hi, we are facing issue in running linphone in MOTO G android devices, all the MOTOROLA devices given SIGSEGV at the time of 200K received from the the other side, it seems motorola devices does not like to give control to linphone. here is the logs attached just before the error. 12-04 14:59:51.287: I/linphone(17762): configuring resampler output to rate=[44100], nchannels=[1] 12-04 14:59:51.287: I/linphone(17762): ms_filter_link: MSFilePlayer:0x55e80c60,0-->MSDtmfGen:0x54b1d238,0 12-04 14:59:51.287: I/linphone(17762): ms_filter_link: MSDtmfGen:0x54b1d238,0-->MSResample:0x55de9218,0 12-04 14:59:51.287: I/linphone(17762): ms_filter_link: MSResample:0x55de9218,0-->MSAndroidSndWrite:0x54b1c678,0 12-04 14:59:51.288: W/linphone(17762): Could not set voip=on: err=-38. 12-04 14:59:51.288: I/linphone(17762): AudioTrack: min frame count is 5644 12-04 14:59:51.290: I/linphone(17762): Priority used: 99 12-04 14:59:51.290: I/linphone(17762): Ring MSTicker priority increased to maximum. 12-04 14:59:51.290: I/linphone(17762): incStrong(0x5524c990) 12-04 14:59:51.290: A/libc(17762): Fatal signal 11 (SIGSEGV) at 0x40bbf974 (code=2), thread 17894 (Linphone schedu) 12-04 14:59:51.367: D/linphone(17762): Proximity sensor report [100.0] , for max range [100.0] regards -Vikas Goel |
[Prev in Thread] | Current Thread | [Next in Thread] |