RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at./ltibline599.

[Stuart Hughes]

Hi Vin,

You need to paste your errors for crosstool and submit them to the
crossgcc list.  They should be able to help.

Not sure about the exact placing of patches for the toolchain rpms.

Regards, Stuart

On Mon, 2006-12-11 at 09:42 -0500, Sesto, Vin wrote:
> It did try to do this but it failed. It seemed to be able to get other
> files.
> 
> BTW which directory should patches go in? Should they go in the
> TARBALLS_DIR or some other directory? Or, at the root of where the
> script is run or in the patches subdir?
> 
> -----Original Message-----
> From: Stuart Hughes [mailto:address@hidden 
> Sent: Saturday, December 09, 2006 7:01 AM
> To: Sesto, Vin
> Cc: address@hidden; address@hidden
> Subject: RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch
> at./ltibline599.
> 
> Hi Vin,
> 
> crosstool should try to download that package over the internet.  You
> have internet access.
> 
> You can get help with gcc and crosstool on the crossgcc list.
> 
> Regards, Stuart
> 
>  
> On Fri, 2006-12-08 at 16:36 -0500, Sesto, Vin wrote
> > What's strange is when I run the crosstool (extracted from
> > crosstool-0.42_fsl26Jun06.tar.gz) during it's build it dies on trying
> to
> > get "glibc-linuxthreads-2.4.tar.gz"
> > 
> > 
> > 
> > -----Original Message-----
> > From: Stuart Hughes [mailto:address@hidden 
> > Sent: Friday, December 08, 2006 4:03 PM
> > To: Sesto, Vin
> > Cc: address@hidden; address@hidden
> > Subject: RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch
> > at./ltibline599.
> > 
> > Hi Vin,
> > 
> > This *is* the cross toolchain that ltib is using for the imx31 BSP (it
> > downloaded it from here and installed it for you).
> > 
> > To build a native version, you need to take the gcc.spec, copy it to
> > gcc-411eabi.spec (or similar).  The basic process in the spec file
> will
> > be okay.  You may need some of the patches though.  These can be found
> > in the .src.rpm version of this file
> > tc-fsl-x86lnx-armeabi-nptl-4.1.1-3.src.rpm.  If it's not on the GPP,
> it
> > can be uploaded.
> > 
> > I'd still like to know though why you want to build a gcc for the
> > target?
> > 
> > Regards, Stuart
> > 
> > On Fri, 2006-12-08 at 15:49 -0500, Sesto, Vin wrote:
> > > Hi Steve
> > > 
> > > I noticed on http://www.bitshrine.org/gpp/
> > > 
> > > There exists an rpm named
> > > 
> > > tc-fsl-x86lnx-armeabi-nptl-4.1.1-3.i386.rpm
> > > 
> > > Does this contain the crosstool and would this allow me to do what I
> > > need to do? I am not having any luck.
> > > 
> > > Thanks.
> > > 
> > > Vin
> > > 
> > > 
> > > -----Original Message-----
> > > From: Steve Papacharalambous [mailto:address@hidden 
> > > Sent: Friday, December 08, 2006 11:53 AM
> > > To: Sesto, Vin
> > > Cc: Stuart Hughes; address@hidden
> > > Subject: RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch
> > > at./ltibline599.
> > > 
> > > Hi Vin,
> > > 
> > > The best place to look for patches is the crosstool project...
> > > 
> > > Without actually doing the modifications it's difficult to give
> exact
> > > details of the changes that would be needed, and I'm pretty
> overloaded
> > > at the moment... :-(
> > > 
> > > Best regards,
> > > 
> > > Steve
> > > 
> > > On Fri, 2006-12-08 at 11:31 -0500, Sesto, Vin wrote:
> > > > Hi Steve 
> > > > 
> > > > So below is the spec file. I can see changing Version to 4.1.1 but
> > > after
> > > > that I'd be guessing! How do I know what to put down for the Patch
> > > > sections?
> > > > 
> > > > Or, perhaps the eabi / nptl support as well? This file is a little
> > > > cryptic to me in that I don't have 100% knowledge and what it's
> > doing!
> > > > 
> > > > Thanks.
> > > > 
> > > > File output follows below:
> > > > 
> > > > Vin
> > > > 
> > > > %define pfx /opt/freescale/rootfs/%{_target_cpu}
> > > > 
> > > > Summary         : Various compilers (C, C++, Objective-C, Java,
> ...)
