Re: [Ltib] updating u-boot package broke compilation

[Rupesh Kumar]

Hi 

Sorry for the confusion and not including list in my reply.

I want to know about where shall i update the patch information so that 
when i install my ISO it gets compiled.  I have already included this info 
in spec file, is there any other place also which i missed ?

Thanks
Rupesh





Stuart Hughes <address@hidden> 
09/15/2009 09:49 PM

To
Rupesh Kumar <address@hidden>
cc
"address@hidden" <address@hidden>
Subject
Re: [Ltib] updating u-boot package broke compilation






Hi Rupesh,

Is your question about the compilation error or needing to manually copy 
when installed from your new ISO image? please be clear and provide 
relevant information.

Also please keep message on the list.

Regards, Stuart

Rupesh Kumar wrote:
> Hi Stuart,
> 
> Thanks for your reply. 
> I have created patch for kernel also and that works fine. In the same 
> manner i created patch for u-boot also(which is breaking compilation).
> As i have told earlier, only different thing for u-boot i did was, i 
have 
> updated version of u-boot from 1.1.6 to 1.3.0. 
> i have updated this info in platform config files, I just want to know 
is 
> there any other place also where i should mention about this change?
> 
> Thanks
> Rupesh
> 
> 
> 
> 
> Stuart Hughes <address@hidden> 
> 09/15/2009 09:29 PM
> 
> To
> Rupesh Kumar <address@hidden>
> cc
> address@hidden
> Subject
> Re: [Ltib] updating u-boot package broke compilation
> 
> 
> 
> 
> 
> 
> Hi Rupesh,
> 
> This is really outside the scope of this forum as this is a version of 
> LTIB is not in Savannah public CVS.
> 
> However, I'd guess that by whatever means you're making the ISO image, 
> you not made sure that the new patch/sources are copied into the ISO 
> pkgs directory.
> 
> Regards, Stuart
> 
> Rupesh Kumar wrote:
>> Hi all,
>>
>> I am using MPC8313E_RDB_K26_20070831-LTIB.iso released by freescale for 

>> MPC8313ERDB board. This LTIB comes with u-boot version 1.1.6 which i 
>> updated to 1.3.0. I made ISO image for updated LTIB. When i tried to 
>> install ltib & extract u-boot it did not compile & tried to connect to 
>> internet.
>>
>>
> 
///////////////////////////////////////////////////////////////////////////////////////////////////
>> $ ./ltib -m prep -p u-boot-1.3.0-mpc8313erdb_revc.spec
>>
>> Processing platform: Freescale MPC8313E RDB PowerPC board
>> ===========================================================
>> using config/platform/mpc8313erdb/.config
>>
>> Processing: u-boot-1.3.0-mpc8313erdb_revc
>> ===========================================
>> Testing network connectivity
>> Testing proxy connection for GPP :
>>
>>
>> INT at ./ltib line 2275.
>> Exiting on error or interrupt
>> $
>>
> 
///////////////////////////////////////////////////////////////////////////////////////////////////
>> This problem got fixed & it got compiled when i copied new patch for 
the 
> 
>> u-boot source i.e.
>>         $ cp /opt/freescale/pkgs/S600-u-boot-1.3.0-Rev21_1.patch 
>> rpm/SOURCES/ 
>>
>> Can anyone please tell what shall i do so that it gets compiled without 

> me 
>> coping the above file.
>>
>>
>>
>> Thanks
>> Rupesh
>>
>>
>>
>> _______________________________________________
>> LTIB home page: http://ltib.org
>>
>> Ltib mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/ltib
>>
> 
> 
>