ltib
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Ltib] Special tag localdir_nobuild causes LTIB to go to the config


From: Stuart Hughes
Subject: Re: [Ltib] Special tag localdir_nobuild causes LTIB to go to the config screen.
Date: Thu, 29 Oct 2009 09:08:53 +0000
User-agent: Thunderbird 2.0.0.16 (X11/20080707)

Hi Aaron,

Yes, any config symbols *WANT_CF and *LEAVESRC are transient one-shots.

'Leave the sources after building' is a one-shot option (like 'Configure
the kernel').  The main reason is because otherwise manually turning it
off would be detected as a config change and cause the kernel package to
try to rebuild.  This does not mean the kernel source will be removed.
As always, once source is blown out, the only way to remove it is
manually (with rm), this is intentional.

You are right that PKG_KERNEL_WANT_CF should not be selected by LEAVESRC. Please send a patch.

Regards, Stuart


address@hidden wrote:
Hi Stuart.  Actually, your previous attempt to fix this by avoiding the
call to `./ltib -m clean` in the case of localdir_nobuild in the
bin/Ltibrelease.pm script was necessary as well.  The way it was before
caused my config/platform/mpc8349itx/.config file to be copied to
config/platform/mpc8349itx/.config.bak, and the new .config file had

# CONFIG_PKG_KERNEL_LEAVESRC is not set

instead of

CONFIG_PKG_KERNEL_LEAVESRC=y

Without your fix my "localdir_nobuild" iso test release wouldn't have
worked right because my kernel module package expects that the kernel
source is unpacked in the BUILD directory so that it can utilize its
kbuild infrastructure.  So, I needed that part of the fix too.  It appears
that this CONFIG_PKG_KERNEL_LEAVESRC variable gets cleared every time you
run the LTIB.  Is this correct?  Why does the variable get cleared every
time?

Also, I think I've found one more bug.  In most of the
config/platform/%{ARHC}/main.lkc files, selecting
CONFIG_PKG_KERNEL_LEAVESRC does not imply selecting PKG_KERNEL_WANT_CF. However, for the platforms mpc8349itx and ep93xx the main.lkc files look
like:

config PKG_KERNEL_LEAVESRC
    depends ! KERNEL_NONE
    select PKG_KERNEL_WANT_CF
    bool "Leave the sources after building"
    default n
    help
      This is a one shot option that can be used to build the kernel and
      leave the build source tree in rpm/BUILD in place

I think the line "select PKG_KERNEL_WANT_CF" should be removed for correct
functionality and to match the majority of the other main.lkc files.


Thanks,

Aaron

Hi Aaron,

Agreed, after looking into this I'm going the change you suggest.

Regards, Stuart


address@hidden wrote:
The platform I'm using is mpc8349itx.  If I remove the file

config/platform/mpc8349itx/.config

then typing `./ltib` drops me to the configuration menu

"LTIB: Freescale MPC8349E-mITX board"

If I have the config file, `./ltib` proceeds with the build without
going
to the configuration menu.

At first glance it seems like the config file you say should not be
created needs to be present to avoid the menu.  The patch I submitted
was
working for the localdir_nobuild special tag when applied to CVS
revision
1.5 of bin/Ltibrelease.pm.

Aaron

Hi Aaron,

Please keep messages on the list.

I agree that a platform should be pre-chosen, so the top level .config
should be there.  I'll look at fixing this, but not sure when (feel
free
to submit another patch).  The reason your patch is not quite right is
that the platform config should not be created (the one in
config/platform/_target_).

Regards, Stuart

address@hidden wrote:
Hi Stuart, how's everything?

I think I liked the old way or my modified version better, because at
least I would have an iso that I could mount, run `install`, change
directory to non-distributable-*, then run `ltib` to build the entire
release.

With your newest modifications the iso is bundled without a .config in
the
base non-distributable-* directory, and running `ltib` only builds the
host packages, then drops me to the configuration menu.  This is less
like
a BSP, because it's not specific to my platform, and more like the
LTIB
itself, which can be used for lots of platforms.  I don't think the
configuration menu should be invoked at all, either in producing the
iso
with the localdir_nobuild tag, or when installing the BSP from the iso
onto another machine.

Thanks,

Aaron

Hi Aaron,

That's not quite right, you don't want to do any building for
"localdir_nobuild".  I've checked in a fix that I think addresses
this.

Regards, Stuart

address@hidden wrote:
I would recommend the patch following the diff command for the test
release mode with the localdir_nobuild tag.  Instead of dropping the
user
to the configure screen, the LTIB should be using the preconfig file
config/platform/${ARCH}/defconfig to produce the test release iso
file.


$ diff -aur Ltibrelease.pm Ltibrelease.pm.noconfigscr
--- Ltibrelease.pm      2009-10-26 14:15:37.898242755 -0400
+++ Ltibrelease.pm.noconfigscr  2009-10-26 14:17:03.037301396 -0400
@@ -399,6 +399,8 @@
 if [  "$tag" != "localdir_nobuild" ]
 then
     ./ltib --preconfig $cf->{plat_dir} --configure --batch
+else
+    ./ltib --preconfig $cf->{plat_dir} -m config --batch
 fi

 # copy the pre-built images if any to the iso so usable without
ltib




_______________________________________________
LTIB home page: http://ltib.org

Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib





_______________________________________________
LTIB home page: http://ltib.org

Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib





_______________________________________________
LTIB home page: http://ltib.org

Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib





reply via email to

[Prev in Thread] Current Thread [Next in Thread]