> > > > Name            : gcc
> > > > Version         : 3.4.3
> > > > Release         : 1
> > > > License         : GPL
> > > > Vendor          : Freescale
> > > > Packager        : Steve Papacharalambous
> > > > Group           : Development/Languages
> > > > Source          : %{name}-%{version}.tar.bz2
> > > > Patch0          : gcc-3.4.0-arm-bigendian.patch
> > > > Patch1          : gcc-3.4.0-arm-lib1asm.patch
> > > > Patch2          : gcc-3.4.0-arm-nolibfloat.patch
> > > > Patch3          : gcc-3.4.3-ccross-syslimits.patch
> > > > Patch4          : pr15068-fix.patch
> > > > Patch5          : pr16201-fix.patch
> > > > Patch6          : gcc-3.4.3-libiberty-cp-demangle.h.patch
> > > > Patch7          : gcc-3.4.3-make-3.81.patch
> > > > BuildRoot       : %{_tmppath}/%{name}
> > > > Prefix          : %{pfx}
> > > > 
> > > > %Description
> > > > %{summary}
> > > > 
> > > > %Prep
> > > > %setup
> > > > %patch0 -p1
> > > > %patch1 -p1
> > > > %patch2 -p1
> > > > %patch3 -p1
> > > > %patch4 -p1
> > > > %patch5 -p1
> > > > %patch6 -p1
> > > > %patch7 -p1
> > > > 
> > > > %Build
> > > > # Temporary hack - stevep
> > > > # For building toolchain components an optimized version of the
> > > > # target is needed.  This should really be defined in the config
> > > > # area of ltib, and not done in the toolchain spec files.
> > > > # For now we assume that the optimised target can be derived by
> > > > # stripping the trailing "-" off the toolchain prefix, but this
> > > > # will not be true for all cases, eg when using uClibc toolchains.
> > > > if [ ${TOOLCHAIN_PREFIX} = "arm_v6_vfp_le-" -o -n "$UCLIBC" ]
> > > > then
> > > >     OPT_CFGHOST=$CFGHOST
> > > > else
> > > >     OPT_CFGHOST=`echo ${TOOLCHAIN_PREFIX} | perl -n -e
> > 's,-$,,;print'`
> > > > fi
> > > > if [  -n "$UCLIBC" ]
> > > > then
> > > >    ENABLE_LANGUAGES="c"
> > > > else
> > > >    ENABLE_LANGUAGES="c,c++"
> > > > fi
> > > > 
> > > > rm -rf build-gcc
> > > > mkdir build-gcc
> > > > cd build-gcc
> > > > export CPP=$BUILDCPP
> > > >     CC_FOR_BUILD="${BUILDCC}" \
> > > >     ../configure \
> > > >     --host=${OPT_CFGHOST} --build=%{_build}
> --target=${OPT_CFGHOST}
> > \
> > > >     --prefix=%{_prefix}/local --disable-nls --enable-threads=posix
> \
> > > >     --enable-symvers=gnu --enable-__cxa_atexit --enable-c99 \
> > > >     --enable-long-long --enable-languages="$ENABLE_LANGUAGES"
> > > > --enable-shared \
> > > >     --mandir=%{_mandir}
> > > > make -j1 all-build-libiberty
> > > > make -j1 all
> > > > 
> > > > %Install
> > > > rm -rf $RPM_BUILD_ROOT
> > > > 
> > > > 
> > > > if [ ${TOOLCHAIN_PREFIX} = "arm_v6_vfp_le-" -o -n "$UCLIBC" ]
> > > > then
> > > >     OPT_CFGHOST=$CFGHOST
> > > > else
> > > >     OPT_CFGHOST=`echo ${TOOLCHAIN_PREFIX} | perl -n -e
> > 's,-$,,;print'`
> > > > fi
> > > > if [ "$TOOLCHAIN_TYPE" = "64" ]
> > > > then
> > > >    SLIBS="lib64"
> > > > else
> > > >    SLIBS="lib"
> > > > fi
> > > > # Copy the crt files from the toolchain area to
> rootfs/usr/local/lib
> > > > # These are the crt files built by glibc (I think - stevep).
