RE: [Ltib] ltib v7.2.1 - imx27ads - alsa-utils-1.0.11rc2 - package isnot generated

[Estevam Fabio-R49496]

Hi Selso,

 

You can try both ways:

 

./ltib -p alsa-utils -m prep

or

 

./ltib -p alsa-utils-1.0.11rc2.spec -m prep

and you should get the source at rpm/BUILD/alsa-utils-1.0.11rc2

Regards,

 

Fabio Estevam

 

---

From: address@hidden [mailto:address@hidden On Behalf Of Selso LIBERADO
Sent: Wednesday, September 03, 2008 5:36 AM
To: address@hidden
Subject: [Ltib] ltib v7.2.1 - imx27ads - alsa-utils-1.0.11rc2 - package isnot generated

Hello !

I have tried to install alsa-utils but the following errors appears to me :

{
Processing platform: Freescale IMX27 ADS reference board
==========================================================
using config/platform/imx27ads/.config

Processing: alsa-utils-1.0.11rc2
==================================
rpmbuild --dbpath /ltib-ads/rpmdb --define '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' --define '__strip strip' --define '_topdir ltib-ads/rpm' --define '_prefix /usr' --define '_tmppath /ltib-ads/tmp' --define '_mandir /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir /var' -bb  --clean --rmsource  /ltib-ads/rpm/SPECS/alsa-utils-1.0.11rc2.spec
Executing(%prep): /bin/sh -e /ltib-ads/tmp/rpm-tmp.87824
+ umask 022
+ cd /ltib-ads/rpm/BUILD
+ exit 0
Executing(%build): /bin/sh -e /ltib-ads/tmp/rpm-tmp.87824
+ umask 022
+ cd /ltib-ads/rpm/BUILD
+ exit 0
Executing(%install): /bin/sh -e /ltib-ads/tmp/rpm-tmp.87824
+ umask 022
+ cd /ltib-ads/rpm/BUILD
+ /opt/freescale/ltib/usr/lib/rpm/brp-compress
/opt/freescale/ltib/usr/lib/rpm/brp-compress: line 8: cd: /ltib-ads/tmp/alsa-utils: No such file or directory
+ /opt/freescale/ltib/usr/lib/rpm/brp-strip
find: /ltib-ads/tmp/alsa-utils: No such file or directory
+ /opt/freescale/ltib/usr/lib/rpm/brp-strip-comment-note
find: /ltib-ads/tmp/alsa-utils: No such file or directory
Processing files: alsa-utils-1.0.11rc2-0
error: File not found by glob: /ltib-ads/tmp/alsa-utils/opt/freescale/rootfs/arm/*

RPM build errors:
    File not found by glob: /ltib-ads/tmp/alsa-utils/opt/freescale/rootfs/arm/*
Build time for alsa-utils-1.0.11rc2: 0 seconds

Failed building alsa-utils-1.0.11rc2


f_buildrpms() returned an error, exiting

Started: Wed Sep  3 10:05:52 2008
Ended:   Wed Sep  3 10:05:52 2008
Elapsed: 0 seconds

These packages failed to build:
alsa-utils-1.0.11rc2
Build Failed
}

I also have tried to make a 'step by step build' with ./ltib -m prep -p alsa-utils-1.0.11rc2, but the source package is not installed in ./rpm/BUILD. However I can see the tarball in http://www.bitshrine.org/gpp/ and in my LPP correctly configured in ./ltibrc (I checked md5sum), so what's wrong ?