[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linphone-users] How to establish media path
From: |
Ravi Chandra T R |
Subject: |
[Linphone-users] How to establish media path |
Date: |
Thu, 30 Oct 2008 18:37:26 +0530 |
Hi,
I am using Linphone 2.99.1 version.
After establishing signaling path between Linphone and UAS, Mediapath is
not established.
When I use other softphone(Xlite & phonerlite) both signaling and Voice
path is established. I changed the audio ports of linephone to 5066
which was used by (xlite and phonerlite), but still media path is not
established.
All the codecs in Linephone is enabled.
Please anybody let me know any configuration as to be done to establish
media path.
Regards,
Ravi
============================================================================================================================
Disclaimer:
This message and the information contained herein is proprietary and
confidential and subject to the Tech Mahindra policy statement, you may review
the policy at <a
href="http://www.techmahindra.com/Disclaimer.html">http://www.techmahindra.com/Disclaimer.html</a>
externally and <a
href="http://tim.techmahindra.com/Disclaimer.html">http://tim.techmahindra.com/Disclaimer.html</a>
internally within Tech Mahindra.
============================================================================================================================
Re: [Linphone-users] How to control linphonec with other aplication? pipes?, Alastair Johnson, 2008/10/16