> > > > X_DIR=`echo ${OPT_CFGHOST} | sed -e 's,-$,,'`
> > > > TC_PREFIX="`which ${TOOLCHAIN_PREFIX}gcc | perl -p -e
> > > > 's,/bin/'${TOOLCHAIN_PREFIX}'gcc,,'`"
> > > > mkdir -p
> > > >
> > >
> >
> ${RPM_BUILD_ROOT}/%{pfx}/%{_prefix}/local/lib/{,gcc/${X_DIR}/%{version}}
> > > > cp ${TC_PREFIX}/${X_DIR}/${SLIBS}/*.o
> > > > ${RPM_BUILD_ROOT}/%{pfx}/%{_prefix}/local/lib
> > > > cp ${TC_PREFIX}/${X_DIR}/${SLIBS}/*.o
> > > >
> > ${RPM_BUILD_ROOT}/%{pfx}/%{_prefix}/local/lib/gcc/${X_DIR}/%{version}
> > > > 
> > > > cd build-gcc
> > > > make -j1 DESTDIR=${RPM_BUILD_ROOT}/%{pfx} install
> > > > 
> > > > # Remove the c++ pre-compiled header files.
> > > > X_DIR=`echo ${TOOLCHAIN_PREFIX} | sed -e 's,-$,,'`
> > > > rm -f
> > > >
> > >
> >
> ${RPM_BUILD_ROOT}/%{pfx}/%{_prefix}/local/include/c++/%{version}/${X_DIR
> > > > }/bits/stdc++.h.gch/O[02]g
> > > > 
> > > > # Remove libtool .la files
> > > > find $RPM_BUILD_ROOT/%{pfx} -name \*.la -exec rm {} \;
> > > > 
> > > > # add a symlink for cc
> > > > ln -s gcc ${RPM_BUILD_ROOT}/%{pfx}/%{_prefix}/local/bin/cc
> > > > 
> > > > %Clean
> > > > rm -rf ${RPM_BUILD_ROOT}
> > > > 
> > > > 
> > > > %Files
> > > > %defattr(-,root,root)
> > > > %{pfx}/*
> > > > 
> > > > 
> > > > address@hidden:/home/vin/LTIB-from-cvs/ltib/dist/lfs-5.1/gcc#
> > > > 
> > > > -----Original Message-----
> > > > From: Steve Papacharalambous [mailto:address@hidden 
> > > > Sent: Friday, December 08, 2006 11:07 AM
> > > > To: Sesto, Vin
> > > > Cc: Stuart Hughes; address@hidden
> > > > Subject: RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch
> > > > at./ltibline599.
> > > > 
> > > > Hi Vin,
> > > > 
> > > > If you look in dist/lfs-5.1/gcc there are some gcc spec files.
> > These
> > > > are rpm spec files which ltib uses to build gcc.  The best way for
> > you
> > > > to get a working gcc-4.1.1 for arm eABI targets is to make a copy
> of
> > > > gcc.spec in this directory and call it gcc-4.1.1.spec  Then you
> need
> > > to
> > > > modify this file accordingly so that it builds an arm eabi target.
> > > > 
> > > > Once you have done this you need to edit
> > > > config/platform/imx31ads/pkg_map and add the following line:
> > > > 
> > > > PKG_GCC =  gcc-4.1.1
> > > > 
> > > > That should get ltib to build gcc-4.1.1 for the imx31ads BSP,
> > > > 
> > > > Best regards,
> > > > 
> > > > Steve
> > > > 
> > > > On Fri, 2006-12-08 at 10:30 -0500, Sesto, Vin wrote:
> > > > > Hi Steve
> > > > > 
> > > > > Thanks for your reply. Ltib is currently building and am hoping
> it
> > > > > builds OK before I venture onto the next step ... which is to
> > build
> > > a
> > > > > native gcc supporting eabi/nptl version 4.1.1 
> > > > > 
> > > > > I guess I need a little more clarification as to your statement
> of
> > > the
> > > > > gcc spec file in ltib will need some work to build a native gcc
> > for
> > > > arm
> > > > > eabi targets. I am new to this so don't mind my trivial
> questions.
> > > > > 
> > > > > Could you please give me some hints as to how I should go about
> > > > > achieving the native gcc 4.1.1 build versus the 3.4.3? I guess
> > > that's
> > > > > been part of my issue all along.
> > > > > 
> > > > > Thanks.
> > > > > 
> > > > > Vin
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > -----Original Message-----
> > > > > From: Steve Papacharalambous [mailto:address@hidden 
> > > > > Sent: Friday, December 08, 2006 10:20 AM
> > > > > To: Sesto, Vin
> > > > > Cc: Stuart Hughes; address@hidden
> > > > > Subject: RE: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at
> > > > > ./ltibline599.
> > > > > 
> > > > > Hi Vin,
> > > > > 
> > > > > Your approach is correct, once you have ltib installed you can
> > > > normally
> > > > > select the gcc package and it will build gcc for the target root
> > > file
> > > > > system.  You don't need to put the cross compiler in your PATH
> as
> > > ltib
> > > > > takes care of all this for you.
> > > > > 
> > > > > However the gcc spec file currently in ltib builds gcc-3.4.3, so
> > if
> > > > you
> > > > > want a non eABI generic arm gcc then this should work for you,
> but
> > > if
> > > > > you need an arm eABI toolchain then you need a later version of
> > gcc.
> > > > In
> > > > > summary the gcc spec file in ltib will need some work to build a
> > > > native
> > > > > gcc for amr eABI targets,
> > > > > 
> > > > > Best regards,
> > > > > 
> > > > > Steve
> > > > > 
> > > > > On Fri, 2006-12-08 at 09:46 -0500, Sesto, Vin wrote:
> > > > > > Hi Stuart
> > > > > > 
> > > > > > I am going to try this ASAP.
> > > > > > 
> > > > > > Let me back up here for a second. My main goal is to get a
> > rootfs
> > > > and
> > > > > a
> > > > > > native gcc built using LTIB. How should I go about doing this.
> > > > > > 
> > > > > > Please tell me if my logic is in error below.
> > > > > > 
> > > > > > 1. Get the CVS fix you mentioned below
> > > > > > 2. Run LTIB
> > > > > > 3. This produces a gcc that runs on intel platform which
> > generates
> > > > ARM
> > > > > > instructions.
> > > > > > 4. This also produces a rootfs and a linux kernel image.
> > > > > > 5. Next, I want to create a native gcc for the iMX31. How do I
> > > > achieve
> > > > > > this? I thought I could run ./ltib --configure and select gcc
> > and
> > > > > other
> > > > > > necessary libs (ie, binutils etc) and it would produce a
> native
> > > ARM
> > > > > gcc.
> > > > > > I guess one thing I should be sure to do is to make the
> > > > cross-compiled
> > > > > > gcc be first in my PATH ...
> > > > > > 
> > > > > > Does this sound like the correct approach?
> > > > > > 
> > > > > > Thanks.
> > > > > > 
> > > > > > Vin
> > > > > > 
> > > > > > 
> > > > > > -----Original Message-----
> > > > > > From: Stuart Hughes [mailto:address@hidden 
> > > > > > Sent: Friday, December 08, 2006 6:03 AM
> > > > > > To: Sesto, Vin
> > > > > > Cc: address@hidden
> > > > > > Subject: Re: [Ltib] Can't get: linux-2.6.16-mx31-sdio.patch at
> > > > ./ltib
> > > > > > line599.
> > > > > > 
> > > > > > Hi Vin,
> > > > > > 
> > > > > > This patch got pushed out today, so it's now available.  If
> you
> > > try
> > > > > > again the kernel should build.
> > > > > > 
> > > > > > Why do you need to build gcc-4.1.1? there is a toolchain
> already
> > > > > > available for this BSP ("ARM
> > > > gcc-4.1.1,VFP,gnueabi/glibc-2.4-nptl-3"),
> > > > > > and it has had some testing.
> > > > > > 
> > > > > > Regards, Stuart
> > > > > > 
> > > > > > On Thu, 2006-12-07 at 10:12 -0500, Sesto, Vin wrote:
> > > > > > > Hello
> > > > > > > 
> > > > > > >  
> > > > > > > 
> > > > > > > I have just updated my LTIB from CVS and got this error.
> > > > > > > 
> > > > > > >  
> > > > > > > 
> > > > > > > Can?t get: linux-2.6.16-mx31-sdio.patch at ./ltib line 599.
> > > > > > > 
> > > > > > >  
> > > > > > > 
> > > > > > > I am trying to build for an MX31 with eabi / nptl support.
> > > > > > > 
> > > > > > >  
> > > > > > > 
> > > > > > > I need to be able to build gcc 4.1.1 for this target,
> however,
> > I
> > > > > can?t
> > > > > > > even build without making any changes before even attempting
> > > that
> > > > > > > feat!
> > > > > > > 
> > > > > > >  
> > > > > > > 
> > > > > > > Thanks.
> > > > > > > 
> > > > > > >  
> > > > > > > 
> > > > > > > V
> > > > > > > 
> > > > > > > 
> > > > > > > _______________________________________________
> > > > > > > LTIB home page: http://bitshrine.org
> > > > > > > 
> > > > > > > Ltib mailing list
> > > > > > > address@hidden
> > > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > > > 
> > > > > > 
> > > > > > _______________________________________________
> > > > > > LTIB home page: http://bitshrine.org
> > > > > > 
> > > > > > Ltib mailing list
> > > > > > address@hidden
> > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > > > 
> > > > > 
> > > > 
> > > 
> > 
>